The Zacuto Recoil V2 For Canon C100/C300/C500 is a shoulder rig designed specifically for use with the Canon C100, C300, and C500 cameras. It features a studio style baseplate, a QR shoulder pad, and Zacuto's ENG Grip Relocator. This system allows you to quickly and easily move from shoulder rig configuration to tripod-mounted camera and back again. The studio style baseplate includes 15mm support rods and is designed to provide the proper rod to lens height for matte boxes and lens accessories when used with the C100/C300/C500. It also incorporates four additional 15mm rod clamps in two pairs 60mm apart, one pair on each side. These clamps are loosened and tightened with an Allen key. This allows you to attach available 15mm rods and rod mounted accessories, such as the Zacuto Zwiss V2 plate to the side of the baseplate.
The ENG style grip relocator mounts to the 15mm rods, and the hand grip for the C100/C300/C500 cameras attaches to the relocator so you can place the camera's handgrip in a comfortable position when shooting with the baseplate. The relocator interfaces with the handgrip, and a 24" long cable connects it to the camera, preserving the camera control functions of the handgrip. The shoulder pad features a curved design, and the Viscoelastic cushion protects your shoulder from the weight of the camera. It also features a QR design that allows you to easily slide the camera forward and back on the shoulder pad to get the balance how you like it. Zacuto recommends an available EVF or external monitor be used with this system.
Note: Although the ENG Grip Relocator can be used with the Canon EOS C500, the C500 does not come with a Canon Grip, and a grip must be sourced separately.