
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Analogue-Analogue (L=R input, output de-emphasized):20Hz-15kHz +/-0.2dB
Analogue-Analogue (rms 20Hz-20kHz, output d/e): <-75dB ref: 100% modulation (d/e on)
At 6dB limiting: <-70dB / 0.03% THD
Better than 60dB at 1kHz
Analogue:: Active balanced, 10k (bridging), standard operating level -6dBu to +14dBu (clip +22dBu)
Digital: AES-3 (XLR); 32, 44.1, 48, 88.2, 96kHz sample rate. 16, 20, or 24 bits
MPX (Analogue): Unbalanced (on BNC), standard operating level -6dBu to +18dBu
3dB frequencies 3Hz [DC block], 25Hz, 45Hz, 70Hz, 110Hz, 12dB/octave
Capture range 40dB (+/-20dB); maximum positive gain can be set
Advanced AGC enables faster, programme-dependent operation
Nominal 2:1 slope
Boosts selected frequencies for presence and / or brightness
Look-ahead dual time-constant peak limiters plus NCDCS fully anti-aliased main clippers
Cut-off frequency 15.5kHz, overshoot compensated, stop-band better than -70dB
50ms or 75ms emphasis curve
Zenith / GE Pilot tone system
-1.0 to +2dB, Anti-aliasing, filters protect 19kHz +/- 200Hz and above 54kHz
Corrects low frequency overshoots in transmitters/ exciters. Fully adjustable
Setup is via PC GUI only
Select a factory preset, modify it, set levels etc, save to flash memory
USB on front panel, plus RS-232 on rear panel
100-240V AC (acceptable range 88V to 264V AC) / 12.5 Watts / 17VA typical
Every processing parameter, including all thresholds and time constants, can be accessed and modified under PC control
CE (EMC & LVD), RoHS
1-RU: 44 x 482 x 290mm (1.73 x 18.97 x 11.41")
1.8kg (3.96lbs)
The Audessence ProCoder-2 Audio Processor is a great value FM processor and stereo encoder that can save money whether your station is a big network keen to solve the dilemma of where to locate your favorite multiband audio processor or a smaller broadcaster looking to broadcast a loud signal without losing clarity and quality. Multiband processors can be located at the studio for convenience while obtaining better peak control (and therefore more loudness) at one or many FM transmitter sites using ProCoder's 'transparent mode' with LF- and HF- overshoot inhibiting algorithms. All the usual limiting and clipping functions for peak control that you'd expect to find are there too, including fully overshoot compensated 15kHz lowpass filters.
The broadcast audio processor section also has a full range of tools for 'stand-alone' use including world-renowned leve ler, plus effective presence and brightness enhancers to make sure your signal stands out. ProCoder delivers typical Audessence clarity and fidelity on voices and music.