Cineo TruColor LS Luminaire Kit, 5600K Temperature
What's Included With This Item:
- Cineo LS Lamphead
- 5600K RP Panel
- 10' Lamphead Cable
- Cineo AC150 PSU
- Cineo Warranty
The Cineo TruColor LS (5600K) delivers an unprecedented volume of soft light optimized for image capture, as well as other applications that demand accurate color rendering. It exceeds the output of a traditional 1K incandescent soft light using less than 150 watts of AC power. Up to 10 units can be powered from a single 15 amp circuit avoiding the added cost of generators, fuel and heavy cables. Operating temperatures are also significantly reduced, producing virtually no heat in the illuminated area.
The light actually emits from the RPT panel on the front of the fixture, providing a lighting characteristic that radiates equally in a 160deg. radius. The ability for TruColor LS to "wrap" your subject with soft, edgeless shadows is unlike any fixture you've ever used.
A leading innovator of phosphor technology to develop special high-CRI formulations that deliver 3200K with a CRI of 98. When daylight is required, the interchangeable phosphor panels allow the same fixture to output 5600K with a CRI of 94. Additional color temperatures are available to match other light conditions, including panels optimized for chroma key. The color temperature of the TruColor LS consistently matches all other fixtures in the TruColor line and will not change over time like other lighting technologies.
The TruColor LS has several powering options, including a single AC power supply, 3-gang AC operation with the DX450 power supply (local, DMX control) and DC power options in the near future. The TruColor LS is flicker-free and silent, perfect for any film or television project in the studio or on location. Like all Cineo Lighting products, the TruColor LS is extremely durable, built to last with anodized alloy construction, tough polycarbonate panels and field serviceable components.
|Input voltage||100-240 VAC 50/60 Hz.|
|Power consumption||167 watts, max.|
|Head to power supply cable||10', 30', 100' 35,000 hr. L70 rated|
|Environmental temperature range||-20deg. - +50deg. C|
|Compliant||ETL and cETL Listed, CE|
|Max. temperature rise||+45deg. C|
|Dimensions (HxWxD)||Lamp head (with yoke): 9.5x11.03x3.95" / 241.3x280.16x100.33mm
Power Supply: 2.5x3.7x14.5" / 63.5x93.98x368.3mm
|Weight||Lamp Head: 4.9 lbs / 2.22 kg
Power Supply: 4.7 lbs / 2.14 kg