


See Options
2 Year
$299.99
3 Year
$449.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
8
70V (per channel): 250W; 20Hz-20kHz, 1% THD, All Channels Driven
290mA
565mA
5.0A (1/8 power pink noise)
11.0A (1/3 power pink noise)
63.8 BTU/hr
187 BTU/hr
700 BTU/hr (1/8 power pink noise)
775 BTU/hr(1/3 power pink noise)
>105dB (20Hz-20kHz, Unweighted)
7.2dBu
32dB
>250 (8 Ohm load, <1kHz)
<0.5% (SMPTE, typical)
<0.5% (THD-N, typical, 8 Ohm, 10dB below rated power, 20Hz-20kHz)
-80dB (dB from full output, 1kHz)
20Hz-20kHz, +/-1dB
4.8k Ohms
+21dBu
0, +20dB, +40dB, +60dB
+15V, switchable Channel 1-4, 5-8
3.16k Ohm (Input Impedance)
+11dBu (Maximum Input Level)
3.9k Ohm (Input Impedance)
+21dBu (Maximum Input Level)
+8dBu
+20dBu
Ethernet 10/100, Channel 1 TEL-PBX Switch, Remote Standby, Preset Recall (4), Remote Level (8), Remote Data
Input: Euroblock
Output: Euroblock
Power: Switch: On, Off (Blue)
Standby: Standby, flashing (Yellow)
Protect: On, Off (Red)
Disable: On, Off (Yellow)
COM: On, for Ethernet data or Device ID (Green)
Signal level: Clip/Mute (Red); -6dB (Yellow) and -18dB, -12dB (Green)
Bridge: Per Channel Pair (Green)
Temp: Per Channel (Yellow)
Current: Per Channel: Proportional to output (Green)
1 Euro connector balanced input, selectable for Mic, Line or TEL-PBX
7 Euro connector balanced inputs, software selectable for Mic or Line
8 pairs of unbalanced, summed mono RCA connectors optimized for consumer line level (-10dBV nominal) devices
8 Euro connector Preamp/Aux outputs
8 Euro connector speaker outputs
CobraNet and Dante Digital I/O options
120VAC or 240VAC, +/-10% 50-60Hz
15A Edison, 3-Prong IEC
IN through sides, OUT through front
40 to 120 deg. F (4 to 49 deg. C) noncondensing
Analog, Auto (Net, AES3, Analog)
-20dBu to +20dBu
Infinite
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
-20dBu to +20dBu
1.2:1 to infinite
0.2 to 50ms
5ms/dB to 1000ms/dB
Peak/Average
2 available
In, Out, Attenuation, Graphical
-40dBu to +20dBu
Gentle, normal, aggressive, user defined
0dB to +22dB
Input, Gain, Attenuation
1.2:1 to 10:1
-30dB to 0dB
5ms/dB to 1000ms/dB (Increase/Decrease Rate)
0-6 sec
-20dB to +20dB
-40dB to +20dB
0.2s/dB to 20s/dB
16 available
1-4 or 1-8
-40dBu to +20dBu
0.3:1 to 3:1
Input level, Attenuation, Average noise
-80dBu to +20 dBu
5ms/dB to 1000ms/dB
0dB to -30dB, infinity
Yes
Input
-80dBu to +20dBu
Off, 100dB to 0dB
0.2ms/dB to 50 ms/dB
5ms/dB to 1000ms/dB
Key Signal, Gate LED, Graphical
Yes
20Hz to 20kHz
0.016 to 3.995 Octave
-50dB to +12dB, off, polarity invert
4 available
Enable per channel, 0dB to infinity
0 to -50dB, Mute
.csv, .fir (Output only, 48kHz only, 2-384 Taps)
Constant Q or proportional
0.499oct to 0.25oct
Frequency: 20-20kHz
Level: -30dB to +15dB
Q Value: 0.016 to 3.995 Octave
Frequency: 20Hz-20kHz
Level: -15dB to +15dB
Frequency: 20Hz-20kHz
Frequency: 20Hz-20kHz
Q Value: 3.047 to 0.267
Frequency: 20Hz-20kHz
Q Value: 92.436 to 0.267
12
Yes
Yes
Float, Restricted, Manual
Notch, Parametric
Range 20Hz to 20kHz
Infinity
+15dB to -30dB
0.016 to 3.995 Octave
5 levels
5 minutes to 24 hours
Bessel & Butterworth Filters: 12/18/24/48 dB/oct
Linkwitz-Riley Filter: 12/24/48 dB/oct
Frequency: Off, 20Hz-20KHz
0-21ms (Input Time, Distance & Temperature)
0-682ms (Input Time, Distance & Temperature)
0-10.6ms (Input Time, Distance & Temperature)
0-341ms (Input Time, Distance & Temperature)
-60dBu to +20dBu
1dB
Yes
Off, -50dBu to +20dBu
20Hz-12kHz
Off, -50 to +12dB
Per channel
Per channel
0.01sec to 2sec
Yes
Per channel, if enabled
Level, auto-mixer level
24 bit
32-bit floating point
48kHz, 96kHz
1.42ms
0.71ms
19 x 3.5 x 16.84" (48.26 x 8.89 x 42.77cm)
25 lbs (11.34kg)
Bring your audio and video applications to life with the PEMA Series Eight-Channel 250W 70V Protea-Equipped Media Amplifier. This high-quality, advanced media amplifier is designed to deliver powerful, crystal-clear sound for professional use in large-scale installations such as concerts, theaters, and houses of worship.
Engineered with a built-in digital signal processor (DSP), this efficient and durable amplifier offers easy control and customization of sound. Its network-only control feature allows for remote operation and seamless integration into larger systems, making it a top choice for professionals in the audio industry.
The PEMA Series Amplifier boasts eight channels, each capable of delivering a robust 250 watts into 8 ohms. It can handle a wattage range of 200-299 watts per channel, ensuring consistent, high-quality audio output.
This advanced amplifier is equipped with a host of features designed to enhance your audio experience. It supports CobraNet and Dante network audio, and offers 8-in x 8-out sophisticated matrix mixing, automatic feedback suppression, ambient noise compensation, and a full suite of Ashly Protea DSP.
The PEMA Series Amplifier also features eight built-in mic pre's, gain sharing automatic microphone mixing (Automixer), and dedicated telephone/PBX input. It offers dual RCA and balanced euroblock inputs, post DSP AUX line level outputs, and stereo summed to mono.
With its 32-Bit SHARC DSP and 24-Bit A/D-D/A audio resolution, this amplifier delivers utterly transparent audio. It also features adjustable HP/LP filters, a built-in pink/white noise & sine wave generator, and full control using Ashly software over 10/100 baseT Ethernet.
The PEMA Series Amplifier is not just a powerful audio tool, but also a model of efficiency and simplicity. It requires less cabling, less rack space, and less installation time, making it an elegant solution for your audio needs.
Experience the difference with the PEMA Series Eight-Channel 250W 70V Protea-Equipped Media Amplifier, a product that truly sets a new industry benchmark for value-engineered zone sound systems.
https://ashly.com/warranty-information
800-828-6308