
See Options
2 Year
$299.99
3 Year
$449.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Ethernet Control: Standard RJ45 10/100 Ethernet w/auto-configuration
RS-232 Control: Standard female Dsub9 jack
4-pin Serial Data Remote: 4-pin Euroblock for phantom-poweredbi-directional remotes
Logic Inputs: 9-pin Euroblock for (8) assignable 5V logic inputs
Logic Outputs: Shared with logic inputs. +12V @ 10mA output high, 100mA input low
Remote Attenuators: 10-pin Euroblock for (8) assignable 0-5VDC passive remote attenuators
48kHz, 96kHz
32-Bit floating-point SHARC processor array
Selectable in adjacent channel pairs from analog, AES3, or network inputs
Dante
Selectable between input/output or internal to matrix mixer
0.5nS average, 1.0nS peak
20Hz-20kHz:
A > D: +/- 0.1dB
D > A: +/-0.25dB
A > A: +/-0.25dB
20Hz-20kHz, Unweighted:
A > D: > 115dB
D > A: 114dB
A > A: 114dB
1kHz, +20dBu Analog(-1dBFS digital):
A > D: < 0.001%
D > A: < 0.002%
A > A: < 0.002%
D > D: < 0.00001%
@ 48kHz:
A > D: 1.42ms
D > A: 0.90ms
A > A: 2.21ms
D > D: 0.10ms
@ 96kHz:
A > D: 0.71ms
D > A: 0.45ms
A > A: 1.11ms
D > D: 0.05ms
75 Ohms BNC
48kHz +/- 4%, 96kHz +/- 4%
Selectable 75 Ohm or high impedance
1.0Vpp-7.0Vpp
75 Ohms
5.0Vpp nominal, unterminated
Audio network, Word Clock, AES3,Internal crystal clock
Prioritized auto switching or manual
Input Type: Active balanced Euroblock
Input Impedance: 20k Ohms
Max Input Level: +20dBu
Output Impedance: 20 Ohms
Max Output Level: +20dBu
10/100 Ethernet port, RS-232 port, Euroblock inputs/outputs, Four option bays, Word Clock in/out, Remote level control, Logic I/O, Data in/out ports, On/off switch
40-120 degree F (4-49 degree C) (noncondensing)
AC Mains: 90-240VAC, 50-60Hz, 70W Max
Power Cable Connector: 15A Edison 3-Prong IEC
Analog, Auto (Net, AES3, Analog)
-20dBu to +20dBu
infinity
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
-20dBu to +20dBu
1.2:1 to infinite
0.2 to 50ms
5ms/dB to 1000ms/dB
Peak/Average
4 available
In, Out, Attenuation, Graphical
-40dBu to +20dBu
Gentle, normal, aggressive, user-defined
0dB to +22dB
Input Level, Gain, Attenuation
1.2:1 to 10:1
-30dB to 0dB
5ms/dB to 1000ms/dB
0-6 sec
-20dB to +20dB
-40dB to -1dB
0.2s/dB to 20s/dB
8 available
1-2 or 1-4
-40dBu to +20dBu
0.3:1 to 3:1
Input level, Attenuation, Average noise
-80dBu to +20 dBu
5ms/dB to 1000ms/dB
0dB to -30dB, infinity
Yes
Input
-80dBu to +20dBu
off, 100dB to 0dB
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
Key Signal, Gate LED, Graphical
Yes
20Hz to 20kHz
0.016 to 3.995 Octave
-50dB to +12dB, off, polarity invert
4 available
Enable per channel, 0dB to infinity
0 to -50dB, Mute
Constant Q or Proportional Q
0.499oct to 0.25oct
20-20kHz
-30dB to +15dB
0.016 to 3.995 Octave
20Hz-20kHz
-15dB to +15dB
20Hz-20kHz
20Hz-20kHz
3.047 to 0.267
20Hz-20kHz
0.016 to 3.995 oct.
12
Yes
Float, Restricted, Manual, Lock
Notch, Parametric
20Hz to 20kHz
+15dB to -30dB
0.016 to 3.995 Octave
5 levels
5 seconds to 24 hours (Only available w/ 48kHz sampling rate (inputs only))
12/18/24/48 dB/oct
12/24/48 dB/oct
4th Order, 8th Order
Off, 20Hz-20KHz
0-58.65ms
0-1,365.31ms
0-29.32ms
0-682.65ms
-60dBu to +20dBu
1dB
Yes
Off, -50dBu to +20dBu
20Hz-12kHz
Off, -50dB to +12dB
Input
Automix assign per input
0.01sec to 2sec
Yes
Per channel if enabled
Level, auto-mixer level
24 bit
32-bit floating point
48kHz, 96kHz
19 x 3.5 x 8.5" (483 x 89 x 216mm)
10.5 lb (4.77kg)
A cutting-edge solution for audio processing in networked systems, the Ashly ne8800 Network Enabled Protea DSP Audio System Processor simplifies connectivity and control. This high-quality processor is designed to complement our amplifiers, offering effortless setup and control via standard 10/100 Ethernet protocol and Protea ne Software. No need for special outboard control units.
The ne8800 model comes with an 8x8 analog line input/output format, and four option bays that support network audio, AES3, and mic input options. It is equipped with a Dante option card, making it easy to integrate into a Dante networked audio system.
The processor utilizes multiple SHARC 32-Bit processors, offering sample rates of either 48kHz or 96kHz. Its extensive DSP signal processing library includes a matrix mixer (either 4x4, 4x8 or 8x8), a comprehensive array of graphic, parametric and all pass equalization, and crossover filters including 8th-order Butterworth, Bessel, Linkwitz-Riley and notched Linkwitz-Riley.
The Protea Software Suite also features an advanced automatic feedback suppressor, FIR filter capability, gain sharing automatic microphone mixing, ambient noise sensing and level adjustment, autolevelers, compressors, matrix duckers, limiters, frequency-keyed noise gates, and signal delay up to 1,365ms on every channel. You also have the choice of sinewave, pink or white noise generators.
Programming is accomplished using standard 10/100 Ethernet or RS-232 protocol and Protea ne Software on a PC platform. The hot-plug software control allows you to plug any function into any channel block even when running live audio with no recompiling necessary. Automatic DHCP network IP configuration reduces network set up time.
The ne8800 model is designed with multi-level software security with password access, ensuring a tamper-proof audio system. The digital signal processor unit is an analog line input/output with four option bays for supporting Cobranet or Dante network audio, AES/EBU, and mic input options. The processor consists of eight inputs and eight outputs, using fixed-path architecture with hot-plugable audio functions anywhere in the signal path to reduce set-up time.
The Ashly ne8800 Network Enabled Protea DSP Audio System Processor is a sophisticated, professional-grade solution for all your audio processing needs.
https://ashly.com/warranty-information
800-828-6308