


See Options
2 Year
$499.99
3 Year
$649.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
8
100V (per channel): 250W; 20Hz-20kHz, 1% THD, All Channels Driven
290mA
565mA
5.0A (1/8 power pink noise)
11.0A (1/3 power pink noise)
63.8 BTU/hr
187 BTU/hr
700 BTU/hr (1/8 power pink noise)
775 BTU/hr(1/3 power pink noise)
>105dB (20Hz-20kHz, Unweighted)
7.2dBu
35dB
>250 (8 Ohm load, <1kHz)
<0.5% (SMPTE, typical)
<0.5% (THD-N, typical, 8 Ohm, 10dB below rated power, 20Hz-20kHz)
-80dB (dB from full output, 1kHz)
20Hz-20kHz, +/-1dB
4.8k Ohms
+21dBu
0, +20dB, +40dB, +60dB
+15V, switchable Channel 1-4, 5-8
3.16k Ohm (Input Impedance)
+11dBu (Maximum Input Level)
3.9k Ohm (Input Impedance)
+21dBu (Maximum Input Level)
+8dBu
+20dBu
Ethernet 10/100, Channel 1 TEL-PBX Switch, Remote Standby, Preset Recall (4), Remote Level (8), Remote Data
Input: Euroblock
Output: Euroblock
Power: Switch: On, Off (Blue)
Standby: Standby, flashing (Yellow)
Protect: On, Off (Red)
Disable: On, Off (Yellow)
COM: On, for Ethernet data or Device ID (Green)
Signal level: Clip/Mute (Red); -6dB (Yellow) and -18dB, -12dB (Green)
Bridge: Per Channel Pair (Green)
Temp: Per Channel (Yellow)
Current: Per Channel: Proportional to output (Green)
1 Euro connector balanced input, selectable for Mic, Line or TEL-PBX
7 Euro connector balanced inputs, software selectable for Mic or Line
8 pairs of unbalanced, summed mono RCA connectors optimized for consumer line level (-10dBV nominal) devices
8 Euro connector Preamp/Aux outputs
8 Euro connector speaker outputs
CobraNet and Dante Digital I/O options
120VAC or 240VAC, +/-10% 50-60Hz
15A Edison, 3-Prong IEC
IN through sides, OUT through front
40 to 120 deg. F (4 to 49 deg. C) noncondensing
Analog, Auto (Net, AES3, Analog)
-20dBu to +20dBu
Infinite
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
-20dBu to +20dBu
1.2:1 to infinite
0.2 to 50ms
5ms/dB to 1000ms/dB
Peak/Average
2 available
In, Out, Attenuation, Graphical
-40dBu to +20dBu
Gentle, normal, aggressive, user defined
0dB to +22dB
Input, Gain, Attenuation
1.2:1 to 10:1
-30dB to 0dB
5ms/dB to 1000ms/dB (Increase/Decrease Rate)
0-6 sec
-20dB to +20dB
-40dB to +20dB
0.2s/dB to 20s/dB
16 available
1-4 or 1-8
-40dBu to +20dBu
0.3:1 to 3:1
Input level, Attenuation, Average noise
-80dBu to +20 dBu
5ms/dB to 1000ms/dB
0dB to -30dB, infinity
Yes
Input
-80dBu to +20dBu
Off, 100dB to 0dB
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
Key Signal, Gate LED, Graphical
Yes
20Hz to 20kHz
0.016 to 3.995 Octave
-50dB to +12dB, off, polarity invert
4 available
Enable per channel, 0dB to infinity
0 to -50dB, Mute
.csv, .fir (Output only, 48kHz only, 2-384 Taps)
Constant Q or proportional
0.499oct to 0.25oct
Frequency: 20-20kHz
Level: -30dB to +15dB
Q Value: 0.016 to 3.995 Octave
Frequency: 20Hz-20kHz
Level: -15dB to +15dB
Frequency: 20Hz-20kHz
Frequency: 20Hz-20kHz
Q Value: 3.047 to 0.267
Frequency: 20Hz-20kHz
Q Value: 92.436 to 0.267
12
Yes
Yes
Float, Restricted, Manual
Notch, Parametric
Range 20Hz to 20kHz
Infinity
+15dB to -30dB
0.016 to 3.995 Octave
5 levels
5 minutes to 24 hours
Bessel & Butterworth Filters: 12/18/24/48 dB/oct
Linkwitz-Riley Filter: 12/24/48 dB/oct
Frequency: Off, 20Hz-20KHz
0-21ms (Input Time, Distance & Temperature)
0-682ms (Input Time, Distance & Temperature)
0-10.6ms (Input Time, Distance & Temperature)
0-341ms (Input Time, Distance & Temperature)
-60dBu to +20dBu
1dB
Yes
Off, -50dBu to +20dBu
20Hz-12kHz
Off, -50 to +12dB
Per channel
Per channel
0.01sec to 2sec
Yes
Per channel, if enabled
Level, auto-mixer level
24 bit
32-bit floating point
48kHz, 96kHz
1.42ms
0.71ms
19 x 3.5 x 16.84" (48.26 x 8.89 x 42.77cm)
25 lbs (11.34kg)
If you're seeking a powerful, high-quality, and advanced media amplifier, look no further than the PEMA Series Eight-Channel 250W 100V Protea-Equipped Media Amplifier. This efficient and durable amplifier is a game-changer in the realm of professional audio equipment, offering unparalleled sound amplification for sound reinforcement systems, live performances, and any application requiring superior audio quality.
This eight-channel amplifier delivers a robust 250 watts per channel into 8 ohms, with a wattage range of 200-299 watts per channel. Its built-in digital signal processor (DSP) provides easy control and customization of sound, making it a standout choice for audio professionals.
The PEMA Series Amplifier is not just powerful, but also smart. It offers network-only control, enabling remote management of your sound system. This feature not only simplifies system installation and programming but also enhances energy efficiency.
This amplifier supports both CobraNet and Dante network audio, with full 96kHz performance on 32-bit SHARC processors for utterly transparent audio. It also boasts a host of advanced features, including FIR filter capability, 8-in x 8-out sophisticated matrix mixing, automatic feedback suppression, ambient noise compensation, and a full suite of Ashly Protea DSP.
The PEMA Series Amplifier is designed with user convenience in mind. It features an easy and intuitive user interface, automatic DHCP network IP configuration, and full control using Ashly software over 10/100 baseT Ethernet. Its hot-plug DSP placement allows users to insert any function into any channel block, even when running live audio.
With the PEMA Series Eight-Channel 250W 100V Protea-Equipped Media Amplifier, you're not just getting a powerful audio amplifier, but a comprehensive solution for your audio needs. Its advanced features and superior performance make it an ideal choice for small to mid-sized installations, delivering an elegant solution with less cabling, less rack space, and less installation time. Experience the difference with the PEMA Series Amplifier, where power, quality, and advanced technology meet.
https://ashly.com/warranty-information
800-828-6308