

This item is no longer available.
Review Summary
2012-02-26T19:00:00
I am using the camera for family portraits; and have been very happy with the results.
GREGORY B.
2011-12-11T19:00:00
Great all around camera! Medium Format image quality, slightly bigger than an SLR. I shoot film and digital with a ZD back. It's an older back that's a little slow but some times that's a good thing. Versatile camera can be used with different backs.
Ed
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Medium Format SLR (Single Lens Reflex) Camera
6x4.5cm format (actual image size 56x41.5mm)
Mamiya 645 AF Mount
Compatible with M645 mount (manual focus confirmation, focus aid, stop-down exposure metering)
Fixed prism viewfinder magnification x0.71
Info: Focus mark, Out-of-focus direction marks, Aperture value, Shutter speed, Metering mode (A, S, A/S), Exposure compensation value (difference between set value and actual value), Flash Ready/OK, AE Lock, Bracketing Position
On camera body shows: Aperture value, Shutter speed value, AEL
Battery check, Programmed AE, Programmed AE shift value, Data imprinting mode, Flash Compensation Indicator (Over/Under), Auto-Bracketing indicator
Multiple Exposure indicator, Self-Timer indicator
On Interchangeable Film Magazine Shows: ISO speed, Type of film (120 or 220), Exposure number
TTL phase-difference detection type
Interchangeable: Matte (supplied with camera)
Grid (Checker)
Manual Focus Microprism for M645 lenses
+/-3 EV (1/3 step)
5-segment evaluative center-weighted average (AV) with bright point elimination Spot (S)
Variable Ratio Auto-Shift (A-S)
Enabled with MODE button (1/3,1/2, 2/3 and 1-step units) active until deselected
EV 2 to EV 19 (with ISO 100 film, f/2.8 lens)
Electronically controlled vertical metal focal-plane shutter
Speeds AE 30 to 1/4000 sec. (1/8 step)
Manual 30 to 1/4000 sec. (1/2 step)
X (locks shutter speed to 1/125th sec. while allowing for full control of aperture values)
B (Bulb, electronically controlled)
T (Time, mech. controlled)
/screw-in cable release on shutter button; Remote-Control Terminal on left side of the body: Cble Release RE401 (#211755) 5m and coiled; Cble Release RE402 (#211754) 1m and is straight.
ISO 25 to 6400
1/125 sec. or slower, automatically sets to 1/125 when shutter speed dial is set to higher speeds (when Metz flash unit is used). In P mode, the shutter speeds are controlled to 1/125 1/60 sec.
Automatic via built-in motor, single or continuous exposures 1.2 frames per second.
Yes, Year
Month
Date
Time
1/4 inch and 3/8 inch included
Built-in Diopter adjustment -2.5 to +0.5 (separate diopter correction lenses provide adjustment ranges of -5 to -2 and 0 to +3)
3 to 60 sec. (default setting: 10 sec., can be set in 1 sec. steps between 3 and 10 sec., and in 10 sec steps between 10 and 60 sec.)
Terminal On side of body (works with remote triggering devices and electromagnetic cable releases)
X contact (sync speed 1/125th sec. and slower)
Preview button on front of camera, aperture can be changed during DOF check
Yes, via Mirror Lock Switch on body
Enabled with MODE button (2 to 6 exposures); can be cancelled. More exposures may be dialed in before exposure set is complete.
The "FUNCTION" key and "F1" key are data imprint function settings to turn viewfinder indicators on and off, and to turn the dial lock on and off. The "F2" key sets the date and time and initializes the index number. For each setting, a digital dial is used in combination with the "SET" button, which can be used alone to check current settings.
6 AA batteries (alkaline-magnesium or lithium)
6"(W) x 5"(H) x 7"(D) (153 x 128 x 184mm)
61oz. (1730g). w/o batteries
3 CCD line sensors (area indicated on the focusing screen)


Join VIP PRO
Earn 2X Points + Exclusive Perks!
Request a Callback
Chat one-on-one with an expert
Sell or Trade your Gear
Get started in 3 easy steps