Dymo LabelWriter 450 Twin Turbo Label Printer with 600x300dpi Resolution for Windows XP/Vista or Mac OS

2020-06-01T20:00:00

I have this printer for over 8 years and I have never had a problem with it.

Drcharlod

Originally posted at

2020-05-21T20:00:00

The recent upgrade to the Connect software has ruined hundreds of layouts that I have been using for years. Now this Connect is just not user friendly and does not even work with its own layouts. Check out the jewelry label. The text box is in the center of the label where it makes absolutely no sense. Please provide a way to get the older software.

Jergar4

Originally posted at

2020-05-11T20:00:00

I have been using the Dymo LabelWriter 450 Twin Turbo for years with very little issue. Then a new computer for me and the installation of Dymo Connect. Who did you write this for? Someone slowly organizing their home? I run a small business. I had hundreds of addresses saved in my address books that don't work in this new system. Dymo Connect has yet to even see both of my spools on the Twin Turbo. It takes me so long to do labels that I'm thinking of going back to printer them on my laser printer. Please fix this. I miss the old system and my address books.

macluan

Originally posted at

2020-04-25T20:00:00

I bought this particular product because it was advertised as being able to use a free stamp software with Endicia, but apparently that ended years ago. Not only is it not free but because I am a mac user I am forced to purchase the most expensive package in order to print stamps. In addition I contacted both Dymo and Endicia in regards to this and the false advertising and cannot get a response from them. I would NOT recommend getting any Dymo product.

alex123

Originally posted at

2020-04-06T20:00:00

I have been using this printer and its software for years. With each iteration a new problem appears. I am used to the disappearing printer and having to reboot my computer or plug/unplug the Dymolabel. Now, however, with the most recent Mac upgrade I lost all of my prior templates, and none of the new ones seem to allow printing mailing barcodes. I can't stand the changes and wish I could downgrade to a previous release.

pauliep308

Originally posted at

2020-03-18T20:00:00

I cannot download driver for windows 10. Been on here almost 1 hour downloading one driver after the other and can not get it to work. What is wrong with this everyone is complaining about the same thing. I have it on another computer and it works but not both of the printers only one does. Need this fixed asap.

Rodriguez

Originally posted at

2020-03-10T20:00:00

There is NOTHING easy about this device. Windows 10 does not recognize the two printers; there is no user guide; the website has no assistance. Do not buy this product. Packaging up and returning.

jtm829

Originally posted at

2020-02-11T19:00:00

Label printing is good, but when installing the software, windows 10 only recognizes 1 printer, not 2 as indicated in the documentation. Since I do not use Dymo connect to print labels, I have to go thru printer preferences, adding multiple steps for something that should be as simple as changing printers.

Timb

Originally posted at

2020-01-11T19:00:00

This is ridiculous that it does not come with a CD and a user manual. So far, the website sucks. I download three users guides all for Belgium. I have spent 30 minutes on the website and still waiting for DC setup.exe to download. In the meantime, looking for an English user guide to set up the labels correctly. I am ready to return this and forget about it.

Trixie

Originally posted at

2019-12-03T19:00:00

I have using Turbo 450. Was working with Catalina. Purchased Twin Turbo and now I'm in trouble. I tried to install the Twin Turbo on the same Mac as the 450, but the printer wouldn't show up in the printer list. I tried to update software, but Apple would not permit it because it couldn't be checked for "malicious content." I thought I might need to uninstall the old software and use the new software, but the was really dumb and a HUGE MISTAKE. Now I have no software that works. DYMO need to update the software for Catalina 64-bit. Don't purchase DYMO until they do.

sburnet53

Originally posted at

2019-11-11T19:00:00

I have contacted Dymo twice with no response about a replacement adapter. We pretty much have a dymo on every desk at my job and I can't even get one adapter. It's not even an option to just purchase one on the website. It shouldn't be this difficult!

Sammi

Originally posted at

2019-10-25T20:00:00

Product works well when it works. Software is terrible. Often the machine loses connection with the PC. You have discreet the USB cable, power off and reboot it. Almost unusable. Release packaged as 8.7.3 in fact is not. It is 8.7.0. It is not 32 bit.

Very E.

Originally posted at

2019-10-20T20:00:00

I'm echoing Tom from PA's comments below. I've used this printer successfully for about a decade along with the easy-to-use stamp printer, which was a major reason for its purchase. Now with the change to the stamp policy I'm stuck with a partially-used roll of stamps, the need to go to a web page to print stamps instead of a Windows application, and a $18/month fee for the privilege of using that service. This is infeasible for me as a small business with few monthly mailings - none of which was clear in the NetStamps application. Unless you're a large volume mailer this product is no longer usable for stamp printing. It's deeply disappointing that Dymo is making this happen. It's OK for other label printing but don't buy it to print stamps. I'll need to find another way to print the stamps that I need for my business.

Jon P.

Originally posted at

2019-09-16T20:00:00

I've owned the Dymo Twin Turbo for about 15 years...not sure of the exact date. It printed stamps in conjunction with a third party (Endicia and great-looking shipping labels. It always worked beautifully. Last year Dymo and Endicia parted company and I could no longer print stamps. No work-arounds and no help from Dymo. ("We're working on it...we'll get back to you" That never happened.) Now, a new computer and I can't print labels as the new confusing software will not recognize the printer. Dymo had a good product. Now I'm out a lot of money for a roll of stamps that can't be used and a printer that is not recognized by Dymo.

Tom P.

Originally posted at

2019-09-11T20:00:00

We bought this to replace the previous LabelWriter Twin Turbo, which we had for about 11 years. The 450 Twin Turbo prints address labels about twice as fast as the previous model. Stamps print at about the same speed as previous model.

ValS

Originally posted at

2019-08-07T20:00:00

I had been using a Labelwriter Twin Turbo printer with the Dymo Label Software 8.7.3 and recently purchased a 450 Twin Turbo and installed the new Dymo Connect software (v 1.1). I use lots of software and this is probably one of the worst I have ever encountered. Where to start. Ok, the UI is counter-intuitive and needlessly overcomplicated and convoluted; On the bottom left of the screen is an indication of which side of the printer is in use, which can be changed by clicking on an up-arrow and changing the side. On the bottom right is an indication of a label, which, unfortunately does not change when you change printer sides, so this control is useless (it only indicates which label was last printed); You need to go to the top and click "New" to choose the printer side and the correct label and start the whole label creation process all over; When you type an address on a label, even though Auto Fit is enabled, type will not auto fit on the label. Instead, it is entered into a small text box which prints tiny text on the label. In order to enlarge the text, you need to drag the boundaries of the box to the edges of the label; Most of the time the Address Fixer either does not work or gives crazy results; There is no way to add an Intelligent Mail Barcode to an address. These are but a few examples and I could go on, and on, but IMO, this software feels like an early Beta and I am uninstalling it and going back to Dymo Label Software 8.7.3.

SteveS

Originally posted at

2019-07-06T20:00:00

doesn't work, won't print , installed software won;t print labels

stupid b.

Originally posted at

2019-06-19T20:00:00

I have been using LabelWriter 450 Twin Turbo for a couple of weeks now, daily at my job. It does exactly what we needed to and more. There are a few things I would personally update on the software, however I am thoroughly pleased with the functions it performs.

ShellOffAdmin

Originally posted at

2019-06-06T20:00:00

I bout the 450 Twin specifically for my home business and loved using it for shipping products through USPS and UPS. Then after a recent update I can no longer print Priority Class labels unless I pay extra through third party apps. So unfortunate that a great product is being hindered by such a small matter.

Tyger

Originally posted at

2019-05-27T20:00:00

All of a sudden our twin turbo stopped working on our window 7 pc's about 2 weeks ago. We uninstalled then renstalled the software but continued to receive the same error message, "out of memory". The message would just repeat, clogging up the screen. We intalled the printer on a windows 10 pc and so far seems to be running ok.

accc

Originally posted at

2019-04-21T20:00:00

I am unable to print postage #30915 Stamps. I have several rolls and have had an account with Endicia for years>

cyyoung44

Originally posted at

2019-04-14T20:00:00

Windows recognizes Dymo Printer...Dymo printer software does not. Makes printer useless. User experience during set-up installation is terrible. If this is the user experience for Dymo, I can see why Newell Brands is being flushed down the toilet right now.

Dawg0074

Originally posted at

2018-12-03T19:00:00

Works fine until it's time to change the labels.It wastes half of the roll before it works again.

kelly95

Originally posted at

2018-08-01T20:00:00

When it works, it's great. However it will randomly stop printing after about a week of use and my computer will no longer recognize the USB. I can be printing several different labels right after each other, click "print" on the next one and poof the USB isn't recognized. Literally only about 3 seconds have passed since I printed the previous label but now it won't work. The only way to fix it is to unplug everything and wait 30 seconds then plug it all back in. Then suddenly it magically wants to work again. It's very annoying and has caused me to not want this brand anymore. I have changed cords and changed USB ports on my computer. Nothing changed, so it has to be the label maker itself. I would say if you are buying a label maker for consistent use look elsewhere.

em0826

Originally posted at

2018-06-21T20:00:00

I have been using this label writer for almost 7 years now with no issues. Software updates are easy and quick. The only thing I have had to buy in the past 7 years is the label tape. This is used in an office setting too with almost daily use. Cannot recommend this enough!

jjg86

Originally posted at

2018-06-07T20:00:00

I bought this model, prints perfect with windows (no problem). But can not run on my professional android tablet (stanley s331). Find only Windows and Mac drivers...so sad

blw95

Originally posted at

2018-04-17T20:00:00

It has been good for printing one type of label, but we can't seem to get two different types of labels to work.

DDefense

Originally posted at

2017-10-09T20:00:00

I've been using Dymo LabelWriters in my business for many years now. We've just bought our 20th, a 450 TwinTurbo.

Navion A.

Originally posted at

2017-10-06T20:00:00

Not sure what happened but we bought this unit to replace an older one same model etc. and after a week of using it stopped spooling

Helpdesk

Originally posted at

2016-10-22T20:00:00

Once I BEGAN to learn to properly use the labelwriter software, printing began to be a breeze. As a typical tech (or former tech), I rush ahead without bothering to read instructions. But, then, instructions are often not written to reach every member of an audience! Anyway, I love the "intelligent address box" AND the address fixer! However, I WOULD pay more for a Dymo printer if it had the ability to recognize the FORMS installed. Would that be difficult? By "more" I mean up to double.

PaulH28

Originally posted at