Adorama T-Mount Adapter for Canon EOS

2013-08-26T21:00:00

I had trouble finding this adapter to put my 500 MM lens on my canon T4i. I searched and finally went to Adorama. I clicked on chat and a very nice lady linked me to this adapter. Ordered it and it worked great. Thanks to Adorama's helpful personel and the adapter, I am now enjoying my 500 mirror lens.

JOHN S.

2013-08-19T21:00:00

Works fine, solid fit to lens and camera

ROZALIA C.

2013-07-29T21:00:00

It fits my Canon T2i and it fits my Bushnell scope adapter so that I can digiscope. Works just fine, threads are easy to get started.

Ken H.

2013-05-13T21:00:00

Works well with my Canon EOS 3i.

Tom

2013-04-22T21:00:00

If you are looking for a good, basic, low-cost t-ring, this is it. However, for serious astrophotography, be aware that better, but more expensive, alternatives exist. These alternatives offer more easily adjustable, yet rigid, connections to your scope.

Star-seeker

2013-03-25T21:00:00

I use the adapter to attach my DSLR to my spotting scope. It's a good product for a great price.

cclark

2013-03-25T21:00:00

Will be using this in the woods to capture wildlife.

RONALD B.

2013-03-16T21:00:00

I use the EOS T-mount on my Vivitar 800mm lens. Works great! Very pleased. I have had it for several years and it has never given me any problems.

Wesley

2013-01-16T19:00:00

Works great !

Garry S.

2012-12-12T19:00:00

Allows me to adapt my camera to a variety of telescopes.

JAMES L.

2012-12-12T19:00:00

I bought this adapter to mount a manual focus lens to my Canon 5D. It works well and provides a strong connection.

Rich

2012-09-02T21:00:00

Use this for astrophotography...good product...works fine.

Mike

2012-06-17T21:00:00

Excellent build quality. Adapted well to my Meade ETX-90 telescope and Canon 7D for shooting the recent 2012 Venus transit of the Sun. Nice tight fit to the mount.

ROBERT W.

2012-05-06T21:00:00

Astronomy photos for use with telescopes in a digital eos cameras

Viktor

2012-04-22T21:00:00

I bought this itme to use the Bower T-Mount 500mm f/8.0 Preset Telephoto Lens, and I was able to use the lens on my Canon 60D. It install fine and is easy to use.

amateur p.

2012-04-15T21:00:00

I needed this T-mount for a 420-800mm lens. Its tough, simple, and does its job. The price was nice, too.

Jaan

2012-02-12T19:00:00

Its not made of plastic but metal possible aluminum. It fits well to my Canon DSLR.

Stargazer

2011-09-03T21:00:00

Have used up to about 30x magnification so far.

PAUL G.

2010-01-09T19:00:00

This is a standard piece f kit that is very simple to use and functional. I used it to connect my digital slr (Canon) to my telescope. It's totally intuitive and impossible to break unless you mistreat it, or are involved in a terrible head-on collision, perish the thought..

Davehut

2010-01-09T19:00:00

Well made, fits perfect my camera, nothing that must be improved.

Astro

2009-10-21T21:00:00

It broke within two hours of use with 500 mm lens. I'm guessing the lens, although light, was too heavy for it. [...]the T-mount was disappointing. I like the test shots I did with the lens, given that it is a CDT lens system, and was willing to give everything a second chance. [...] I have a T-mount for an astro telescope that is heavier duty, and such should be similar for the one supplied with the 500 mm lens. Oh well.

rbnewsnapa

2009-03-29T21:00:00

This mount works well once you are able to attach it to the body and that can be difficult until you get the hang of it then its okay.

skydancer

2009-03-29T21:00:00

Fit my telescope and microscope, was a bit supprised at first but i did not need any reduction rings. This is a first for me and was easy to attach.

Dr D.

2009-02-18T19:00:00

I received this product in a Celestron box with part number #93419. It is exactly shown as Celestron has it on its site (Made in Taiwan). The mount works fine and locks onto my 20D. It is cleanly made and not rough at the edges. There's just an inkling of a slight wobble compared to Canon-made lenses. The typical red thread indicator is a silver dot and about 2mm off. I have to admit that I am a bit disappointed with this as Adorama's product image shows a Japan-made lens adapter. They should change the image and product name to better reflect the product being sold. It works, but I feel a bit jilted thinking that the one made in Japan could possibly have tighter tolerances.

MXWPhoto

2009-02-05T19:00:00

A BAD product. I am disiponited to no end. The picture on [...] showed it was made in Japan. It was not. It was made in Tawani. Could not get it to work on my camera until I made the hole for the cameras locking pin larger.You can read my comment I wrote on [...] page. I guess buyer be ware!!!

cracker

2009-01-27T19:00:00

Bought to attach DSLR to Meade ETX. Nice fit, finish. Good results.

DARIN M.

2009-01-20T19:00:00

I use this for wildlife and astro photography using my Rebel XSi and a 4" mak. Works perfectly, threads feel strong, and it is nice and light.

Jcely

2008-12-29T19:00:00

used this to make a custom mount for a slit lamp, as well as a custom mount for an xray lens, worked great, made of metal so it won't snap easily

Yogi

2008-08-26T21:00:00

The T - Mount is light easy to use and allows me to use lenses that I could use befor.

Big J.

2008-05-21T21:00:00

I bought to attach to a Meade ETX telescope. It fits my eos camera and the scope perfectly, and the finish was very good. no sharp burrs as I have seen on some other lesser quality adapters.

DANIEL S.