
See Options
2 Year
$219.99
3 Year
$349.99
5 Year
$689.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
4
100V (per channel): 125W; 20Hz-20kHz, 1% THD, All Channels Driven
190mA
590mA
1.70A (1/8 power pink noise)
3.27A (1/3 power pink noise)
46.7 BTU/hr
123 BTU/hr
232 BTU/hr (1/8 power pink noise)
251 BTU/hr(1/3 power pink noise)
>102dB (20Hz-20kHz, Unweighted)
7.2dBu
35dB
>250 (8 Ohm load, <1kHz)
<0.5% (SMPTE, typical)
<0.5% (THD-N, typical, 8 Ohm, 10dB below rated power, 20Hz-20kHz)
-80dB (dB from full output, 1kHz)
20Hz-20kHz, +/-1dB
4.8k Ohms
+21dBu
0, +20dB, +40dB, +60dB
+15V, switchable Channel 1-4, 5-8
3.16k Ohm (Input Impedance)
+11dBu (Maximum Input Level)
3.9k Ohm (Input Impedance)
+21dBu (Maximum Input Level)
+8dBu
+20dBu
Ethernet 10/100, Channel 1 TEL-PBX Switch, Remote Standby, Preset Recall (4), Remote Level (8), Remote Data
Input: Euroblock
Output: Euroblock
Power: Switch: On, Off (Blue)
Standby: Standby, flashing (Yellow)
Protect: On, Off (Red)
Disable: On, Off (Yellow)
COM: On, for Ethernet data or Device ID (Green)
Signal level: Clip/Mute (Red); -6dB (Yellow) and -18dB, -12dB (Green)
Bridge: Per Channel Pair (Green)
Temp: Per Channel (Yellow)
Current: Per Channel: Proportional to output (Green)
1 Euro connector balanced input, selectable for Mic, Line or TEL-PBX
7 Euro connector balanced inputs, software selectable for Mic or Line
8 pairs of unbalanced, summed mono RCA connectors optimized for consumer line level (-10dBV nominal) devices
8 Euro connector Preamp/Aux outputs
4 Euro connector speaker outputs
CobraNet and Dante Digital I/O options
120VAC or 240VAC, +/-10% 50-60Hz
15A Edison, 3-Prong IEC
IN through sides, OUT through front
40 to 120 deg. F (4 to 49 deg. C) noncondensing
Analog, Auto (Net, AES3, Analog)
-20dBu to +20dBu
Infinite
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
-20dBu to +20dBu
1.2:1 to infinite
0.2 to 50ms
5ms/dB to 1000ms/dB
Peak/Average
2 available
In, Out, Attenuation, Graphical
-40dBu to +20dBu
Gentle, normal, aggressive, user defined
0dB to +22dB
Input, Gain, Attenuation
1.2:1 to 10:1
-30dB to 0dB
5ms/dB to 1000ms/dB (Increase/Decrease Rate)
0-6 sec
-20dB to +20dB
-40dB to +20dB
0.2s/dB to 20s/dB
16 available
1-4 or 1-8
-40dBu to +20dBu
0.3:1 to 3:1
Input level, Attenuation, Average noise
-80dBu to +20 dBu
5ms/dB to 1000ms/dB
0dB to -30dB, infinity
Yes
Input
-80dBu to +20dBu
Off, 100dB to 0dB
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
Key Signal, Gate LED, Graphical
Yes
20Hz to 20kHz
0.016 to 3.995 Octave
-50dB to +12dB, off, polarity invert
4 available
Enable per channel, 0dB to infinity
0 to -50dB, Mute
.csv, .fir (Output only, 48kHz only, 2-384 Taps)
Constant Q or proportional
0.499oct to 0.25oct
Frequency: 20-20kHz
Level: -30dB to +15dB
Q Value: 0.016 to 3.995 Octave
Frequency: 20Hz-20kHz
Level: -15dB to +15dB
Frequency: 20Hz-20kHz
Frequency: 20Hz-20kHz
Q Value: 3.047 to 0.267
Frequency: 20Hz-20kHz
Q Value: 92.436 to 0.267
12
Yes
Yes
Float, Restricted, Manual
Notch, Parametric
Range 20Hz to 20kHz
Infinity
+15dB to -30dB
0.016 to 3.995 Octave
5 levels
5 minutes to 24 hours
Bessel & Butterworth Filters: 12/18/24/48 dB/oct
Linkwitz-Riley Filter: 12/24/48 dB/oct
Frequency: Off, 20Hz-20KHz
0-21ms (Input Time, Distance & Temperature)
0-682ms (Input Time, Distance & Temperature)
0-10.6ms (Input Time, Distance & Temperature)
0-341ms (Input Time, Distance & Temperature)
-60dBu to +20dBu
1dB
Yes
Off, -50dBu to +20dBu
20Hz-12kHz
Off, -50 to +12dB
Per channel
Per channel
0.01sec to 2sec
Yes
Per channel, if enabled
Level, auto-mixer level
24 bit
32-bit floating point
48kHz, 96kHz
1.42ms
0.71ms
19 x 3.5 x 16.84" (48.26 x 8.89 x 42.77cm)
23.5 lbs (10.66kg)
Why choose the PEMA Series Four-Channel 125W 100V Protea-Equipped Media Amplifier This advanced media amplifier is the epitome of powerful, high-quality audio performance and efficiency, designed for the discerning professional in audio and video applications. The PEMA Series stands out with its built-in digital signal processor (DSP), offering unparalleled control and customization of sound, ensuring crystal-clear audio reproduction that meets the rigorous demands of professional environments.
The PEMA Series amplifier is a testament to innovation, integrating open-architecture DSP with robust amplifier performance within a compact two-rack space unit. This design not only reduces system costs but also maximizes space efficiency, enhances energy conservation, and streamlines both installation and programming processes. Available in both four and eight-channel configurations, with options of 125 and 250 Watts per channel, this amplifier is versatile enough to suit a wide array of sound system designs.
Experience full 96kHz performance with 32-bit SHARC processors for audio that is transparent and true to the original source. The PEMA Series supports both CobraNet and Dante network audio protocols, with the added convenience of Dante Transmit now available, making it a future-proof investment for network-controlled audio systems.
The amplifier boasts an array of sophisticated features, including FIR Filter capability, an 8-in x 4-out matrix mixer, and eight built-in microphone preamps. Gain sharing automatic microphone mixing (Automixer), automatic feedback suppression, and ambient noise compensation are just a few of the advanced functionalities that ensure your audio output is consistently of the highest quality.
With dedicated inputs for telephone/PBX systems, dual RCA, and balanced euroblock inputs, as well as post-DSP AUX line-level outputs, the PEMA Series offers extensive connectivity options. The amplifier also features event scheduling, adjustable high-pass and low-pass filters, and a built-in generator for pink/white noise and sine waves, providing comprehensive control over your audio environment.
The full suite of Ashly Protea DSP tools, hot-plug DSP placement, and a 96kHz or 48kHz sample rate with 32-Bit SHARC DSP processing power, ensure that your audio is processed with precision. The 24-Bit A/D-D/A audio resolution and 15V phantom power for microphone inputs further enhance the quality and versatility of this amplifier.
Control and configuration are made effortless with Ashly's intuitive software, accessible over a 10/100 baseT Ethernet connection. The user interface is designed for ease of use, with automatic DHCP network IP configuration and multi-level security features that ensure a secure, tamper-proof audio system.
The PEMA Series Four-Channel 125W 100V Protea-Equipped Media Amplifier changes the landscape of sound system design, offering an elegant, streamlined solution that impresses with its simplicity, sophistication, and reliability. Whether for small or mid-sized installations, this amplifier delivers exceptional performance and control, making it the preferred choice for audio professionals seeking a powerful and efficient media amplification solution.
https://ashly.com/warranty-information
800-828-6308