
Review Summary
2012-02-12T19:00:00
This will be used with a 4x5 view camera and will be great and traditional.
DANNY W.
2009-03-08T21:00:00
I am very technical, but certain things were made better by using simpler materials and straightforward craftsmanship. The aesthetics of a wood tripod should not be overlooked. I used to own a Bogen 3021 / 3047 head. I am a hard user - I will go in streams, ice, sand, rock - I treat my equipment with respect but need it to perform under extreme conditions. My old Bogen still works like the day I purchased it with the exception of some scratches to the surface from sand. My comment on aesthetics is that I feel an organic respect for my 8023 that I will never have for a piece of steel & aluminum. The positive: It is sturdy - not like a rock (or even a tree root) but good for everything except violent winds. The legs are fast and intuitive; to extend them you roll a sturdy piece of nylon (wish it were steel) to a very visible white, red or blank mark. It reasonably weighted. I use a cheap Amvona ball head (which I machined and repaired to make it work) and have a total weight of 6 or 7 pounds. Bottom line, it is wood, it is comfortable to the touch - gloved or not - and does not conduct heat away from your hands. Negative: None of my complaints are deal breakers, but if they were incorporated into a newer model, I would buy it tomorrow. The release mechanism of the legs could be different; they are simple metric screws with knobs. I know they are metric as I have lost one and had to make my own as a replacement. A lever would be faster and would never fall out. The center column lever had to handled with kid gloves as mine broke after something whacked it. I replaced it with another metric screw and knob which is a much better way to go. Also, the center column is not stable. I have the standard length column and will not use it past half its length unless I am using my off camera shutter release and it is calm outside. Also the acorn nut that retains the legs loosen. Never lost one, and I carry a Leatherman, but still a minor drag. Summary: I love my tripod. I have used it in abrasive conditions and it has held up admirably. While fully extended, it is nicely balanced and can be carried comfortably for long distances. Sand, snow, murky water, ice, the legs do not wear. It is meant for the out doors; not to be excluded from civilized conditions, but I’d rather be out than in any day.
jason l.
2007-10-18T21:00:00
I used a aluminum tripod and a 3-way panhead for years. I wanted a nicer and lighter tripod. I looked at carbon fiber but was turned off by the high prices and a lot of negative reports on the legs sticking. Wood doesn’t stick. I chose the Berlebach 8023 Report wood tripod and teamed it with a Acratech ball head. I also opt for the short center column as I do not use the long column for anything and like to get down close to the ground for micro work. The short column lets me do this. The old with the new. I guess the first tripods were made from wood and maybe for a good reason. The weight carrying ability of a wood tripod compared with its own weight is as good as or better than most any other tripod. I use this tripod and head combination (7 lbs. 6 oz.) with my Nikon F-100. My lens include most everything between a std. 55mm, f1.8, to my 80-200mm, f2.8. No problems at all. The head is great and the tripod perfect. If you notice on the Berlebach, the legs are attached to 6 points as opposed to 3 on other standard tripods. This makes it much more stable to start with. I am 61 years old and don't mind carrying this over my shoulder on a 2 - 3 mile hike wearing my photo backpack. The wood legs are uncomfortable on the shoulder but the padded backpack straps takes care of this. If I just want to take the camera and tripod, I use a tripod strap. People keep saying that carbon fiber is the way to go, but at half the price, I'll keep the Berlebach. I also keep thinking those who want to save 2 - 3 lbs. on a tripod, maybe it's not the tripod than needs to shave a few lbs. I highly recommend the Berlebach 8023 Report for anything a weekend photographer or professional photographer would want to use it for, indoors or out and it looks great.
Jim R.
Team the old with the new
By Jim R.
I used a aluminum tripod and a 3-way panhead for years. I wanted a nicer and lighter tripod. I looked at carbon fiber but was turned off by the high prices and a lot of negative reports on the legs sticking. Wood doesn’t stick. I chose the Berlebach 8023 Report wood tripod and teamed it with a Acratech ball head. I also opt for the short center column as I do not use the long column for anything and like to get down close to the ground for micro work. The short column lets me do this. The o...
View full Review
Berlebach ash wood tripods are low-vibration products. Ash wood is capable of compensating for the shudders and vibrations that constantly occur in the working environment. It will ensure that you get exceptional results with your camera or your sensitive optical or measuring equipment.
Wood is electrically non-conductive, thus preventing the damaging effects of electromagnetic fields and electrostatic charging. Thanks to their favorable weight. Berlebach ash wood tripods deliver optimum stability under load. Berlebach ash wood tripods are robust and ideal for tough day to day use.
Berlebach ash wood tripods can be used in climatic extremes. They have served, for instance, on expeditions to the north and south pole, in the desert and the rain forest. Unlike metal tripods, wooden tripods warm up very slowly in direct sunlight. In extremely cold conditions, you can touch a wooden tripod without having to wear gloves.
Berlebach has been using ash wood- a renewable raw material- for almost 100 years. The processed wood, know as sport ash, comes from the best controlled forests in Europe. It is especially hard-wearing and elastic, as well as resistant to the forces of nature.
Having been dried, the wood is stored, prior to processing, for two years to eliminate any tension within the wood as a result of growth. Several layers of protecting varnish guarantee long-term care of the wood's surface. Berlebach ash wood tripods have earned several awards for outstanding design achievement. Berlebach ash wood tripods guarantee best value for money.
The 3-section 8023 model features a sliding center-column which adds additional height adjustment. These center-columns are manufactured from precision-drawn light-metal tubing which are built into the tripod to assure very precise fitting. Optional use of an extra-short center column (10 cm) enables near-ground-level work as well.