Our New York City store will be closing at 5:00PM today and CLOSED on March 5 in observance of the Purim Holiday
Crown Audio

Crown Audio XTi 2002 475W Stereo Power Amplifier, 20Hz to 20kHz Frequency Response, 1.4Vrms Input Sensitivity

Special Order Item - This is a special order item that is Non Cancelable and Non Returnable. We Charge you when you place your order. Approximate arrival at Adorama 3-7 Days from date of order.
Why Adorama?
Easy Returns, Fast Shipping, Trusted for over 35 years.

Need help? Call 800-223-2500

$1,398.00 List Price

Our Price

$699.00 $28 per week
Free Shipping
Add to Wishlist

Protect your investment

About this item

The Crown Audio XTi 2002 Power Amplifier delivers up to 475W per channel at 8 ohms and is an ideal solution for sound reinforcement, nightclub installation, bands, theaters, DJ applications and much more. The XTi 2002 offers highly accurate sound reproduction with very low distortion, perfect for music or voice playback. It has a switch-mode universal power supply, so it can be used anywhere. It handles a wide range of speaker impedances and outputs for a high degree of system compatibility.

An array of serious control features are implemented and easily accessed via the included HiQnet Band Manager & System Architect software packages. Crown's Peak Plus Limiters provide the ultimate in system performance and protection. There are 3 user-defined fan modes, adjustable EQ, adjustable crossover filters and much more.

What's Included With This Item

  • Crown Audio XTi 2002 Power Amplifier
  • HiQnet Band Manager and System Architect Control Software
  • Crown Audio 3 Year Limited Warranty

Key Features

  • Peak Plus Limiters provide the ultimate in system performance and protection by allowing full control over threshold, attack and release
  • Enhanced Subharmonic Synth section provides user control over frequency, gain and filter type for system-specific tuning
  • 3 User-defined fan mode controls - normal, early and fullspeed - for matching fan performance to a specific application
  • New system monitoring provides software visibility of AC line voltage and power supply temperature
  • Integrated cast-aluminum handles for easy handling and enhanced durability
  • Locking power cord clip provides a secure connection between the amplifier and power cord
  • Updated HiQnet Band Manager and System Architect control software
  • Increased number of presets to a total of 30; 29 of which are user definable

Technical Specs

Output Power 1000W @ 2 Ohms Stereo (per Channel)
800W @ 4 Ohms Stereo (per Channel)
475W @ 8 Ohms Stereo (per Channel)
2000W @ 4 Ohms Bridged-Mono
1600W @ 8 Ohms Bridged-Mono
Sensitivity 1.4 Vrms
Frequency Response (at 1 watt, 20 Hz - 20 kHz) +0 dB, -1 dB
Signal-to-Noise Ratio 100 dB (A weighted)
Total Harmonic Distortion (THD) < 0.5%
Damping Factor 20 Hz to 1 kHz > 500
Crosstalk (below rated power) 20 kHz - 1 kHz: > 70 db
Input Impedance (nominal) 20k ohms balanced, 10k ohms unbalanced
Maximum Input Signal +22 dBu typical
AC Line Voltage/Frequency Configurations 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
AC Line Current 8.3A; no more than 38W at idle
Operating Temperature 0 Deg.C to 40 Deg.C at 95% relative humidity (non-condensing)
Level Two front-panel rotary level controls, one for each channel
Power Switch On/Off switch applies AC power to the amplifier
Sel/Prev/Next Buttons Three buttons near the LCD screen that are used to access menu items and front panel lockout
LCD Screen Backlit liquid crystal display that shows preset and processing status
Signal Indicator Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).
-10 Indicator Green LED flashes when output signal exceeds -10 dB below clip.
-20 Indicator Green LED flashes when output signal level exceeds -20 dB below clip.
Ready Indicator Green LED, one per channel, illuminates when the amplifier is ready to produce audio.
Clip Indicator Red LED, one per channel, turns on at the threshold of audible distortion
Temp Indicator Red LED, one per channel, illuminates under excessive temperature conditions
Power Indicator Blue LED illuminates when the amplifier has been turned on and has power
Input Connectors XLR, one per channel
Link/Out Connector Loop-thru signal from input connector for linking another amplifier, one per channel.
Output Connectors Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).
HiQnet USB Connector Type B, connects to HiQnet network.
Chassis Steel
Front Panel Cast-aluminum
Cooling Proportional speed fan with front-to-rear airflow.
Dimensions (W x H x D) 19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
Weight 18.5 lbs (8.4kg)
Adorama.com is top rated for customer service HACKER SAFE certified sites prevent over 99.9% of hacker crime. BBB Accredited Business