
See Options
2 Year
$289.99
3 Year
$449.99
4 Year
$549.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
4 x Programmable Bi-directional RS-232/422/485 Port (4 x DB9 Male Connector, configurable via pin assignments)
Baud Rate: 300 to 115200 (default: 9600)
Data Bit: 8 (default) or 7
Stop Bit: 1 (default) or 2
Parity: None (default), Even or Odd
Flow Control: None (default) RTS/CTS
2 x Bi-directional RS-232 Port (2 x 3-Pole Terminal Block Connector)
Baud Rate: 300 to 115200 (default: 9600)
Data Bit: 8 (default) or 7
Stop Bit: 1 (default) or 2
Parity: None (default), even or odd
4 x Programmable Digital Input / Output Channel (1 x 5-Pole Terminal Block Connector)
Digital Output: 250 mA sink from 12 VDC
Digital Input: VDC Mode: 0 to 24 VDC
Input Voltage Range:0 to 24 VDC, Programmable Range: 1 to 24 VDC
Dry Contact Mode: Pull-up 2k ohms to + 12 VDC
4 x Relay Channel (2 x 4-Pole Terminal Block Connector)
Normally open, isolated Relays
Contact Rating: Max 24 VDC, 2A
4 x 12 VDC Output Port (2 x 4-Pole Terminal Block Connector)
Power Supply: 12 VDC, 2A Max (shared by 4 ports)
1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:IP: 192.168.0.60,Subnet Mask: 255.255.255.0
Establishes VK2100 connection with the VK6000 (ATEN Configurator) and iPad (ATEN Control System App)
1 x 16-segment Switch
1 x On/Off Switch
1 x IR Receiver LED
1 x Semi-recessed Pushbutton
1 x USB Type A
40 Watt
Internal Power: 100-240 VAC, 50-60 Hz
0 to 50 deg. C / 32 to 122 deg. F
-20 to 60 deg. C / -4 to 140 deg. F
0 - 80% RH, Non-Condensing
Metal
43.72 x 16.32 x 4.40cm / 17.21 x 6.43 x 1.73"
2.64kg / 5.82lbs
672792006043
Make your room or facility management effortless with the ATEN Control System, a comprehensive solution that includes the VK2100 Controller, VK6000 Configurator, and the ATEN Control System App. This Ethernet-based control system seamlessly connects all hardware devices in a room or large facility, providing centralized, direct control via an iPad.
The VK2100, acting as the primary controller, offers extensive connectivity to a wide range of hardware devices typically found in a room. Once these devices are connected, the VK6000 software facilitates customizable device configuration through a simple, four-step system project creation process.
With the ATEN Control System App, you gain the flexibility to control various hardware devices in different rooms at your convenience. This is made possible by connecting to the VK2100 via Ethernet. The VK2100 can be easily integrated into an existing setup and works flawlessly with ATEN VanCryst pro-A/V products and a comprehensive range of hardware devices, such as A/V equipment, lighting systems, air conditioning, motion sensors, power switches, and more.
The VK2100 serves as a centralized platform for monitoring, managing, and controlling hardware devices directly via a custom GUI from an iPad. The VK6000 offers a quick setup that simplifies the configuration of hardware control and device operations through an intuitive GUI.
The ATEN Control System App, through an Ethernet connection, allows you to import and update viewer profiles from the VK2100 via a point-n-tap user interface. Each viewer profile offers a customized control GUI for quick access to target hardware devices, with password authentication for secure system access.
The ATEN Control System is ideal for meeting rooms, conference centers, boardrooms, classrooms, or any room that requires efficient and streamlined management of various hardware devices. The VK2100 Controller supports multiple connecting interfaces, has an IR Learning function for adding IR device drivers, and features easy system settings via a web GUI.
The VK6000 Configurator Software offers a simple profile setup, customizable GUI design for the iPad, a built-in Database Generator for device driver setup, and supports Telnet and PJLink protocols for controlling LAN devices over a network.
The ATEN Control System App allows administrators to centrally control multiple rooms via different profiles on a single iPad, with restricted user access to profiles via password authentication. Experience the convenience and efficiency of the ATEN Control System, a comprehensive solution for your room or facility management needs.
888-999-2836