Developed specifically for use with the HD DC-Slider, you'll enjoy endless possibilities of camera movement and control. Motion control allows manual and programmed movements. Every movement, manual or programmed may be stored for later use. There are nine persistent banks and one volatile bank available. Eachmovement can be repeated up to 999 times and extended "time extension" up to 99 times, allowing the user more than enough opportunity to get that perfect shot. When using Canon and Nikon DSLR's and the accessory camera control cable, it is possible to control the shutter speed and exposure from the remote control whichcontains a built-in intervalometer. You'll really appreciate the wide range of speed settings from 0-20cm/sec and a speed ramp range from .5-2.5 seconds. Due to the patent pending, precision counter balance system on the DC Slider family,only one motor is required for all functions of motion control. The Motion Control System allows the use of the multi-angled slider to achieve a wide rangeof unique shots. Designed and manufactured by FloatCam. Lemo cables not coveredunder warranty.
Time Lapse and Stop Motion Modules
Time Lapse Continuous mode allows for continuous movement across the slider during the time lapse process. In this mode it is is possible to set the total movement time, number of shots and control the shutter and exposure of a DSLR camera. It is also possible to trigger multiple image sequences from the Motion Control. This can be useful for high dynamic range imaging, exposure-bracketed time lapse or multiple constant-exposure shotsfor noise reduction in the post production process. The time lapse continuous setting also gives you the option to read a saved track from the memory, or manually set the start and stop position desired.