Audio-Technica ATN3600LC Conical Replacement Stylus

Replacement stylus for the Audio-Technica AT3600L cartridge
This update of the venerable ATN3600L conical bonded stylus, which has sold by the millions and been trusted by countless music lovers for more than 50 years, features a new modern design while retaining the ease-of-use, reliability, and sound quality that have made it the replacement stylus for so many turntables. The 0.6 mil conical stylus ensures proper contact with the record groove even when the cartridge is not quite level.

• Stylus Shape: Conical
• Stylus Dimension: 0.6 mil
• Stylus Life: Approx. 300-500 hours

Update to the conical bonded stylus-equipped ATN3600L, loved for more than half a century

Audio-Technica Replacement Stylus for Turntables
The ATN3600LC uses a conical bonded stylus that ensures proper contact with the groove of the vinyl disc, even when the cartridge is set slightly tilted. This model has been updated with a modern design while maintaining the same ease of use, quality, and sound quality. It is compatible with the ATN3600L, so replacing your cartridge is easy.

ATN3600LC - To remove old stylus (needle)
Hold the cartridge in one hand, grasp the plastic stylus housing with thumb and forefinger, and pull away from the cartridge. The stylus assembly comes away at a slight angle, as indicated by the arrow.

To install replacement stylus
Insert the new stylus assembly into the cartridge at a slight angle, so the hook at the end of the stylus fits into the slot in the cartridge body. The stylus assembly should click into place when fully seated on the cartridge. The stylus must be fully seated on the body for proper operation.