dbx DriveRack 480M Calibrated Measurement Microphone for 4800 Loudspeaker Management System
Your card will only be charged once item ships.
Ways to Save
The dbx 480M is a measurement microphone intended for large and small room calibration. The ultra wide frequency response of 9Hz to 27kHz is flat throughout the entire spectrum and results in accurate room calibration using Smaart, MLSSA, SIMM and TEF based systems. The small element yields an omni-directional pattern resulting in a wide pick up area at the front and sides of the microphone capsule.
|Frequency Response||5Hz to 30kHz, +1/-3dB|
|Signal-to-Noise Ratio||27dB SPL equivalent (A-weighted)|
|Maximum Input Sound Level||150dB|
|Power Requirements||+48V phantom, 10mA|
|Output Impedance||600 Ohms|
|Output Connectors||XLR, intended to drive a balanced transformer less input, pin 2+|
|Low Frequency Roll-Off||No|
|Dimensions||Length: 9" (229 mm)|
|Weight||0.5 lbs (0.22 kg)|