See Options
Need help? Ask our experts.
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
328' (100m)
JB Band: 125 kHz
All Other Bands: 25 kHz
>85 dB
-97 dBm at 10-5 BER
2.8 ms
160 Hz, -12 dB/octave
20 Hz-20 kHz (+1, -2 dB)
118 dB @1% THD (A-weighted, 20 Hz-20 kHz, typical)
<0.02%
XLR: Positive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of XLR output.
TRS: Positive pressure on microphone diaphragm produces positive voltage on the tip of the 1/4" (6.35mm) with respect to the ring of the 6.35mm output.
0 to 21 dB (in 3 dB steps)
0 Degree F to 122 Degree F (-18 Degree C to 50 Degree C)
-20 Degree F to 165 Degree F (-29 Degree C to 74 Degree C)
China
Black
Galvanized Steel
>75 dB
BNC
50 Ohm
-18 to +42 dB in 1 dB steps
1/4" (6.35mm): Balanced (Tip=audio +, Ring=audio -, Sleeve=ground)
XLR: Balanced (1=ground, 2=audio +, 3=audio -)
1/4" (6.35mm): 1.1 k Ohm (550 Ohm Unbalanced)
XLR (line): 500 Ohm (250 Ohm Unbalanced)
XLR (mic): 150 Ohm
1/4" (6.35mm): +18 dBV differentially (+12 dBV single)
XLR (LINE setting): +18 dBV
XLR (MIC setting): -12 dBV
30 dB pad
1/4" (6.35mm): Yes
XLR: Yes
Single Port Ethernet 10/100 Mbps
DHCP or Manual IP address
328' (100m)
1.65 x 7.76 x 5.98" (42 x 197 x 152mm)
2 lbs (900g) (without antennas)
Black
Aluminum
Handheld
G57: 470-608MHz
138MHz
118 dB
24 bit
Unbalanced
8.2 dBV (2.57 Vrms, 7.27 Vpp)
Integrated Single-Band Helical
<200 kHz
Shure Proprietary Digital
1 mW/10 mW
Rechargeable Li-Ion or 1.5 V AA batteries
Required, included
Alkaline
AA
2
1.46 x 6.93" (37.1 x 176mm)
5.08 oz (144g)
Electret Condenser
50 to 20,000 Hz
Three-pin professional audio (XLR), male
Supercardioid
150 ohms
-52.5 dBV/Pa (2 mV) 1 Pascal=94 dB SPL (at 1kHz, open circuit voltage)
140.5 dB (1 kHz at 1% THD, 1k ohms load)
70.5 dB (referenced at 94 dB SPL at 1 kHz)
S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
117 dB
-6 dBV (0.5 V) (1 kHz at 0.25% THD, 1k ohms load)
23.5 dB typical (typical, equivalent SPL, A-weighted)
11 to 52 Vdc phantom (1.2 mA)
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
7.3 oz (207g)
042406897129
The SLXD24+/B87A Digital Wireless Handheld System unlocks a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. Delivering transparent, 24-bit digital audio and rock-solid RF performance, wide-tuning SLX-D+ transmitters and receivers stay in sync courtesy of a dedicated ShowLink Ease control link. Manage interference, scan for new channels and update for clear transmission automatically. Also monitor and configure via a paired mobile device.
- SLXD4+ Single-Channel Digital Wireless Rackmount Receiver -
The SLXD4+ is a single channel half-rack receiver for use with SLX-D+ transmitters. Unlock a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. With the crystal-clear audio and rock-steady RF that SLX-D+ provides, the SLXD4+ features a wide 138 MHz tuning range that stays in sync with SLX-D+ transmitters, courtesy of a dedicated ShowLink Ease control link. Manage interference, scan for new channels and update for clear transmission automatically.
With ShowLink Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including: Changing the transmitter frequency once open frequency is identified, Adjust transmitter gain, Automatically find and deploy new frequency to both receiver and transmitter upon interference, Lock and unlock transmitter controls, Transmitter firmware updates, Link 2nd transmitter to a receiver channel
- SLXD2+/B87A Wireless Handheld Transmitter -
The SLXD2+/B87A Wireless Handheld Transmitter sends transparent, 24-bit digital audio to SLX-D+ wireless receivers via a rock-solid RF connection. Unlock a new world of hands-free oversight and management for seasoned volunteers and pro engineers alike. With rugged metal construction, wide-tuning SLX-D+ handheld transmitters stay in sync with SLX-D+ receivers, courtesy of a dedicated ShowLink Ease control link. Manage interference, scan for new channels and update for clear transmission automatically. Also monitor and configure via a paired mobile device.
With ShowLink Ease, transmitter parameters can be adjusted remotely over the air from the linked receiver, including: Changing the transmitter frequency once open frequency is identified, Adjust transmitter gain, Lock and unlock transmitter controls, Transmitter firmware updates
Beta 87A Vocal Microphone
Add some studio-grade clarity to the live mix. Designed to capture brighter vocals with sparkling accuracy, the BETA 87A brings more crisp to the concert. And the increased presence will have everyone singing your praises.
The Shure BETA87A is a premium quality supercardioid hand-held electret condenser vocal microphone with exceptionally smooth frequency response and high sound pressure level capability. Used for professional sound reinforcement, broadcasting, and studio recording applications, the Beta 87A combines superb performance with the ruggedness needed for touring and field production.
The Beta 87A features a controlled low-frequency roll-off that compensates for proximity effect and prevents the "boomy" sound often associated with close pick-up. The characteristic Shure presence rise brightens the upper midrange. The tight supercardioid pattern, with null points at approximately 125 degrees, provides maximum isolation from other vocalists or instruments while offering minimal off-axis coloration. The Beta 87A operates on phantom power.
How It Works
One of the world's best-selling, single-element, condenser mic, the BETA 87A puts singers on a pedestal. Tailored frequency response concentrates on the upper midrange to raise vocal presence in the mix. So voices cut through clearly and resonate deeply with your audience.
Why It's Better
Set your singing apart
The supercardioid pattern provides maximum isolation of your voice, giving you the chance to shine.
Never overpowered
Get right up on the mic without overwhelming the sound. Electronically controlled low-end roll-off keeps your bass from blasting over the mix.
Resists rattle
The advanced cartridge shock-mount system lets you handle the mic a little harder while absorbing any mechanical noise.
Features
Smooth frequency response with gradual presence rise
Highly consistent supercardioid polar pattern provides superior gain-before-feedback
Electronic low-frequency roll-off compensates for proximity effect
Wide dynamic range (117 dB) and low distortion characteristics
Very low susceptibility to RFI and electromagnetic hum
Advanced cartridge shock-mount system absorbs mechanical shocks and reduces handling noise
Built-in pop filter reduces undesirable wind and breath sounds
Legendary Shure quality and reliability