


See Options
2 Year
$89.99
3 Year
$109.99
5 Year
$179.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
DE2: 470.125 to 529.975 MHz
2395 frequencies
25 kHz, minimum
FM
+/-38 kHz (THD: 10%)
Mic Input: >115 dB (A-weighted), typical
Instrument Input: >112 dB (A-weighted), typical
<1.0% (at 1 kHz, +/-17.5 kHz deviation)
328' (99.98m)
Open range environment with no interfering signals
-5 to 45 deg. C (23 to 113 deg. F)
31 Hz to 15.50 kHz
Frequency response depends on attached microphone element
True diversity
60 dB, nominal
20 dBuV at 60 dBA S/N ratio (50 Ohms termination)
Power: 12 VDC, 160 mA (combined)
Input: BNC-type, 50 Ohms
XLR: +14 dBV, balanced
1/4" / 6.3 mm: +8 dBV, unbalanced
100-240 VAC to 12 VDC, 50/60 Hz, 1 A (center positive) switched-mode external power supply
5 to 45 deg. C (41 to 113 deg. F)
High: 30 mW
Low: 10 mW (Switchable, at 50 Ohms)
Following federal and national regulations
2x 1.5 V AA (not included)
Alkaline - High: 8.0 hours
Low: 9.0 hours
Ni-MH 1900 mAh - High: 9.0 hours
Low: 9.5 hours (Depending on battery type, usage and environmental conditions)
Interchangeable
Dynamic
Cardioid
90 Hz to 16 kHz
Receiver (WxDxH):
8.27 x 7.52 x 1.71" (21.01 x 19.10 x 4.34cm)
Transmitter (LxD):
Without Capsule: 7.60 x 1.46" (19.30 x 3.71cm) (maximum diameter)
With Capsule: 10.43 x 2.13" (26.49 x 5.41cm) (maximum diameter)
Receiver:
38.8 oz (1099.96g) without accessories
Transmitter:
Without Capsule: 7.1 oz (201.28g) (without batteries)
With Capsule: 11.6 oz (328.85g) (without batteries)
4961310143480
ATW-R3210 3000-Series Receiver
The ATW-R3210 receiver features automatic frequency scanning that eliminates the need for searching for clear channels by automatically selecting the most appropriate frequency for the area in which the wireless is operating. 25 kHz frequency spacing enables the system to easily find an open frequency in crowded RF environments, while pre-coordinated frequency scan groups simplify selection of usable frequencies in a multichannel wireless system. Once selected, frequencies can be synced with transmitters using the system's IR sync functionality.
Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in four frequency bands
True Diversity operation reduces dropouts
Frequency scan and IR sync functionality for ease of setup
Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
Receiver include OLED screens for optimal readout of key settings and alerts
Antenna power available for powered antennas and other in-line RF devices
Ground-lift switch helps eliminate audible hum caused by ground loops
Balanced and unbalanced audio output jacks
The system's squelch setting can be configured to automatically adjust to maximize range while minimizing potential interference. Advanced digital Tone Lock squelch provides enhanced rejection of interference. In addition, the Tone Lock signal from the transmitter also conveys information on the transmitter's battery condition and mute status back to the receiver for display. The receiver's dual-mode front panel display can switch between the standard view, which provides continuous indication of RF signal strength, frequency, mute status, audio modulation level of the received signal and transmitter information and a performance view, which highlights key metering.
Settings can be easily adjusted using the control dial and BACK button located on the receiver's front panel. Settings can also be locked to prevent them from being changed. Operating on 12V DC, the receiver incorporates rear-panel connections for balanced XLR and unbalanced 1/4" outputs, along with detachable BNC 1/4" wave antennas. Switchable 12V DC antenna power is available on the BNC-type connectors for powered antenna accessories. The receiver is half-width for a standard 1U 19" rack-mount and includes rack-mount adapters.
ATW-T3202 3000-Series Handheld Transmitter
All transmitters operate using two AA batteries and feature high- and low-level RF output settings. The low-level setting extends battery life while retaining a strong RF signal link. Charging terminals on the base of each transmitter work with the optional ATW-CHG3 and ATW-CHG3N charging docks to recharge AA NiMH batteries. Each transmitter's OLED screen presents a great deal of setup and operating information, including battery indicator, mute status and operating frequency.
Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in four frequency bands
Several Audio-Technica interchangeable microphone capsules separately available
Industry-standard thread for use with interchangeable microphone capsules
Unique multifunction button on the body-pack transmitter can be used to switch to a backup frequency
IR sync functionality for ease of setup
Charging terminals on transmitters to recharge NiMH batteries
Setup functions are menu-driven via soft-touch controls, which are covered to prevent accidental activation. A dual-color status LED illuminates green when power is on and red when the transmitter is muted or battery power is low. Transmitters have a selectable high-pass filter and a gain setting that can be adjusted in 2 dB increments. As with the receiver, transmitter settings can be locked. The ATW-T3202 handheld transmitter offers extremely low handling noise.
The transmitter's industry-standard thread mount also allows it to be used with additional Audio-Technica capsules (available separately) and other compatible capsules. Its multifunction button can be programmed to perform a specific function when pressed and held: mute the audio; mute the audio even when the transmitter is locked; turn off RF transmission; or switch to a preselected backup frequency to avoid interference. (The multifunction button can also be disabled.) The transmitter housing is made of metal with an integral antenna and an OLED screen. Each handheld transmitter includes a heavy-duty Quiet-Flex stand clamp.
ATW-C510 Interchangeable Cardioid Dynamic Microphone Capsule
The interchangeable cardioid dynamic microphone capsule (ATM510 equivalent) for use with ATW-T5202 and ATW-T3202 handheld transmitters. Its industry-standard thread allows use with other compatible handheld transmitters.
Industry-standard thread mount
Tailored for smooth, natural vocal reproduction
Rare-earth magnet for improved output and transient response
Excellent off-axis rejection for minimum feedback
Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
Durable performance for professional applications