Shure VP89L Long Shotgun Microphone with Case & Foam Windscreen, 60-20,000 Hz Frequency Response, 115.0 Ohms Output Impedance

Shure

About Shure VP89L

The Shure VP89L Long Shotgun Microphone features an interchangeable capsule that displays high RF (Radio Frequency) rejection, superior side noise rejection and is paired with the detachable VP89L Preamp. Long sized capsule barrel is available to suite various recording needs, rejection angles and frequency response types.

The Shure VP89L includes a windscreen and carrying case. The state-of-the-art low noise preamplifier design features a low frequency roll-off switch for eliminating noise below 200Hz. The usefulness of the microphone can be further extended by buying one of the other length capsule and simply attaching it to the already included preamp.

Shure VP89L Features

  • State-of-the-art preamplifier redesign
  • Superior RF immunity
  • Internal low-frequency roll-off
  • Recessed low-cut filter switch for additional control
  • Smaller footprint
  • Superior Shure design and rugged, roadworthy construction
  • For targeting sound sources over long distances (sporting events, ENG, wildlife, field recording)
  • Extremely narrow pickup angle
  • Unmatched quality of off-axis rejection

Shure VP89L Specifications

Cartridge Type
Electret Condenser
Polar Pattern
Hypercardioid / Lobar
Frequency Response
60-20,000 Hz
Output Impedance
115.0 Ohms
Sensitivity
-33.5 dBV/Pa (2.11 mV)
Maximum SPL
2500 Ohms load: 132.0 dB SPL
1000 Ohms load: 128.5 dB SPL
Signal-to-Noise Ratio
79.0 dB
Dynamic Range (@ 1 kHz)
2500 Ohms load: 117.0 dB
1000 Ohms load: 113.5 dB
Clipping Level (@ 1 kHz, 1% THD)
2500 Ohms load: 4.0 dBV
1000 Ohms load: 0.0 dBV
Self Noise
15.0 dB
Common Mode Rejection
20-20,000 Hz = 70.0 dB
Low-Frequency Filter Switch
-12 dB / oct below specified frequency
Flat Response
100 Hz
Low Frequency Roll-off
200 Hz
Operating Temperature Range
-18deg.C (0deg.F) to 57deg.C (135deg.F)
Storage Temperature Range
-29deg.C (-20deg.F) to 74deg.C (165deg.F)
Operating Relative Humidity
0 to 95%
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Housing
Charcoal-grey metallic painted aluminum alloy handle and grille with stainless steel screen
Power Requirements
11-52 V DC phantom power (IEC-61938), <2.0 mA
Barrel Length
386 mm (15.19 in)
Weight
174 g (6.1 oz.)
top
Share this item:
Adorama.com is top rated for customer serviceHACKER SAFE certified sites prevent over 99.9% of hacker crime.