
Review Summary
Dual independent receivers, automatic-switching diversity
Band D 655.500-680.375 MHz
996 total per band (25 kHz increments)
+/-0.005%, Phase Lock Loop frequency control
FM
+/-5 kHz
300' typical
70 Hz to 15 kHz
115 dB at 40 kHz deviation (IEC-weighted), maximum modulation 75 kHz
200 Channels
Unbalanced: 1/4" TS ("mono") phone jack
Balanced: XLRM-type
=1% (10 kHz deviation at 1 kHz)
20 dBuV (S/N 70 dB at 5 kHz deviation, IEC-weighted)
Cardioid
65.75 MHz, 10.7 MHz
Microphone: 25 mV (at 1 kHz, +/-5 kHz deviation, 10k ohm load)
Instrument: 50 mV (at 1 kHz, +/-5 kHz deviation, 10k ohm load)
Three-position switch: 0 / -6 / -12 dB
Microphone: XLRM-type, (balanced); Instrument: 6.3 mm (1/4") TS unbalanced phone jack
Back-Lit LCD Display & Battery / Signal Status LED
Connector: 6.3 mm (1/4") TRS ("stereo") phone jack
Power output: 10 mW + 10 mW
t 1 kHz, +/-5 kHz deviation into 32 ohms
maximum output, 220 mW + 220 mW into 32 ohms
DC 10V-12V, 20 mA (BNC-type jack)
100-240V AC 50/60 Hz, 8W
5deg. C (41deg. F) to 45deg. C (113deg. F)
(2) 1.5v AA Alkaline
8.31x1.74x9.26" / 21.11x4.42x23.52cm
1.7kg / 3.8lbs (without accessories)
042005130122
The Audio-Technica AEW-R4100 Receiver (Band D 655.500-680.375 MHz) is designed for use with the 4000 series wireless microphone system. The receiver features frequency adjustable UHF reception, allowing access of up to 200 user selectable channels. Diversity reception allows 2 built-in, independent receivers to relay on a single frequency for the strongest possible reception.
The rear panel reveals both unbalanced 1/4" Phone and balanced XLR outputs. A comprehensive back-lit LCD display reveals channel and frequency settings, signal status and transmitter battery status. The 4000 series enhanced features include IntelliScan which automatically sets best available frequencies on all linked receivers and Dual Compander circuitry which processes high and low frequency signal separately resulting in superior audio quality.