


See Options
2 Year
$219.99
3 Year
$349.99
5 Year
$689.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
4
For Max Output Power: Measured in Watts Per Channel, Low Impedance Output Mode, All Channels Driven at Rated Load: 2 Ohms: 150 W
4 Ohms: 150W
8 Ohms: 150 W
For Low Impedance Output Mode: Bridge Output, Measured in Watts, All Channels Driven at Rated Load:
4 Ohms: 300 W
8 Ohms: 300 W
Sleep Mode: less than 1 W
Standby Mode: 25W
Idle (No Signal): 53W
1/8 Max Power @ 2 Ohms: 230W
For 120 VAC
Sleep Mode: 94mA
Standby Mode: 0.27
Idle (No Signal): 0.50
Typical: 2.2
Thermal Dissipation: Sleep Mode: 2.14
Standby Mode: 86.4
Idle (no signal): 180
1/8 Max Power @ 2 Ohms: 505
Selectable at 26dB, 32dB, 38dB, or 1.4V
>250 (8 Ohms load <1kHz)
80Hz 2nd order
<0.5%
<0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)
-75dB (dB from full output, 1kHz)
>99dB
20Hz-20kHz, +/-0.05dB
Euroblock 3.5mm
10k Ohms
+21dBu
Euroblock 7.62mm
RJ-45 connector, 100MB Ethernet
Balanced Euroblock 3.5mm
+21dBu
Euroblock 3.5mm, close contact pin to ground (G) for standby mode
Euroblock 3.5mm, close contact to ground (G) for preset 1-4 recall
Euroblock 3.5mm - Gnd, +18V, Data Out, Data In
Euroblock 3.5mm - fault indicated by loss of 1Hz "heartbeat" pulse signal
Euroblock 3.5mm - Gnd, CV, V+ per input
Rear panel, software, offset link group, remote control. Fully off = Mute
Shorted output power limiting, over-tem-perature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
Continuously variable temperature controlled fan
32-120 Degree F (0-49 Degree C) (noncondensing)
POWER (white): Switch: On, Off, Standby (flashing)
PROTECT (red): On (fault condition or shut down), Off
SLEEP (blue): On, amplifier is asleep from audio inactivity
DISABLE (yellow): On, power switch & attenuators are disabled
COM (green): On, for Ethernet data or Device ID
CLIP/MUTE (red): Clip at 1dB below rated output / Mute
SIGNAL (green): -18dB below rated output
CURRENT (green): Brightness is proportional to output current
TEMP (yellow): On dim at 90% max operating temperature, On full bright + protect at 100%
Per Channel Pair, On, Off
110 - 240VAC
70-270VAC
70VAC
SMPS with active PFC (Power Factor Correction)
Detachable Nema 5-15 for USA(May vary for export)
Analog, Auto (optional Network, AES3)
-20dBu to +20dBu
infinity
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
-20dBu to +20dBu
1.2:1 to infinity
0.2 to 50ms
5ms/dB to 1000ms/dB
Peak/Average
2 available
In, Out, Attenuation, Graphical
-40dBu to +20dBu
Gentle, normal, aggressive, user-defined
0dB to +22dB
Input, Gain, Attenuation
1.2:1 to 10:1
-30dB to 0dB
5ms/dB to 1000ms/dB
0-6 sec
-20dB to +20dB
-40dB to -1dB
0.2s/dB to 20s/dB
16 available
1-2 or 1-4
-40dBu to +20dBu
0.3:1 to 3:1
Input level, Attenuation, Average noise
-80dBu to +20 dBu
5ms/dB to 1000ms/dB
0dB to -30dB, infinity
Yes
Input
-80dBu to +20dBu
off, 100dB to 0dB
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
Key Signal, Gate LED, Graphical
Yes
20Hz to 20kHz
0.016 to 3.995 Octave
-50dB to +12dB, off, polarity invert
4 available
Enable per channel, 0dB to infinity
0 to -50dB, Mute
.CSV, .FIR (input FBS is disabled on channel using output FIR)
Constant Q or Proportional
0.499oct to 0.25oct
20-20kHz
-30dB to +15dB
92.436 to 0.267
20Hz-20kHz
-15dB to +15dB
20Hz-20kHz
20Hz-20kHz
3.047 to 0.267
20Hz-20kHz
92.436 to 0.267
12
Yes
Yes
Float, Restricted, Manual
Notch, Parametric
20Hz to 20kHz
Infinity
+15dB to -30dB
0.016 to 3.995 Octave
5 levels
5 min to 24 hours
12/18/24/48 dB/oct
12/24/48 dB/oct
Off, 20Hz-20KHz
0-21ms
0-682ms
0-10.6ms
0-341ms
-60dBu to +20dBu
1dB
Yes
Off, -50dBu to +20dBu
20Hz-12kHz
Off, -50dB to +12dB
Per channel
Per channel
0.01sec to 2sec
Yes
Per channel if enabled
Level, auto-mixer level
24 bit
32-bit floating point
48kHz, 96kHz
1.42ms
0.71ms
19 x 1.75 x 14.54" (483 x 45 x 369mm)
13.1 lb (5.9kg)
An advanced and powerful solution for your audio needs, the NXP1504 4-Channel Networkable Multi-Mode Power Amplifier with Protea DSP and OPDante Option Card is designed to excel in demanding live sound environments and fixed audio installations. Whether you're outfitting performance venues, stadiums, arenas, convention centers, schools, storefronts, or worship spaces, this high-quality amplifier is a reliable choice.
The NXP1504 is part of the NX series, available in 2 or 4-channel models, and comes in three variations: NX (base model series), NXE (network-able), and NXP (networkable + DSP). It offers Ethernet Control using Protea NE software and serial data control by Ashly programmable remotes or third-party controllers.
This durable amplifier features a real-time clock with an event scheduler for automatic execution of selected functions and tasks, programmed using PneS software and stored in the amplifier. You can also control it remotely via the Ashly Remote free app for custom design of secure wireless control over a network.
The NXP1504 utilizes Class-D Switching Amplifier Technology and features a switch-mode power supply that automatically detects 110 - 120VAC or 220 - 240VAC operation, making it one of the lightest in its class. It offers selectable outputs on each channel, allowing you to choose the desired output mode. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) and you're ready to go.
The NXP1504 is energy efficient, featuring Ashly EMS (Energy Management System) which provides an automatic sleep-mode drawing less than 1 Watt (defeatable). It also has multiple internal power supplies for increased channel separation and reliability.
This 4-channel multi-mode amplifier is capable of driving 2 Ohm loads at full power, with a maximum rated output power of 150W per channel at Low Z, 25V mode, 70V mode, and 100V mode. It features 32-bit DSP processing at 48kHz or 96kHz sampling rate, offering functions such as swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator.
The NXP1504 is compatible with Microsoft Windows 10, 8, 7 (Vista/XP) 32 & 64 bit systems, making it a versatile addition to your audio equipment. With its advanced features and high-quality performance, the NXP1504 4-Channel Networkable Multi-Mode Power Amplifier with Protea DSP and OPDante Option Card is a powerful tool for any audio professional.
https://ashly.com/warranty-information
800-828-6308