The 68-D1000-3FCW offers 1000 watt-seconds of power with Novatrons FULLY digital powerpack. The included D1000 power pack is fully microprocessor controlled and has an output which is variable in 1/10'th stop increments over a full 4 f-stop power range.
Output power is displayed on a 1/2 inch tall 4 digit LED display which is easily visible from many feet away in normal room light. The D1000 power pack also provides misfire alarm functions and supports all standard Novatron flashheads.
What sets the FC kits apart is that all three of the included flash heads are Novatrons top of the line model 2103-FC Convertible Heads. These fan-cooled heads have a built-in adapter ring that will accept either the #2034 (16 inch) or #2032 (6-1/2 inch) reflectors AND a large number of soft boxes and other light modifiers from many manufacturers.
Novatrons largest heavy duty case is included, equipped with casters and pull handle.
The D1000 is the first in a new generation of rugged and sophisticated all digital flash power packs from Novatron. The 1000 watt-seconds fan cooled pack, is fully microprocessor controlled and has an output which is variable in 1/10'th stop increments over its' entire 4 stop power range (double the range of our previous 1000 watt-sec units).
Output power is displayed on a 1/2 inch tall 4 digit LED display which is easily visible from many feet away under normal room lights. The D1000 power pack also provides misfire alarm functions and supports all standard Novatron flashheads. It is also sync voltage compatible with most current digital cameras on the market and has higher powered modeling lamp support.
These packs also have a second circuit breaker dedicated to the modeling lamps and are designated as Series II. This second breaker allows these units to handle up to 250 watt modeling lamps for fan-cooled flash heads (1000 watts total modeling lamp power per unit).
The 2103-FC is a 3-way switching convertible flashhead that contains the controls to independently ratio the flash and modeling lamp at full, -1 stop, or -2 stops. It comes equipped with an internal fan, which aids in cooling the electronics and the user replaceable F0008 plug-in flash tube.
Fan cooling extends the power handling capacity of this head to 1500 watt-seconds. It comes equipped with a glass encapsulated 250-watt quartz halogen modeling lamp, a 25-foot power cord, and a flash tube protector sleeve. This convertible flashhead accepts the optional 6-1/2" #2032 and 16" #2034 detachable reflectors and is ideal for use in softboxes.
Please note: At least one head on the pack needs to be at full power to prevent damage that is not covered under warranty. It is suggested that you always use the 2102-FC to prevent possible errors.