Anker 535 PowerHouse 500W 512Wh Portable Power Station with 625 100W Solar Panel

Long-Lasting Portable Power Station With a 10-Year Lifespan
With our proprietary long-lasting technology InfiniPower, combined with LiFePO4 batteries, ultra-durable electronic components, a smart temperature control system that monitors temperature up to 100 times per second, and impact-resistant structural design, Anker 535 PowerHouse is built to last over a decade, even with everyday use.

High Conversion Efficiency
The solar panel converts up to 23% of solar energy to electrical energy even on cloudy days. Recharge the panel to 80% in 2.5 hours under direct sunlight.

Smart Sunlight Alignment
Equipped with Anker's proprietary Suncast technology, adjust the solar panels properly to capture direct sunlight for maximum charge.

Extra USB-C Port
Recharge the portable power station to 80% in under 2.5 hours via the in-box adapter and a USB-C port. Charging your laptops at fast speeds only requires a single cable, so no bulky adapters are needed.

All-Round Capacity
With a 512Wh capacity, the power station is an all-round solution to charge all your necessities. Seamlessly power a heater, portable fridge, lamp, and TV.

The Ultra-Durable Portable Power Station
• LiFePO4 batteries with 6X longer lifespan
• Electronic component of up to 50,000 hours life expectancy
• Drop-proof design

Charge Essential Devices During Outdoors Or Blackouts
• Phone 40X
• Camera 30X
• Drone 10X
• Mini Fridge 10H
• TV 3H+
• Lamp 32H
• Wi-Fi Router 38H+
• Fan 11H+
• CPAP 9H+
• Laptop 8X+

• When the control buttons are turned on, even if no devices are being charged, there will still be a certain amount of no load power consumption. Therefore, it is recommended to turn off the control buttons after using them to avoid draining power.

• The power station supports pass-through charging.

• Compatible with USB-C MacBooks, iPad, iPhone 8 / X / 11 / 12 / 13 (Lightning cable required), Android smartphones and tablets, and other USB-charged devices.

• Incompatible with appliances that require more than 500W input such as microwaves, electric grills, refrigerators, electric vehicles, coffee machines, and more.

• If you feel that the battery drains fast when used for the first time, it is because the display information of the remaining power is inaccurate when the product is activated for the first time. The power remaining will automatically calibrate by discharging the battery to 1% and then recharging it to 100%.

• A compatible solar panel for Anker PowerHouse will be available soon.

Power Saving Mode On
Put Your Power Station to Sleep
Switching on the energy-saving mode will automatically turn off the power station once all your devices are fully charged to prevent wasting power.

Make the Most of Your Power Station
Switching off the energy-saving mode will enable stable charging and keep your devices running during long usage like time-lapse photography. When power saving mode is off, PowerHouse will enable stable charging for prolonged use scenarios such as time-lapse photography or to keep CPAP machines running.

Ideal for Low-Light Environments
During trips or emergencies, the portable power station is equipped with a built-in light bar for added convenience.

Smart Display at a Glance
Equipped with an informative LED display that lets you clearly see the cell capacity, current input and output, and estimated time for PowerHouse to fully recharge.

Powerfully Quiet
The power station operates at whisper-quiet levels at all times thanks to an internal chip and intelligent AI algorithm, so you barely know it's on.

Works for Small-to-Medium Devices
Please note that the power station only supports devices and appliances with a rating less than 500W.

6 x Longer-Lasting
With premium LiFePO4 batteries, get 3,000 complete charge cycles and 6 x longer battery lifespan compared to the standard lithium-ion batteries.

Clean and Efficient Solar Energy
Harness the clean, renewable energy of the sun with a high conversion efficiency that converts up to 23% of solar energy into electrical energy.

Sustainable Solar Charging
Recharge the portable power station to 80% in 4 hours under direct sunlight conditions. (Note: Works with pass-through charging and Maximum Power Point Tracking (MPPT) to get the highest efficiency while solar charging)

Smart Sunlight Tracking System
With Suncast technology's guidance, adjust the panels properly for optimal solar charging.

Make the Most Of Your PowerHouse
Switching on power-saving mode enables the power station to turn off right away when your devices are fully charged. Switching off power-saving mode will enable stable charging for prolonged use.

Keep An Eye On Your Power
The smart LED display lets you easily track the power station's vital information such as remaining capacity, current input and output, and the time left to fully recharge the battery.