


See Options
2 Year
$299.99
3 Year
$449.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
2
For Max Output Power: Measured in Watts, Per Channel, Low Impedance Output, All Channels Driven:
2 Ohms: 1500 W
4 Ohms: 1500W
8 Ohms: 1250 W
For Low Impedance Output: Measured in Watts, Bridge Mode, All Channels Driven
4 Ohms: 3000 W
8 Ohms: 3000 W
Sleep Mode: less than 1 W
Standby Mode: 40W
Idle (No Signal): 55W
For 120 VAC
Sleep Mode: 0.1
Standby Mode: 0.70
Idle (No Signal): 1.00
Typical: 8.0
Thermal Dissipation: Sleep Mode: <3.4 BTU/hr
Standby Mode: 136 BTU/hr
Idle (no signal): 187 BTU/hr
Typical (1 / 8 Max Power): 850 BTU/hr
Selectable at 26dB, 32dB, 38dB, or 1.4V
>250 (8 Ohms load <1kHz)
80Hz 2nd order
<0.5%
<0.5% (8 Ohms, 10dB below rated power, 20Hz-20kHz)
-75dB (dB from full output, 1kHz)
>111dB
20Hz-20kHz, +/-0.05dB
Euroblock 3.5mm, 1/4" TRS and XLR Combo jack
10k Ohms
+21dBu
Neutral speakON
Compatible with standard 100MB Ethernet
Balanced Euroblock 3.5mm
+21dBu
Euroblock 3.5mm, close contact to GND for standby mode
Euroblock 3.5mm, close contact to GND for preset 1-4 recall
Euroblock 3.5mm - Gnd, +18V, In, Out
Fault indicated by loss of 1Hz "heartbeat" pulse signal
Euroblock 3.5mm - Gnd, CV, V+ per input
Front panel, software, offset link group and remote. Fully off = Mute
Inrush current limitation, temperature monitoring, output over-power protection, mains fuses
Continuously variable temperature controlled axial fan(s)
32-113 deg F, (0-45 deg, C) (noncondensing)
POWER (white): Switch: On, Off, Standby (flashing)
PROTECT (red): On (fault condition or shut down), Off
SLEEP (blue): On, amplifier is asleep from audio inactivity
DISABLE (yellow): On, power switch & attenuators are disabled
COM (green): On, for Ethernet data or Device ID
Per Channel CLIP/MUTE (red): Clip at 1dB below rated output / Mute
SIGNAL (green): -18dB below rated output
CURRENT (green): Brightness is proportional to output current
TEMP (yellow): On dim at 90% max operating temperature, On full bright + protect at 100%
BRIDGE (green): On, Off
110 - 120VAC
220 - 240VAC (Automatic Sensing SMPS)
70-135VAC at 50Hz
140-270VAC at 60Hz
85VAC at 50Hz
170VAC at 60Hz
20A powerCON
Analog, Auto (Net, AES3, Analog)
-20dBu to +20dBu
infinity
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
-20dBu to +20dBu
1.2:1 to infinity
0.2 to 50ms
5ms/dB to 1000ms/dB
Peak/Average
2 available
In, Out, Attenuation, Graphical
-40dBu to +20dBu
Gentle, normal, aggressive, user-defined
0dB to +22dB
Input, Gain, Attenuation
1.2:1 to 10:1
-30dB to 0dB
5ms/dB to 1000ms/dB
0-6 sec
-20dB to +20dB
-40dB to -1dB
0.2s/dB to 20s/dB
16 available
1-2 or 1-4
-40dBu to +20dBu
0.3:1 to 3:1
Input level, Attenuation, Average noise
-80dBu to +20 dBu
5ms/dB to 1000ms/dB
0dB to -30dB, infinity
Yes
Input
-80dBu to +20dBu
off, 100dB to 0dB
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
Key Signal, Gate LED, Graphical
Yes
20Hz to 20kHz
0.016 to 3.995 Octave
-50dB to +12dB, off, polarity invert
4 available
Enable per channel, 0dB to infinity
0 to -50dB, Mute
.csv, .fir
Constant Q or Proportional
0.499oct to 0.25oct
20-20kHz
-30dB to +15dB
0.016 to 3.995 Octave
20Hz-20kHz
-15dB to +15dB
20Hz-20kHz
20Hz-20kHz
3.047 to 0.267
20Hz-20kHz
92.436 to 0.267
12
Yes
Yes
Float, Restricted, Manual
Notch, Parametric
20Hz to 20kHz
Infinity
+15dB to -30dB
0.016 to 3.995 Octave
5 levels
5 min to 24 hours
12/18/24/48 dB/oct
12/24/48 dB/oct
Off, 20Hz-20KHz
0-21ms
0-682ms
0-10.6ms
0-341ms
-60dBu to +20dBu
1dB
Yes
Off, -50dBu to +20dBu
20Hz-12kHz
Off, -50dB to +12dB
Per channel
Per channel
0.01sec to 2sec
Yes
Per channel if enabled
Level, auto-mixer level
24 bit
32-bit floating point
48kHz, 96kHz
1.42ms
0.71ms
19 x 3.5 x 16.84" (482.6 x 88.9 x 427.73mm)
22.7 lb (10.3kg)
Discover the power and versatility of the NXP1.52 2-Channel Networkable Multi-Mode Power Amplifier with Protea DSP and OPDante Option Card. This advanced amplifier is designed to meet the rigorous demands of live sound environments and fixed audio installations, making it an ideal choice for performance venues, stadiums, arenas, convention centers, schools, storefronts, and worship spaces.
The NXP1.52 is part of the NX series, which includes the base model series (NX), the networkable series (NXE), and the networkable series with DSP (NXP). This model stands out for its Ethernet Control using Protea NE software, allowing for seamless integration into your audio network. It also offers serial data control by Ashly programmable remotes or third-party controllers, providing you with flexibility and control.
This high-quality amplifier features 32-bit SHARC DSP Processing at 48kHz or 96kHz Sample Rates, offering comprehensive software control of digital signal processing, matrix and auto-mixing. It also includes a built-in signal generator for test tone and noise-masking, swept output load impedance monitoring, and Ashly Remote iPad control for selecting DSP functions such as gain, mute, matrix, A/B source select, PEQ filter level, and meters.
The NXP1.52 is FIR Filter-Ready, meaning it can load a speaker manufacturer's .fir or .csv file to achieve precision tuning. It also boasts Class-D Switching Amplifier Technology, featuring a switch-mode power supply that automatically detects 110 - 120VAC or 220 - 240VAC operation. This makes the NXP1.52 one of the lightest and most efficient amplifiers in its class.
The amplifier offers Multi-Mode Operation with Selectable Outputs on each channel, allowing you to choose your desired output mode. Set the DIP-switch configuration for Low Impedance (2, 4, and 8 Ohm), or Constant Voltage (70V or 100V) for maximum flexibility. The NXP1.52 also features Ashly EMS (Energy Management System), which provides an automatic sleep-mode drawing less than 1 Watt, enhancing its energy efficiency.
Experience the power of the NXP1.52, a 2-channel multi-mode amplifier capable of driving 2 Ohm loads at full power, with a maximum rated output power of 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. It also offers an automatic but defeatable sleep mode, selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V.
The NXP1.52 is equipped with Neutral XLR/TRS combo jack and Euroblock input connectors, and Neutral speakON output connectors. It also features a front panel power switch and level controls that can be disabled, and LEDs that indicate various statuses such as Protect, Sleep, Disabled, Com, and Bridge mode, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel.
With the NXP1.52, you get more than just a powerful amplifier. You get a durable, efficient, and advanced piece of equipment that's ready to take your audio experience to the next level.
https://ashly.com/warranty-information
800-828-6308