2025-06-28T20:00:00
Rated 5 out of 5
Good service
Very helpful on line chat service
The main reason I made the purchase
Scott G.
Originally posted at
2023-05-30T20:00:00
Rated 1 out of 5
Wrong advise.
I never ended up using it. While in the prosses of trying to install new film wear, I had a warning pop up to tell me it needed to be updated and it gave me a link to do it wirelessly.
So now can I return the old new cable that I never used???.
Rick 2.
Originally posted at
2023-04-16T20:00:00
Rated 5 out of 5
Quick & easy
This was a straight-forward order of basic accessories, so not much to say.
Rainer
Originally posted at
2021-08-27T20:00:00
Rated 1 out of 5
$40 for cable?!
$40?!!! You probably kidding, right? It took me 15 minutes to cut the end of the USB cable and solder it directly to the back of the jack inside the device. All you need just internet to see pin outs. Good luck selling air!
Shuher
Originally posted at
2021-07-22T20:00:00
Rated 1 out of 5
Doesn't Work!
Using a Synology NAS I attempted to use this cable to get my BR1500 APC UPS to signal a power outage. The cable is NOT a direct USB to RJ45 conversion and no signal is received by the NAS.
tjrb
Originally posted at
2021-03-09T19:00:00
Rated 1 out of 5
Overpriced
I bought this item for much much less through a GSA distributor. But even that price was more than I think it's worth.
pokeeffe
Originally posted at
2019-01-08T19:00:00
Rated 1 out of 5
$40 USB cable
The cable works fine, but the price is completely ridiculous. Most other UPS brands have a USB connection on their UPS so you can just use any old USB cable. However APC uses the very rare 10 pin RJ50 connector on the end of an otherwise standard USB cable and increases the price by 400%. Ridiculous. This is enough reason to look to other UPS brands.
elsalty
Originally posted at
2018-12-08T19:00:00
Rated 4 out of 5
APC UPS Data Cable / USB Type A to 10P10C/RJ50
For the benefit of others, I recently purchased this data cable to connect an APC Back-UPS ES 500 (model BE500U) to Apple iMac running macOS El Capitan 10.11.6. Works as intended. As soon as cable is plugged in the UPS tab will appear in Energy Saver Settings under Apple System Preferences. If the UPS continues to beep, it likely just needs a new replacement battery (in this case, an APC RBC2 or equivalent). Please note that the modular connector on the cable is not an RJ45 8-pin (8P8C) connector, but rather a 10-pin (10P10C) connector, unofficially known as RJ50. You cannot use a USB to Ethernet RJ-45 cable as a substitute. As this product is no longer available via the links on this page, you can find one on eBay or elsewhere on the web, and not for nothing, at a much more appropriate cost point.
terforma
Originally posted at
2014-09-05T20:00:00
Rated 1 out of 5
apc data cable (made of titanium?)
The cost is outrageous.!
Already pd a premium.!
0
Originally posted at
2013-06-17T20:00:00
Rated 1 out of 5
NO technicals
I am unimpressed with this level of support. Why not a simple schematic for such a simple cable? When in Timbuktu, I cannot wait for a new factory one - as nice as that might be. Box lable says Serial /USB so what can I hook it to? Notes say not to use external USB adapter but what if it's powered from the same AC? No manual for the PowerChute SW so no help there. Even a detailed tech manual for the UPS connectors would be nice - no cigar - clearly in only the selling biz, not the support biz too - ONE star.
0
Originally posted at
_logo.gif){kind=logo}
