
See Options
2 Year
$299.99
3 Year
$449.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
4
100V (per channel): 250W; 20Hz-20kHz, 1% THD, All Channels Driven
190mA
540mA
2.85A (1/8 power pink noise)
6.00A (1/3 power pink noise)
46.7 BTU/hr
123 BTU/hr
341 BTU/hr (1/8 power pink noise)
378 BTU/hr(1/3 power pink noise)
>105dB (20Hz-20kHz, Unweighted)
7.2dBu
35dB
>250 (8 Ohm load, <1kHz)
<0.5% (SMPTE, typical)
<0.5% (THD-N, typical, 8 Ohm, 10dB below rated power, 20Hz-20kHz)
-80dB (dB from full output, 1kHz)
20Hz-20kHz, +/-1dB
4.8k Ohms
+21dBu
0, +20dB, +40dB, +60dB
+15V, switchable Channel 1-4, 5-8
3.16k Ohm (Input Impedance)
+11dBu (Maximum Input Level)
3.9k Ohm (Input Impedance)
+21dBu (Maximum Input Level)
+8dBu
+20dBu
Ethernet 10/100, Channel 1 TEL-PBX Switch, Remote Standby, Preset Recall (4), Remote Level (8), Remote Data
Input: Euroblock
Output: Euroblock
Power: Switch: On, Off (Blue)
Standby: Standby, flashing (Yellow)
Protect: On, Off (Red)
Disable: On, Off (Yellow)
COM: On, for Ethernet data or Device ID (Green)
Signal level: Clip/Mute (Red); -6dB (Yellow) and -18dB, -12dB (Green)
Bridge: Per Channel Pair (Green)
Temp: Per Channel (Yellow)
Current: Per Channel: Proportional to output (Green)
1 Euro connector balanced input, selectable for Mic, Line or TEL-PBX
7 Euro connector balanced inputs, software selectable for Mic or Line
8 pairs of unbalanced, summed mono RCA connectors optimized for consumer line level (-10dBV nominal) devices
8 Euro connector Preamp/Aux outputs
4 Euro connector speaker outputs
CobraNet and Dante Digital I/O options
120VAC or 240VAC, +/-10% 50-60Hz
15A Edison, 3-Prong IEC
IN through sides, OUT through front
40 to 120 deg. F (4 to 49 deg. C) noncondensing
Analog, Auto (Net, AES3, Analog)
-20dBu to +20dBu
Infinite
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
-20dBu to +20dBu
1.2:1 to infinite
0.2 to 50ms
5ms/dB to 1000ms/dB
Peak/Average
2 available
In, Out, Attenuation, Graphical
-40dBu to +20dBu
Gentle, normal, aggressive, user defined
0dB to +22dB
Input, Gain, Attenuation
1.2:1 to 10:1
-30dB to 0dB
5ms/dB to 1000ms/dB (Increase/Decrease Rate)
0-6 sec
-20dB to +20dB
-40dB to +20dB
0.2s/dB to 20s/dB
16 available
1-4 or 1-8
-40dBu to +20dBu
0.3:1 to 3:1
Input level, Attenuation, Average noise
-80dBu to +20 dBu
5ms/dB to 1000ms/dB
0dB to -30dB, infinity
Yes
Input
-80dBu to +20dBu
Off, 100dB to 0dB
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
Key Signal, Gate LED, Graphical
Yes
20Hz to 20kHz
0.016 to 3.995 Octave
-50dB to +12dB, off, polarity invert
4 available
Enable per channel, 0dB to infinity
0 to -50dB, Mute
.csv, .fir (Output only, 48kHz only, 2-384 Taps)
Constant Q or proportional
0.499oct to 0.25oct
Frequency: 20-20kHz
Level: -30dB to +15dB
Q Value: 0.016 to 3.995 Octave
Frequency: 20Hz-20kHz
Level: -15dB to +15dB
Frequency: 20Hz-20kHz
Frequency: 20Hz-20kHz
Q Value: 3.047 to 0.267
Frequency: 20Hz-20kHz
Q Value: 92.436 to 0.267
12
Yes
Yes
Float, Restricted, Manual
Notch, Parametric
Range 20Hz to 20kHz
Infinity
+15dB to -30dB
0.016 to 3.995 Octave
5 levels
5 minutes to 24 hours
Bessel & Butterworth Filters: 12/18/24/48 dB/oct
Linkwitz-Riley Filter: 12/24/48 dB/oct
Frequency: Off, 20Hz-20KHz
0-21ms (Input Time, Distance & Temperature)
0-682ms (Input Time, Distance & Temperature)
0-10.6ms (Input Time, Distance & Temperature)
0-341ms (Input Time, Distance & Temperature)
-60dBu to +20dBu
1dB
Yes
Off, -50dBu to +20dBu
20Hz-12kHz
Off, -50 to +12dB
Per channel
Per channel
0.01sec to 2sec
Yes
Per channel, if enabled
Level, auto-mixer level
24 bit
32-bit floating point
48kHz, 96kHz
1.42ms
0.71ms
19 x 3.5 x 16.84" (48.26 x 8.89 x 42.77cm)
23.5 lbs (10.66kg)
Explore the pinnacle of audio amplification with the PEMA Series Four-Channel 250W 100V Protea-Equipped Media Amplifier, a state-of-the-art solution designed for the discerning audio professional. This advanced media amplifier sets a new industry standard, offering a powerful and high-quality audio experience within a compact two-rack space unit.
The PEMA Series is engineered to deliver unparalleled sound quality with full 96kHz performance on 32-bit SHARC processors, ensuring utterly transparent audio that satisfies even the most critical listeners. With the inclusion of CobraNet and Dante network audio support, and now with Dante Transmit, this amplifier is at the forefront of digital audio networking, allowing for seamless integration into modern sound systems.
The amplifier's built-in DSP is a testament to its advanced capabilities, providing users with a sophisticated 8-in x 4-out matrix mixing, FIR filter capabilities, and a full suite of Ashly Protea DSP tools. The 8 built-in mic preamps, gain sharing automatic microphone mixing, and automatic feedback suppression are just a few features that make this amplifier efficient and versatile for various audio environments.
Efficiency is further enhanced with features like ambient noise compensation, dedicated telephone/PBX input, and dual RCA and balanced euroblock inputs. Post DSP AUX line level outputs, stereo summed to mono, and event scheduling capabilities add to the flexibility of this robust system.
The PEMA Series is not only powerful but also user-friendly, with an intuitive interface that simplifies system installation and programming. It offers full control using Ashly software over a 10/100 baseT Ethernet connection, making it easy to adjust settings from a remote location. Hot-plug DSP placement and automatic DHCP network IP configuration streamline the setup process, ensuring a quick and secure integration into any audio system.
Security is paramount, and the PEMA Series addresses this with multi-level security features, including lockable front panel controls and password access to prevent unauthorized adjustments. The amplifier's I/O count and formats are ideal for small to mid-sized installations, with eight balanced input channels that are software selectable for mic or line levels, and eight pairs of summed-mono RCA connectors.
As part of the respected Protea DSP lineage, the PEMA Series amplifier is remarkably easy to program and deploy, offering hot-plug DSP placement and full-range remote-gain control capability. Whether you're controlling the system via Ashly standard wall remotes, Ethernet wall remotes, or the Ashly Remote iPad App, you have the power to tailor the audio experience to your exact specifications.
In summary, the PEMA Series Four-Channel 250W 100V Protea-Equipped Media Amplifier is a durable, efficient, and high-quality choice for professionals seeking an elegant solution that simplifies installation while delivering sophisticated, reliable performance. With its advanced features and powerful DSP, this amplifier is a game-changer in the realm of professional audio amplification.
https://ashly.com/warranty-information
800-828-6308