
Orders placed during Passover Holiday (Wed 4/1 after 4PM ET – Thurs 4/9) will ship Fri 4/10. View our holiday shipping schedule.
This item is no longer available.
Review Summary
SandForce Processor with full SF1200 Series 7% Over Provisioning firmware set.
Standard
120GB
Sustained Sequential Read: up to 285MB/s
Sustained Sequential Write: up to 275MB/s
Random 4KB: Up to 50,000 IOPS
Less than 0.1ms
Less than 0.1ms
2,000,000 hours Mean Time To Failure (MTTF) (based on SandForce processor operation)
SATA I (1.5Gb/s) and SATA II (3.0Gb/s) supported, SATA 2.6 Compliant
Native Command Queuing up to 32 commands
SMART Command Transport
Advanced TRIM Support in Windows 7
0Deg.C to +70Deg.C
-55Deg.C to +150Deg.C
Active: 2200mW (2.2W) Typical, up to 2500mW (2.5W)
Inactive (DIPM): 90mW (.09W) Typical
ECC Recovery: Up to 24 bytes correctable per 512-byte sector
Unrecoverable Read Errors: Less than 1 sector per 1016 bits read
Chip Based Data Encryption: 128-bit AES-compliant
Yes
2.5" Industry Standard Hard Drive Form Factor
100.12 x 70.06 x 9.45mm/ 3.94 x 2.75 x 0.37"
80 g/ 0.17 lbs
736211765154
The OWC / OWC / Other World Computing 120GB Mercury Extreme Pro 3G Solid State Drive uses a high performance SandForce Driven processor with DuraClass technology to deliver the highest transfer speed, endurance, performance and power efficiency available today. With sustained read and write times over 260MB/s, up to 100x greater data protection than enterprise class HD's and RAISE technology for RAID like data protection and reliability.