The Dahle CleanTEC is the World's only shredder with a fine dust filtration system. This integrated system collects fine dust particles created around the cutting cylinders and forces them into a specialized filter on the back of each machine. This Dahle CleanTEC filter permanently traps up to 98% of the fine dust and provides a cleaner, healthier work environment.
The Dahle CleanTEC 41622 shredder is equipped with the revolutionary Safe Technology Package that offers Verbal and Contact Emergency Shutdown. In the event of an emergency, simply say "stop" or tap the top cover of the machine and the shredder immediately stops. The 16" feed opening is reinforced with steel and only large enough to accept paper. As an added safeguard, this opening contains electronic sensors that will turn the shredder off, should your fingers get too close. An emergency shutoff switch is also located on the back of the machine as yet another level of personal safety.
The easy-to-use command dial controls all of the machine's functions and notifies the user when sheet capacity is exceeded, when to replace the filter and even when to change the shred bag. Equipped with ESP (Electronic Sensing Protection), the shredder "knows" how much paper you're trying to shred and won't allow sheet capacity to be exceeded.
The Dahle CleanTEC 41622 operates using the intuitive SmartPower Energy Management System. This multi-stage system reduces power consumption after 10 minutes of sitting idle (sleep mode) and completely powers down after 30 minutes of inactivity. Just like any fine tuned machine, your shredder needs to be properly oiled to run at peak performance. This shredder is equipped with the Dahle EvenFlow Lubricator. This automatic oiler provides slow, continuous lubrication across the entire cutting mechanism and ensures peak shredder performance.
|Feed Width||16" / 40.64 cm|
|Capacity||#20 / #16: 15 / 19|
|Shred Size||0.08" x 0.56" / 0.20 x 1.42 cm|
|Supported Media||Staples/Clips, Credit Cards, CDs / DVDs, Paper|
|Waste Volume||45 gal|
|Cutting Type||Cross Cut|
|Shred Speed||24.6 Ft/Min|
|Shred Container Type||Wire Frame|
|Voltage||100 - 120v (Standard)|
|Dimensions||38" x 29" x 20" / 96.52 x 73.66 x 50.8 cm|