A dry, synthetic, easy-to-use, pressure sensitive adhesive. Allows repositioning of artwork until bond is made permanent. Just unroll PMA adhesive side up, position artwork, and cut the PMA flush or leave a narrow border for trimming. Place the artwork face up on the release paper, protect with slip sheet and rub with a squeegee or roller to transfer adhesive to back of the artwork. Remove the liner and position the adhesive coated artwork on the mounting surface. Cover with a slip sheet and rub with squeegee or use the C-35 PMA applicator for a permanent bond.
Reviewed by 2 customers
I bought this as an alternative to send out project photos to be dry-mounted in our architecture firm's office. This not only saved us a few hundred dollars...but we have half the roll left for future mounting. We have tried to use spray mounts in the past and they have never come close to the results we achieved with this product.
I used this stuff as a graphic designer in the Marine Corps and it's awesome. No over spray or mess as with the canned stuff and holds stronger and longer than other adhesives.