 |
Ultra-low noise, highest headroom in its class |
|
16 new precision-engineered XDR(tm) Extended Dynamic Range premium studio-grade mic preamps with: |
|
Ultra-wide 0-60dB gain range |
|
130dB dynamic range for 24-bit, 192kHz sampling rate inputs |
|
+22dBu line input handling |
|
Distortion under 0.0007% (20Hz-20kHz) |
|
Advanced DC pulse transformer RF rejection |
|
4 subgroups with left & right assigns and direct outs |
|
16 line inputs, 16 channel inserts |
|
60mm long-wearing logarithmic-taper faders |
|
Constant-loudness pan controls |
|
Switchable AFL/PFL Solo |
|
6 aux sends per ch. with 15dB gain above Unity |
|
Aux 1 & 2 pre/post |
|
Aux Send 1-2 Master section with level controls, Solo switches and Solo LEDs |
|
Level, pan; -20, Solo & OL LEDs on each channel |
|
RUDE solo light doubles as a mini-tanning booth |
|
4 stereo aux returns, 8 direct outs |
|
3-band active EQ with sweepable midrange |
|
18dB/oct. 75Hz Lo Cut filter on each channel |
|
Control Room/Phones outputs with multi-input source matrix |
|
RCA tape inputs & outputs |
|
Tape input level control and Tape To Main Mix switch |
|
Balanced 1/4" inputs & outputs (except inserts) |
|
Switchable phantom power for condenser mics |
|
5 physical configurations via optional rotating I/O pod |
|
Rugged steel main chassis, sealed rotary controls |
|
Built-in power supply, rack mount kit included |
| Equivalent Input Noise (20Hz-20kHz) | 150 ohm -129.5 dBu
50 ohm -131.0 dBu
0 ohm -134.5 dBu |
| Frequency Response | -1dB 5Hz to 100kHz
-3dB 3Hz to 192kHz |
| IM Distortion (4 to 1 ratio SMPTE) | 35dB gain 0.0008% |
| Harmonic Distortion (20Hz-20kHz) | 35dB gain 0.0007% |
| Gain | Max +60dB
Min 0dB or Unity |
| Max Input | +22dB |
| Input Impedance | 1.3k Ohm |
| Common Mode Rejection | > 90dB |
| Common Mode Rejection Ratio | > 140dB |
| Main Mix Noise | 20Hz-20kHz bandwidth, 1/4" Main out, Channel Trim at unity gain, channel EQs flat, all channels assigned to Main Mix, odd channels Pan left, even channels Pan right, Reference +4dBu |
| Main Mix | Fader at unity, channel faders down: -90dBu |
| Main Mix | Fader at unity, channel faders at unity: -88.5dBu |
| Total Harmonic Distortion (THD) | 1kHz at +14dBu, 20Hz-20kHz. |
| Attenuation (Crosstalk) | 1kHz relative to 0dBu, 20Hz-20kHz bandwidth, Line in, 1/4" Main Out, Trim at unity
Channel Mute switch engaged: -84dBu
Channel Fader down: -84dBu |
| Frequency Response | Any input to any output +0dB/-1dB 20Hz to 60kHz
+0dB/-3dB 20Hz to 100kHz |
| Maximum Levels | All other inputs: +22dBu
Main Mix XLR out: +28dBu
All other outputs: +22dBu |
| Impedances | Channel Insert return: 2.5 kilohms
All other inputs: 10 kilohms or greater
Tape out: 1.1 kilohms
All other outputs: 120 ohms |
| EQ | High Shelving ±15db at 12kHz
Mid Peaking ±15dB, Sweep
100Hz -8kHz
Low Shelving ±15db at 80Hz
Low Cut Filter: 18dB/Octave, -3dB at 75Hz |
| Power Consumption | 120VAC, 50/60Hz, 50 watts
Fuse Ratings : 120V 1A Slo Blo, 5 x 20mm
220-240V 0.5A Slo Blo, 5 x 20mm |
| Weight | 20 lbs (9.1 kg) |
| | |
Add to Wishlist
Email this Page
Print
