Rode Microphones VideoMic with Rycote Lyre Suspension System
What's Included With This Item:
- Rode Microphones VideoMic
- Rycote Suspension System
- Rode Microphones Warranty
The Rode Microphones VideoMic with Rycote Lyre Suspension System is a shotgun microphone that can easily be mounted on a DSLR camera. It features a Rycote suspension system that attaches to the camera's shoe. The VideoMic is lightweight and when mounting on a camera it does not appear in the frame. The VideoMic can also mount to Rode's boompoles for elevated audio capture. Its super-cardioid polar pattern attenuates sounds from the sides. The result is a signal that sounds closer to the camera, even when shooting in noisy environments or at moderate distances.
The included Rycote Lyre is a non-elasticized suspension structure composed of a hard-wearing thermoplastic. It is more effective at acoustically decoupling microphones from unwanted vibrations, handling and cable-borne noise than elasticized suspensions. The lyre remains effective at a wide range of temperatures and is virtually indestructible. It will never wear out, sag, snap or require any rethreading to maintain its effectiveness.
An attached, coiled cable terminates to a 1/8" (3.5mm) mini output connection. The VideoMic features a condenser element that utilizes a standard 9 Volt batteries (sold separately). The microphone will run for approximately 100 hours on a single battery.
|Frequency Response||40 Hz to 20 kHz|
|High-Pass Filter||at 80 Hz, 12 dB/octave, selectable|
|Dynamic Range (Typical)||114 dB (per IEC651, IEC268-15)|
|Signal-to-Noise Ratio||74 dB (1 kHz at 1 Pa; per IEC651, IEC268-15)|
|Maximum Input Sound Level||134 dB (at 1% THD into 1kohm)|
|Power Requirements||9V battery|
|Output Connectors||1/8" (3.5 mm) stereo mini plug, male|
|Pad||-10 and -20 dB|
|Dimensions (Øÿ x H x L)||2.55x4.02x8.84" / 65x102x250mm|
|Weight||6.21oz / 176g|