Ubertronix Strike Finder Elite with RS60E3 Cable for Canon Cameras (Lightning, Laser, Sound, Motion)
What's Included With This Item:
- Ubertronix Strike Finder Elite
- 9V Battery
- Ubertronix Warranty
The Ubertronix Strike Finder Elite is the only 4-in-1 camera trigger (Laser, Lightning, Sound and Motion) in the world that receives so many inputs to respond and release your camera's shutter.
The Strike Finder Elite is the only trigger that comes with four extraordinary inputs that allow you to photograph things that would otherwise be impossible with the human eye. It comes with a laser trigger sensor, lightning trigger (or other high flash event), a sound trigger and motion trigger. These sensors were selected based on feedback by other photographers looking for this capability. All you need is a DSLR camera and you're ready to go.
The Lightning was designed to capture lightning strikes either day or night. It uses microcontroller-based technology along with an infrared sensor to capture the most stunning photographs with complete ease. The device mounts onto the camera hotshoe, so you can walk away and let it do all of the hard work.
The Laser Trigger was designed to capture anything that breaks the beam from water droplets to people walking through it. Once the laser has been tripped, the device instantly sends a signal to the camera telling it to release the shutter. The shutter releases about 45-60 ms later, depending on the camera.
The Sound Trigger allows you to do high speed photography. The sound trigger attachment plugs into the side of the Strike Finder with an 18" cable. When it senses a loud signal, the device sends a signal to your camera to release the shutter.
The Motion Trigger attachment works by detecting motion. When moment motion is detected, the device will trigger your camera every time. The motion sensor comes as an attachment that plugs into the side of the Strike Finder Elite with an 18" cable. The sound trigger attachment plugs into the side of the Strike Finder. When it senses a loud signal, the device sends a signal to your camera to release the shutter.
|Compatibility||Canon 300D, 350D, 400D, 450D, 500D, Rebel 2000, Rebel G, Rebel T2, Rebel Ti, Rebel X, Rebel XS Digital, Rebel XT Digital Cameras, PENTAX K20D/K200D/K10D/K100D and Samsung GX-20/GX-10|
|Dimensions (L x W x H)||4.4" x 2.6" x 0.83 / 111.76 x 66.04 x 21.082 mm|