

See Options
2 Year
$89.99
3 Year
$109.99
5 Year
$179.99
Need help? Ask our experts.
Review Summary
2019-08-08T08:23:01
We love the AT 3000 series wireless system. Very reliable in our worship centers.
NORBERT K.
2018-10-30T11:43:07
I just used this unit for the first time this past weekend and everything worked well with no problems. I own several units of the previous AT 3000 Series and there are several good improvements with this new model. Overall, this unit is easy to use and seems to be built to last for years. I would recommend this for Church's, Elementary & Jr. High Schools and other similar venues that require a semi-profession wireless system.
NATHAN L.
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
DE2: 470.125 to 529.975 MHz
2395 frequencies
25 kHz, minimum
FM
+/-38 kHz (THD: 10%)
Mic Input: >115 dB (A-weighted), typical
Instrument Input: >112 dB (A-weighted), typical
<1.0% (at 1 kHz, +/-17.5 kHz deviation)
328' (99.98m)
Open range environment with no interfering signals
-5 to 45 deg. C (23 to 113 deg. F)
31 Hz to 15.50 kHz
Frequency response depends on attached microphone element
True diversity
60 dB, nominal
20 dBuV at 60 dBA S/N ratio (50 Ohms termination)
Power: 12 VDC, 160 mA (combined)
Input: BNC-type, 50 Ohms
XLR: +14 dBV, balanced
1/4" / 6.3 mm: +8 dBV, unbalanced
100-240 VAC to 12 VDC, 50/60 Hz, 1 A (center positive) switched-mode external power supply
5 to 45 deg. C (41 to 113 deg. F)
High: 30 mW
Low: 10 mW
(switchable, at 50 Ohms)
Following federal and national regulations
cH-style screw-down 4-pin connector
Pin 1: GND
Pin 2: Instrument input
Pin 3: Mic input
Pin 4: DC bias +5 V
125 Hz, 12 dB/octave (low-frequency roll-off)
2x 1.5 V AA (not included)
Alkaline - High: 8.0 hours
Low: 9.0 hours
Ni-MH 1900 mAh - High: 9.0 hours
Low: 9.5 hours (Depending on battery type, usage and environmental conditions)
Receiver: 8.27 x 7.52 x 1.71" (21.01 x 19.10 x 4.34cm)
Transmitter: 2.52 x 3.22 x 0.91" (6.40 x 8.18 x 2.31cm)
Receiver: 38.8 oz (1099.96g) without accessories
Transmitter: 3.6 oz (102.06g) without batteries
4961310143428
Great system
By NORBERT K.
We love the AT 3000 series wireless system. Very reliable in our worship centers.
Just imagine the power and versatility of the ATW-3211DE2 Fourth Generation Wireless System from the 3000 series. This advanced system includes the ATW-R3210 Receiver and ATW-T3201 Transmitter, operating within the DE2 frequency band of 470.125 to 529.975MHz.
The ATW-R3210 receiver is equipped with automatic frequency scanning, a feature that eliminates the need for manual channel searching by automatically selecting the most suitable frequency for your location. Its 25 kHz frequency spacing ensures easy discovery of open frequencies in crowded RF environments, while pre-coordinated frequency scan groups streamline the selection of usable frequencies in a multichannel wireless system.
The receiver boasts an impressively wide 60 MHz UHF tuning bandwidth, offering maximum versatility in an increasingly congested RF environment. It operates in four frequency bands: DE2 (470-530 MHz), EE1 (530-590 MHz), EF1 (590-650 MHz), and FG1 (650-700 MHz).
The ATW-T3201 body-pack transmitter, on the other hand, operates using two AA batteries and features high- and low-level RF output settings. The low-level setting extends battery life while maintaining a strong RF signal link.
Both the receiver and transmitter include OLED screens for optimal readout of key settings and alerts. The receiver's dual-mode display can switch between standard view or a performance view that highlights key metering, while the transmitter's OLED screen presents a wealth of setup and operating information, including battery indicator, mute status, and operating frequency.
The ATW-3211DE2 Fourth Generation Wireless System is designed for durability and ease of use, making it an ideal choice for worship centers, schools, and other venues requiring a reliable, semi-professional wireless system. With its advanced features and robust construction, this system is built to deliver superior performance and longevity.