EZ Sensor Cleaning kits contain 4 patented Vswabs for better maneuverability inside the camera's chamber area and to produce streak-free swabbing motion with with 1 ml of the Smear Away cleaner in small vials ready to go.
The advantages of this kit is not only its affordability but also the reduced size and amount of cleaner,(1ml), making it safe to travel eliminating the need to carry large bottles of liquids at airports.
There are three sizes kits which include 1.6X (16 mm), 1.3X (20 mm), and 1.0X (24 mm) covering all cameras manufacturer including fourth and micro fourth system sensor sizes. The cleaning solutions are safe on all coated sensor including Nikon and Canon new coatings.
"Smear Away" removes even the toughest stain such as lubricants on first pass, reducing the number of swabs used compared to conventional alcohol based sensor cleaning liquids.
Most Liked Positive Review
Worked as expected
Cleaned sensor in one try. Very easy to use.
Reviewed by 39 customers
Kit came as advertised; I was hoping to remove a stubborn dust spot on my sensor and tried the product. It made matters worse, instead I ended up with multiple dust spots which I had to use another method to eliminate. No, I would not use this product again.
Works better than other products I've used. Simple, clean and residue free.
It is very easy to use on my Nikon D7100, the size is perfect and just take a moment to clean it up.
Worked well, and comes with easy to follow instructions.
It's a bit pricy, but it works. It's made in Canada. Product packaging looks more like dollar store quality than the price tag may suggest. The swab tip fits m4/3 size sensor pretty well, and can be used for APS-C or FX sensor. I used this to remove a tough stain on my EM5 sensor. The stain was gone after some gental massage, and the sensor looked as good as new. No mess, no fuss. The whole process took me less than 3 minutes.
It took two swabs to get my D800 sensor (filter in front) clean, but that's most probably because it was so filthy to begin with. Before starting it was smeared with an Exxon Valdez sized oil slick. I thought the camera needed a "Nikon return for CLA" treatment, but Visible Dust did the job. Don't be afraid, view a U-tube video or two first if you're unsure....
It is easy to use just follow the video from the web site. However I had to buy the smear removal too to get ride of the dirt. VDust is good for "the second run" to remove the liquid lines if you applied too much on the sensor. My sensor is clean now (it took me 4 runs to clean it).
I used to service my Canon 5D at Calumet and they were great, except it was a pain to drop the camera off on certain days for cleaning. I was scared to do it myself because obviously it's easy to damage the sensor, but not any more. It was exposed to beach, dirt (from backpacking), and just normal lens changing etc. I had 8 easily noticable spots. Since the 5d has no self cleaning feature I think this is the most effective solution. Directions are simple, wet swab with the included solution and wipe. Visable dust offers different solutions for your needs (dry to oily dirt?). I think this kit is perfect for a typical real life situation.
I was a little confused on what to do with the lid on the little liquid bottle but figured it out after a little bit. Once I got that one figured out, I was able to clean the sensor with the the camera set to Mirror Up mode. It is super easy to use and real clean. You just need to make sure to open up your camera in a calm room so wind is not causing more problem when you raise the mirror up.