
See Options
2 Year
$499.99
3 Year
$649.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
4
70V (per channel): 125W; 20Hz-20kHz, 1% THD, All Channels Driven
190mA
590mA
1.70A (1/8 Max Power, Pink Noise, All Channels Driven)
3.27A (1/3 power pink noise)
46.7 BTU/hr
123 BTU/hr
232 BTU/hr (1/8 Max power, pink noise, All Channels Driven)
251 BTU/hr(1/3 Max power, sine Wave, All Channels Driven)
>102dB (20Hz-20kHz, Unweighted)
7.2dBu
32dB
>250 (8 Ohm load, <1kHz)
<0.5% (SMPTE, typical)
<0.5% (THD-N, typical, 8 Ohm, 10dB below rated power, 20Hz-20kHz)
-80dB (dB from full output, 1kHz)
20Hz-20kHz, +/-1dB
4.8k Ohms
+21dBu
0, +20dB, +40dB, +60dB
+15V, switchable Channel 1-4, 5-8
3.16k Ohm (Input Impedance)
+11dBu (Maximum Input Level)
3.9k Ohm (Input Impedance)
+21dBu (Maximum Input Level)
+8dBu
+20dBu
Ethernet 10/100, Channel 1 TEL-PBX Switch, Remote Standby, Preset Recall (4), Remote Level (8), Remote Data
Input: Euroblock
Output: Euroblock
Power: Switch: On, Off (Blue)
Standby: Standby, flashing (Yellow)
Protect: On, Off (Red)
Disable: On, Off (Yellow)
COM: On, for Ethernet data or Device ID (Green)
Signal level: Clip/Mute (Red); -6dB (Yellow) and -18dB, -12dB (Green)
Bridge: Per Channel Pair (Green)
Temp: Per Channel (Yellow)
Current: Per Channel: Proportional to output (Green)
1 Euro connector balanced input, selectable for Mic, Line or TEL-PBX
7 Euro connector balanced inputs, software selectable for Mic or Line
8 pairs of unbalanced, summed mono RCA connectors optimized for consumer line level (-10dBu) devices
8 Euro connector Preamp/Aux outputs
4 or 8 Euro connector speaker outputs
CobraNet Digital I/O options
120VAC or 240VAC, +/-10% 50-60Hz
15A Edison, 3-Prong IEC
40 to 120 degree F (4 to 49 degree C) noncondensing
Analog, Auto (Net, AES3, Analog)
-20dBu to +20dBu
infinity
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
-20dBu to +20dBu
1.2:1 to infinity
0.2 to 50ms
5ms/dB to 1000ms/dB
Peak/Average
2 available
In, Out, Attenuation, Graphical
-40dBu to +20dBu
Gentle, normal, aggressive, user-defined
0dB to +22dB
Input Level, Gain, Attenuation
1.2:1 to 10:1
-30dB to 0dB
5ms/dB to 1000ms/dB
0-6 sec
-20dB to +20dB
-40dB to -1dB
0.2s/dB to 20s/dB
16 available
1-4 or 1-8
-40dBu to +20dBu
0.3:1 to 3:1
Input level, Attenuation, Average noise
-80dBu to +20 dBu
5ms/dB to 1000ms/dB
0dB to -30dB, infinity
Yes
Input
-80dBu to +20dBu
off, 100dB to 0dB
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
Key Signal, Gate LED, Graphical
Yes
20Hz to 20kHz
0.016 to 3.995 Octave
-50dB to +12dB, off, polarity invert
4 available
Enable per channel, 0dB to infinity
0 to -50dB, Mute
Constant Q or Proportional
0.499oct to 0.25oct
20-20kHz
-30dB to +15dB
0.016 to 3.995 Octave
20Hz-20kHz
-15dB to +15dB
20Hz-20kHz
20Hz-20kHz
3.047 to 0.267
20Hz-20kHz
92.436 to 0.267
12
Yes
Yes
Float, Restricted, Manual
Notch, Parametric
20Hz to 20kHz
Infinity
+15dB to -30dB
0.016 to 3.995 Octave
5 levels
5 min to 24 hours
12/18/24/48 dB/oct
12/24/48 dB/oct
Off, 20Hz-20KHz
0-21ms
0-682ms
0-10.6ms
0-341ms
-60dBu to +20dBu
1dB
Yes
Off, -50dBu to +20dBu
20Hz-12kHz
Off, -50dB to +12dB
Per channel
Per channel
0.01sec to 2sec
Yes
Per channel if enabled
Level, auto-mixer level
24 bit
32-bit floating point
48kHz, 96kHz
1.42ms
0.71ms
19 x 3.5 x 15.5" (483 x 89 x 394mm)
18.5 lb (8.4kg)
Are you looking for a powerful and advanced solution for your network audio amplification needs The PEMA 4125.70 4-Channel Amplifier with Protea DSP and CNM-2 CobraNet Option Card is a high-quality, reliable, and durable choice that sets a new industry standard for value-engineered zone sound systems.
This sophisticated unit combines open-architecture DSP functionality with high-performance amplifier capabilities within a compact two-rack space design. It not only reduces overall system cost but also enhances energy efficiency, streamlines installation, and simplifies programming. Whether you opt for the four or eight-channel version, each channel delivers either 125 or 250 Watts, ensuring powerful sound reinforcement with minimal distortion.
Experience crystal-clear audio thanks to the full 96kHz performance on 32-bit SHARC processors. The PEMA 4125.70 is designed to revolutionize sound system design, offering an all-in-one solution that requires minimal cabling and rack space, and significantly reduces installation time.
The built-in DSP algorithms include ambient noise compensation, advanced automatic feedback suppression, and automatic mixing, along with a comprehensive array of filters, EQs, delays, and more. The amplifier's DSP control extends to bridge-mode operation, HPF settings for constant voltage systems, stereo-linking of channel pairs, and MIC/LINE/TEL-PAGE functions on channel 1, providing full control over ducking priorities and remote-gain capabilities.
With eight balanced input channels, software-selectable for mic or line levels, and the first channel also set for transformer isolated TEL-PBX level, the PEMA 4125.70 is ideal for small to mid-sized installations. Eight pairs of summed-mono RCA connectors are optimized for consumer line-level devices, and eight preamp auxiliary outputs allow for flexible signal routing.
Programming and deployment are made remarkably easy with the Protea ne Software, compatible with standard 10/100 Ethernet protocol and accessible via a PC platform. Hot-plug DSP placement and automatic DHCP network IP configuration streamline the setup process, while lockable front panel controls and multi-level software security with password access ensure a secure audio system.
The PEMA 4125.70's comprehensive input and output processing capabilities, including individual mute functions and configurable processing blocks, make it a versatile and indispensable component of any professional audio setup. LED indicators provide at-a-glance monitoring of signal levels, system status, and performance.
Designed to fit seamlessly into a standard 19" rack, the PEMA 4125.70 occupies only two rack spaces and weighs a manageable 18.5 lbs. With the option for Cobranet and Dante factory integration, this amplifier is ready to meet the demands of modern audio networking.
Choose the Ashly PEMA 4125.70 Protea Equipped Media Amplifier for a solution that combines intuitive design with robust functionality, ensuring your audio system operates at peak performance.
https://ashly.com/warranty-information
800-828-6308