See Options
Need help? Ask our experts.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
328' (100m)
JB Band: 125 kHz
All Other Bands: 25 kHz
>85 dB
-97 dBm at 10-5 BER
2.8 ms
160 Hz, -12 dB/octave
20 Hz-20 kHz (+1, -2 dB)
118 dB @1% THD (A-weighted, 20 Hz-20 kHz, typical)
<0.02%
XLR: Positive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of XLR output.
TRS: Positive pressure on microphone diaphragm produces positive voltage on the tip of the 1/4" (6.35mm) with respect to the ring of the 6.35 mm output.
0 to 21 dB (in 3 dB steps)
0 Degree F to 122 Degree F (-18 Degree C to 50 Degree C)
-20 Degree F to 165 Degree F (-29 Degree C to 74 Degree C)
China
Black
Galvanized Steel
>75 dB
BNC
50 Ohm
-18 to +42 dB in 1 dB steps
1/4" (6.35 mm): Balanced (Tip=audio +, Ring=audio -, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
1/4" (6.35 mm): 1.1 k Ohm (550 Ohm Unbalanced)
XLR (line): 500 Ohm (250 Ohm Unbalanced)
XLR (mic): 150 Ohm
1/4" (6.35 mm): +18 dBV differentially (+12 dBV single)
XLR (LINE setting): +18 dBV
XLR (MIC setting): -12 dBV
30 dB pad
1/4" (6.35 mm): Yes
XLR: Yes
Single Port Ethernet 10/100 Mbps
DHCP or Manual IP address
328' (100m)
1.65 x 7.76 x 5.98" (42 x 197 x 152mm)
31.74 oz (900g)
Black
PC/ABS
Bodypack
G57: 470-608MHz
138 MHz
118 dB
24 bit/48 kHz
4-Pin male mini connector (TA4M)
Unbalanced
1 M Ohm
8.2 dBV (2.57 Vrms, 7.27 Vpp)
Input Noise (EIN):-118 dBV
1/4 Wave
<200 kHz
Shure Proprietary Digital
1 mW/10 mW
Rechargeable Li-Ion or 1.5 V AA batteries
Required, included
Alkaline
AA
2
3.86 x 2.68 x 1" (98 x 68 x 25.4mm)
3.1 oz (89g)
Electret Condenser
40 Hz to 20,000 Hz
Unidirectional (Cardioid)
2400 Ohms
-59.0 dBV/Pa
55 dB
153.0 dB
114.0 dB
3.6' (1.1m)
39 dB (Typical, A-Weighted)
Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
+5 V DC (nominal), 10 V maximum (DC bias)
2.53 oz (72g)
042406885935
The SLXD14+ Digital Wireless Bodypack System unlocks a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. Delivering transparent, 24-bit digital audio and rock-solid RF performance, wide-tuning SLX-D+ transmitters and receivers stay in sync courtesy of a dedicated ShowLink Ease control link. Manage interference, scan for new channels and update for clear transmission automatically. Also monitor and configure via a paired mobile device.
- SLXD4+ Single-Channel Digital Wireless Rackmount Receiver -
The SLXD4+ is a single channel half-rack receiver for use with SLX-D+ transmitters. Unlock a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. With the crystal-clear audio and rock-steady RF that SLX-D+ provides, the SLXD4+ features a wide 138 MHz tuning range that stays in sync with SLX-D+ transmitters, courtesy of a dedicated ShowLink Ease control link. Manage interference, scan for new channels and update for clear transmission automatically.
With ShowLink Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including: Changing the transmitter frequency once open frequency is identified, Adjust transmitter gain, Automatically find and deploy new frequency to both receiver and transmitter upon interference, Lock and unlock transmitter controls, Transmitter firmware updates, Link 2nd transmitter to a receiver channel
Features
Patented Shure Digital Feedback Reducer software is embedded in every SLX-D+ receiver, to automatically reduce unwanted audio feedback, should it ever occur
Single channel half-rack design with rugged metal construction
- SLXD1+ Digital Wireless Bodypack Transmitter -
The SLXD1+ Digital Wireless Bodypack transmitter sends transparent, 24-bit digital audio to SLX-D+ wireless receivers via a rock-solid RF connection. Unlock a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. With a durable and sleek design, wide-tuning SLX-D+ bodypack transmitters are easily concealed on-talent or as a part of wardrobe and stay in sync with SLX-D+ receivers, courtesy of a dedicated ShowLink Ease control link.
Manage interference, scan for new channels and update for clear transmission automatically. Also monitor and configure via a paired mobile device. The TA4F/TQG connector accepts a wide range of lavalier, instrument and headset microphones.
With ShowLink Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including: Changing the transmitter frequency once open frequency is identified, Adjust transmitter gain, Lock and unlock transmitter controls, Transmitter firmware updates
Features
Up to 8 hours of use from either 2 AA batteries (included) or optional Shure SB903 Li-ion rechargeable batteries and charging accessories
Ergonomic and durable plastic construction
- SM35 Cardioid Condenser Lavalier Microphone -The SM35 Performance Headset Condenser Microphone gives multi-instrumentalists the freedom to express themselves without sacrificing sound quality. A tight, unidirectional cardioid polar pattern provides excellent rejection of off-axis sound sources to prevent feedback and signal bleed onstage, whether in use in small clubs, large installations, or arena tours.
Feature
Wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
Tight, unidirectional cardioid polar pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
Flexible gooseneck design allows for optimized placement that further improves source isolation
Lightweight and low-profile form enables comfortable, long-wearing use
TA4F (TQG) connector is compatible with any Shure wireless bodypack
Locking snap-fit windscreens tame plosives, breath, and wind noise for clean and intelligible sound
Tailored frequency response refined for clear, crisp vocal reproduction
Included in BLX and GLX-D wireless systems, renowned for their ease of use and reliable performance
Legendary Shure precision engineering for durability and performance