50% Off
Crown Audio XTi 1002 275W Stereo Power Amplifier, 20Hz to 20kHz Frequency Response, 1.4Vrms Input Sensitivity


Our Price

Buy more and save
Quantity Discount

The quantity discount will be reflected in your shopping cart

List Price: $998.00

Availability: Special Order Special Order - Usually ships in 3-7 days.
Your card will only be charged once item ships.

Free Shipping

See all shipping options

Ways To Save

Product Highlights

  • Peak Plus Limiters
  • Provides user control over frequency gain & filter type
  • Enhanced Subharmonic Synth section
  • 3 User-defined fan
  • Provides software visibility of AC line voltage and power supply temperature
  • New system monitoring
  • Integrated cast-aluminum handles
  • Provides a secure connection between the amplifier and power cord
Crown Audio : Picture 1 regular $499.00

About Crown Audio

The Crown Audio XTi 1002 Power Amplifier delivers up to 275W per channel at 8 ohms and is an ideal solution for sound reinforcement, nightclub installation, bands, theaters, DJ applications and much more. The XTi 1002 offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback. It has a switch-mode universal power supply, so it can be used anywhere. It handles a wide range of speaker impedances and outputs for a high degree of system compatibility.

An array of serious control features are implemented and easily accessed via the included HiQnet Band Manager & System Architect software packages. Crown's Peak Plus Limiters provide the ultimate in system performance and protection. There are 3 user-defined fan modes, adjustable EQ, adjustable crossover filters and much more.

Crown Audio Features

  • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet Band Manager and System Architect control software
  • Increased number of presets to a total of 30; 29 of which are user definable

Crown Audio Specifications

Output Power
700W @ 2 Ohms Stereo (per Channel)
500W @ 4 Ohms Stereo (per Channel)
275W @ 8 Ohms Stereo (per Channel)
1400W @ 4 Ohms Bridged-Mono
1000W @ 8 Ohms Bridged-Mono
1.4 Vrms
Frequency Response
(at 1 watt, 20 Hz - 20 kHz) +0 dB, -1 dB
Signal-to-Noise Ratio
100 dB (A weighted)
Total Harmonic Distortion (THD)
< 0.5%
Damping Factor 20 Hz to 1 kHz
> 500
Crosstalk (below rated power)
20 kHz - 1 kHz: > 70 db
Input Impedance (nominal)
20k ohms balanced, 10k ohms unbalanced
Maximum Input Signal
+22 dBu typical
AC Line Voltage/Frequency Configurations
100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
AC Line Current
6.8A; no more than 38W at idle
Operating Temperature
0 Deg.C to 40 Deg.C at 95% relative humidity (non-condensing)
Two front-panel rotary level controls, one for each channel
Power Switch
On/Off switch applies AC power to the amplifier
Sel/Prev/Next Buttons
Three buttons near the LCD screen that are used to access menu items and front panel lockout
LCD Screen
Backlit liquid crystal display that shows preset and processing status
Signal Indicator
Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
-10 Indicator
Green LED flashes when output signal exceeds -10 dB below clip.
-20 Indicator
Green LED flashes when output signal level exceeds -20 dB below clip.
Ready Indicator
Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip Indicator
Red LED, one per channel, turns on at the threshold of audible distortion
Temp Indicator
Red LED, one per channel, illuminates under excessive temperature conditions
Power Indicator
Blue LED illuminates when the amplifier has been turned on and has power
Input Connectors
XLR, one per channel
Link/Out Connector
Loop-thru signal from input connector for linking another amplifier, one per channel.
Output Connectors
Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
HiQnet USB Connector
Type B, connects to HiQnet network.
Front Panel
Proportional speed fan with front-to-rear airflow.
Dimensions (W x H x D)
19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
18.5 lbs (8.4kg)
Mfr #
Share this item:
Adorama.com is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.