 |
Ideal for creating superior high-quality stereo recordings |
|
Offers solid-state storage - free of drive mechanisms |
|
Built-in X-Y electret condenser microphones |
|
The PCM-D1's electret condenser microphones have extraordinary high sensitivity and low noise characteristics. All microphone casing parts are cut from metal and fit together nearly seamlessly |
|
Superior Audio Signal Path: The microphone amplifier provided for each channel is the Analog Devices AD797, which boasts ultra-low noise and distortion. A variable gain circuit is adopted for amplitude control, thus improviing the actual signal to noise ratio |
|
Outstanding Build Quality: The circuitry of the PCM-D1 is protected by a body made of 1 mm thick pure titanium. By means of a pressing process called "drawing", titanium is shaped into a box to achieve a body rigidity that cannot be obtained through bending or using pressed aluminum |
|
Simple Uploading to Computer: The PCM-D1 conforms to the USB 2.0 Mass Storage Device standard and this recorder's native recording file format is .WAV. This means recordings can be rapidly uploaded to a computer and used in conjunction with most common audio production software |
|
High Quality Signal Processing: The PCM-D1 offers comprehensive signal processing features for location recording including a unique limiter function, a 200 Hz high pass filter and SBM (Super Bit Mapping) noise shaping |
| Microphone Input | (Stereo Mini Jack) Input impedance: 22 k ohm, Rated input level: 2.5 mV; Minimum input level: 0.7 mV |
| S/N Ratio | 96 dB or greater (1 kHz IHF-A) when set to 24-bit |
| Built-in Mic | Electret condenser microphones. Input level 130 dB SP; Frequency response 50 Hz - 30 kHz |
| Frequency Response | For Fs = 22.05 kHz: Frequency Response = 20 Hz to 10 kHz |
| Outputs | For Line Output Use = Output impedance: 220 ohms |
| Quantization | 16-bit linear, 24-bit linear |
| Sampling Frequency | 22.05 kHz, 44.1 kHz, 48 kHz and 96 kHz |
| Wow and Flutter | Below measurable limit (less than +/-0.001% W.Peak) |
| Headphone Output | Stereo Mini Jack Rated output: 400 mV; Maximum output: 30 mW + 30 mW or more; Load impedance: 16 ? |
| DC Input Jack | 6V |
| Memory Stick Slot | Built-in flash memory 4 GB, Stereo Recording |
| USB | Hi-speed USB, Mass Storage Class |
| Line Input (OPT) | Input impedance: 47 K ohms; Rated input level: 2.0V; Minimum input level: 570 mV |
| Line Out/Optical Digital Output | Optical: Output imped: 220 ohms, Load imped: 22 k ohm. Digital = Output level: -21dBm to -15 dBm |
| Sampling Rates | 22.05 kHz, 44.1 kHz, 48 kHz and 96 kHz |
| Total Harmonic Distortion | 0.008% or below (1 kHz, 22 kHz LPF) |
| Power Requirements | DC IN 6V (AC 120V, 60Hz); Four AA size nickel metal hydride rechargeable batteries NH-AA (supplied); or Four AA size alkaline batteries (not supplied) |
| Power Consumption | 2.1W |
| Dimensions | 2-7/8" x 6-3/4" x 1-5/16" (w x h x d) not including projecting parts and controls |
| Weight | 18.52 oz (including batteries) |
| Warranty | Sony warranty |
| | |
Add to Wishlist
Email this Page
Print
