Audix APS-911 Phantom Power Supply and Adapter for ADX40, MICROD, HT2P, ADX10FLP, ADX10P, ADX20iP & ADX60 Microphones

The Audix APS911 Battery-Operated Phantom Power Supply and Converter is a battery-operated phantom power supply for energy-efficient electret mics that can also adapt 48V phantom power from a mixer or preamp to the mini XLR connection found on these mics. Use it with Audix's lavalier, hanging, boundary plate and HT2 headset microphones. Special extras on the APS911 include an on/off switch and a bass roll-off feature.

Battery-Operated Phantom Power
Using a single 1.5V AA battery, the Battery-Operated Power Supply outputs 9V of phantom power for energy-efficient electret mics including Audix lavalier, hanging, boundary plate and headset models.

Adapt Standard Phantom Power for Electret Mics
The Phantom Power Adapter also mates with phantom power sources on standard XLR connectors (such as 48V mixer channels) and assures that power is supplied to the correct mini XLR pins for Audix electret mics. In this case, the APS911 is in passive mode, passing whatever current is supplied.

Adapt Standard Phantom Power for Electret Mics
A built-in on/off switch helps conserve battery life and also acts as a mode selector when using the APS911 as either a battery-operated phantom power source or a passive phantom power converter.

Bass Roll-Off
Clean your recordings of low-end rumble, structural noise transmitted through a mic stand, or unused frequencies by activating the handy 150Hz low cut filter. Since most human speech occurs above this cutoff, you will want to use it routinely for voice recording.