The Furman Sound Merit Series M-8X2 Power Conditioner is a AC power solution for rack mount systems. Install an M-8x in the top slot of your rack and the eight switched AC outlets in the rear panel will power up and protect all your equipment, up to a 15A load. M-Series conditioners protect your delicate electronic equipment by combining high voltage varistor (MOV) surge and transient suppressors.
The fast-acting suppression circuit quickly responds and clamps transient voltages to safe levels. An RFI/EMI interference filter works to prevent noise from fluorescent lights, certain dimmers, radio transmitters and similar sources of "electronic pollution" from contaminating the AC line and from there leaking into sensitive audio, video, or computer circuits.
|Maximum Output Current||15 amps|
|Line Cord||6 ft., captive, 14 AWG, with 3-conductor Edison plug|
|Operating Voltage||120VAC 60Hz|
|Spike Protection Mode||Line to neutral|
|Energy Dissipation||170 joules|
|Peak Impulse Current||12,000 amps|
|Maximum Continuous Operating Voltage||130 VAC RMS|
|Let Through Voltage||400 volts (@ 125 amps, 8/20uS waveform)|
|Noise Attenuation||Transverse mode: Greater than 23dB, 200Khz to 10 Mhz|
|Dimensions (H x W x D)||1.75 x 19 x 3.75" (4.4 x 48.2 x 9.5 cm)|
|Weight||4.9 lbs. (2.2 kg)|