See Options
Need help? Ask our experts.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
328' (100m)
JB Band: 125 kHz
All Other Bands: 25 kHz
>85 dB
-97 dBm at 10-5 BER
2.8 ms
160 Hz, -12 dB/octave
20 Hz-20 kHz (+1, -2 dB)
118 dB @1% THD (A-weighted, 20 Hz-20 kHz, typical)
<0.02%
XLR: Positive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of XLR output.
TRS: Positive pressure on microphone diaphragm produces positive voltage on the tip of the 1/4" (6.35mm) with respect to the ring of the 6.35mm output.
0 to 21 dB (in 3 dB steps)
0 Degree F to 122 Degree F (-18 Degree C to 50 Degree C)
-20 Degree F to 165 Degree F (-29 Degree C to 74 Degree C)
China
Black
Galvanized Steel
Single
G57: 470-608MHz
138MHz
24 bit
AES-256
Cable: 22" (55.8cm)
15 VDC @ 360 mA
>75 dB
BNC
50 Ohm
-18 to +42 dB in 1 dB steps
1/4" (6.35mm): Balanced (Tip=audio +, Ring=audio -, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
1/4" (6.35mm): 1.1 k Ohm (550 Ohm Unbalanced)
XLR (line): 500 Ohm (250 Ohm Unbalanced)
XLR (mic): 150 Ohm
1/4" (6.35mm): +18 dBV differentially (+12 dBV single)
XLR (LINE setting): +18 dBV
XLR (MIC setting): -12 dBV
30 dB pad
1/4" (6.35mm): Yes
XLR: Yes
Single Port Ethernet 10/100 Mbps
DHCP or Manual IP address
328' (100m)
1.65 x 7.76 x 5.98" (42 x 197 x 152mm)
2 lbs (900g) (without antennas)
Black
Aluminum
G57: 470-608MHz
138 MHz
118 dB
24 bit/48 kHz
Unbalanced
8.2 dBV
Integrated Single-Band Helical
<200 kHz
Shure Proprietary Digital
1 mW/10 mW
Rechargeable Li-Ion or 1.5 V AA batteries
Transmitter: 1.46 x 6.93" (3.71 x 17.60cm)
Transmitter: 5.08 oz (144g)
Black
Enamel-painted, die cast metal; matte-finished, silver colored, spherical steel mesh grille
Dynamic
50 to 15,000 Hz
Cardioid
-54.5 dBV/Pa (1.85 mV) (at 1,000 Hz Open circuit voltage)
1 Pa = 94 dB SPL
Rated impedance is 150 Ohm (300 Ohm actual) for connection to microphone inputs rated low impedance
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Three-pin professional audio connector (male XLR type)
6.37 x 2" (162 x 51mm)
10.51 oz (298g)
Black
PC/ABS
Bodypack
G57: 470-608MHz
138 MHz
118 dB
24 bit/48 kHz
4-Pin male mini connector (TA4M)
Unbalanced
1 M Ohm
8.2 dBV (2.57 Vrms, 7.27 Vpp)
Input Noise (EIN):-118 dBV
1/4 Wave
<200 kHz
Shure Proprietary Digital
1 mW/10 mW
Rechargeable Li-Ion or 1.5 V AA batteries
3.86 x 2.68 x 1" (98 x 68 x 25.4mm)
3.1 oz (88g)
Black
Condenser
Cardioid
70 Hz - 20 kHz
-43.0 dBV/Pa
20 dB SPL (Equivalent Acoustical)
74 dB (Using RPM400 Preamp)
140.5 dB SPL
120.5 dB
140-240 microA
5 VDC Bias
Positive pressure produces positive voltage on pin 3 with respect to pin 1
0.09" (2.2mm)
48.5" (1.23m)
Capsule: 0.53 x 0.50" (13.55 x 12.74mm)
With Cable: 0.71 oz (20g)
Required, included
Alkaline
AA
4
042406885515
The SLXD124+/85M Wireless Combo System unlocks a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. Delivering transparent, 24-bit digital audio and rock-solid RF performance, wide-tuning SLX-D+ transmitters and receivers stay in sync courtesy of a dedicated ShowLink Ease control link. Manage interference, scan for new channels and update for clear transmission automatically. Also monitor and configure via a paired mobile device.
- SLXD4+ Single-Channel Digital Wireless Rackmount Receiver -
The SLXD4+ is a single channel half-rack receiver for use with SLX-D+ transmitters. Unlock a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. With the crystal-clear audio and rock-steady RF that SLX-D+ provides, the SLXD4+ features a wide 138 MHz tuning range that stays in sync with SLX-D+ transmitters, courtesy of a dedicated ShowLink Ease control link. Manage interference, scan for new channels and update for clear transmission automatically.
With ShowLink Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including: Changing the transmitter frequency once open frequency is identified, Adjust transmitter gain, Automatically find and deploy new frequency to both receiver and transmitter upon interference, Lock and unlock transmitter controls, Transmitter firmware updates, Link 2nd transmitter to a receiver channel
Features
Patented Shure Digital Feedback Reducer software is embedded in every SLX-D+ receiver, to automatically reduce unwanted audio feedback, should it ever occur
Single channel half-rack design with rugged metal construction
- SLXD2+/58 Wireless Handheld Transmitter -
The SLXD2+/58 Wireless Handheld Transmitter sends transparent, 24-bit digital audio to SLX-D+ wireless receivers via a rock-solid RF connection. Unlock a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. With rugged metal construction, wide-tuning SLX-D+ handheld transmitters stay in sync with SLX-D+ receivers, courtesy of a dedicated ShowLink Ease control link. Manage interference, scan for new channels and update for clear transmission automatically. Also monitor and configure via a paired mobile device.
With ShowLink Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including: Changing the transmitter frequency once open frequency is identified, Adjust transmitter gain, Lock and unlock transmitter controls, Transmitter firmware updates
SM58 Vocal Microphone
If you've ever heard someone sing or speak into a live microphone, there's an excellent chance it was an SM58. Rock stars. Pop idols. Comedians. Presidents. Popes. Immortal words have passed through its iconic grille for generations. And with engineering and durability that set the world standard, it's sure to keep turning up at legendary performances.
The legendary Shure SM58 vocal microphone is designed for professional vocal use in live performance, sound reinforcement, and studio recording. Its tailored vocal response for sound is a world standard for singing or speech. A highly effective, built-in spherical filter minimizes wind and breath "pop" noise. A unidirectional (cardioid) pickup pattern isolates the main sound source while minimizing unwanted background noise.
Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently, outdoors or indoor
How It Works
Made to handle voice with clarity and care, the uniform cardioid polar pattern reproduces every note as it was intended. And it leaves background noise behind. On any stage - from the club show to the stadium - the SM58 delivers warm, crisp sound, time after time.
Why It's Better
Roll with no shake or rattle
Handling noise gets absorbed by the pneumatic shock mount, keeping the sound free of vibration.
Screen out unwanted air
When wind and plosives try to take over, the spherical mesh grille and built-in pop filter keep them out of the mix.
Rugged for the road ahead
Taking the show on tour The mic's durable construction and the break-resistant stand adapter keep the SM58 going strong through the toughest performances.
Features
Frequency response tailored for vocals, with brightened midrange and bass roll off
Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
Pneumatic shock-mount system cuts down handling noise
Effective, built-in spherical wind and pop filter
Supplied with break-resistant stand adapter which rotates 180 degrees
Legendary Shure quality, ruggedness and reliability
Cardioid (unidirectional) dynamic
- SLXD1+ Digital Wireless Bodypack transmitter -
The SLXD1+ Digital Wireless Bodypack transmitter sends transparent, 24-bit digital audio to SLX-D+ wireless receivers via a rock-solid RF connection. Unlock a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. With a durable and sleek design, wide-tuning SLX-D+ bodypack transmitters are easily concealed on-talent or as a part of wardrobe and stay in sync with SLX-D+ receivers, courtesy of a dedicated ShowLink Ease control link.
Manage interference, scan for new channels and update for clear transmission automatically. Also monitor and configure via a paired mobile device. The TA4F/TQG connector accepts a wide range of lavalier, instrument and headset microphones.
With ShowLink Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including: Changing the transmitter frequency once open frequency is identified, Adjust transmitter gain, Lock and unlock transmitter controls, Transmitter firmware updates
- WL185M Cardioid Condenser Lavalier Microphone -
Find the perfect audio solution for your presentations and performances with the Shure WL185M Cardioid Condenser Lavalier Microphone. Designed for professional use, this low-profile lavalier microphone is ideal for seamless integration with compatible wireless bodypack transmitters. The WL185M is 8 mm shorter than its predecessors, ensuring a discreet appearance without compromising on sound quality. Experience full and accurate audio reproduction with an enhanced presence response that captures crystal-clear vocals, making it an excellent choice for speakers, presenters, and performers.
Its innovative tie clip can be rotated in 90-degree intervals, allowing for precise and flexible microphone placement. This ensures optimal positioning for capturing the best sound possible. Each microphone comes equipped with a snap-fit windscreen to minimize wind noise, a single tie clip for secure attachment, and a zippered bag for convenient storage and transport.
Elevate your audio experience with the Shure WL185M Cardioid Condenser Lavalier Microphone, a reliable choice for those seeking professional-grade sound quality and adaptability.
Features
Professional low-profile lavalier condenser microphones
Cardioid (WL185m) polar pattern options
8mm shorter than original WL18X series
Higher dynamic range with improved max SPL, self-noise, and general sound quality when compared to original WL18X series
TA4F connector