See Options
2 Year
$499.99
3 Year
$649.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
Black
1/4" TRS stereo, headphone or line level
Tip: Audio Left;
Ring: Audio Right;
Sleeve: Ground
1 A-Net In, RJ45 connector;
Supports Pro16 and Pro16e
44.1/48kHz, 24-bit
Stereo Link, per channel pair;
Set at the input module;
Variable pan per mono channel or pan/spread per stereo channel pair
275 mW per side into 50 Ohms (both sides driven)
5 Ohms
3Hz-22kHz +0.2dB/-3dB at 50 Ohms
< 0.003%
24VDC, 0.5 amp
24VDC, 0.5 amp
-106dB (measured with zero data into all channels)
0.880 msec (measured from analog input to analog output)
Use Cat-5e (or better) cable;
Maximum 400 ft (122 m) between devices;
Supports Power Over A-Net
Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
24 VDC, 0.5 amp;
Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor
10.26 x 6.14 x 1.91" (260.6 x 155.95 x 48.51mm)
20.81 oz (590g)
Black
Yamaha digital mixer products and Aviom's Pro16 Series, including the A640, A360, A320, and legacy A-16II Personal Mixers, A-Net distributors, and output modules
16 channels of A-Net digital data;
8 channels on PM1D
Yamaha mini-YGDAI (MY) Expansion Card
Limited only by the number of available MY expansion slots in the digital mixer
44.1kHz to 48kHz, +/-10%
24-bit
A-Net Out: 1; EtherCon RJ45 connector
Switch 1-8: Stereo Link on/off
Switch 9-10: A-Net mode
A-Net Modes: 8-channel, 16-channel, Aviom, Test
Default is switch 9 up, 10 down
A-Net allows 16 channels of audio to be transmitted over one Cat-5e cable
use unshielded Cat-5e UTP (or better) cable;
max. length 500 feet (150m) between devices
<0.880 msec (measured from analog input to analog output)
none required;
uses Yamaha host device as source of power
SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable (requires D800 or D800-Dante A-Net Distributor)
4.75 x 6.25 x 1.5" (120.7 x 158.8 x 38.1mm)
12.7 oz (360g)
Black
A640, A360, A320, and A-16II Personal Mixers
Eight RJ45 connectors, powered;
Compatible with A640, A360, A320, and A-16II Personal Mixers
Pro16e A-Net;
RJ45 connector, unpowered
Supports system expansion and the A-16II, A320, and A360 Personal Mixers
Power On (red); Network Sync (green)
Two 8-position DIP switch blocks (1-16, 17-32)
24VDC, 0.5 amp;
Transmitted over the Cat-5e cable
Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003, and FCC 47 CFR Part 15 Class B emissions limits.
Unshielded Cat-5e cable may be used on all other network connections
Internal, IEC connector
100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz @220 W max
115V range: T2.5AL/250V, slow-acting
230V range: T1.25AL/250V; slow-acting
Pro16e Aviom A-Net;
RJ45 connector
3-position DIP switch selects the starting channel that Personal Mixers will receive from the network (1, 17, 33, or 49)
W x D x H: 19 x 7.25 x 3.5" (482.6 x 182 x 88.9mm);
2U high
12 lbs (5.44kg)
Black
Attaches with three screws to bottom of an A640, A320, A360, A-16II, or A-16CS
Screw Size: 6-32, 1/4" (6.35mm) long screws (includes three)
Wide at front: 6.25" (158.75mm)
Wide at rear: 4.5" (114.3mm)
High: 3" (76.2mm)
Black
Any Pro16 or Pro64 gear
25' (7.6m)
The Mix320-Y Personal Mixing System is a complete personal mixing system for six performers, designed for users of Yamaha digital mixing consoles.
The Y1 A-Net Card plugs into any open MY expansion slot on your Yamaha console. There's nothing to configure-just assign sources from the Yamaha user interface to the card's 16 channels and they will appear on the Personal Mixer's channel buttons.
The A320 Personal Mixers get their digital data and power over the same cable, so all you need to do is connect a Cat-5 cable and you're ready to start using the system.
A complete monitoring system in a box, ready to use!
The Mix320-Y Personal Mixing System is available in two versions. The standard version is great if you already have in-ear monitors and /or headphones. If you're new to personal mixing and need IEMs, there is an enhanced version of the kit with six MEE Audio M6 Pro in-ear monitors included. These single-driver IEMs include a 72-inch cable, an assortment of ear tips, and a case.
The Mix320-Y Personal Mixing System gets its inputs from a Y1 A-Net card installed in your Yamaha digital mixing console. A D400 A-Net Distributor is used to supply A-Net digital data and DC power to the mixers, and the system includes six A320 Personal Mixers for the performers. It also includes six MT-1a Mic Stand Mounts for attaching the A320 mixers to mic stands, as well as all the Cat-5e cables you'll need to connect the products.
Intuitive Mixing
The A320 Personal Mixer gives performing and recording musicians simple, intuitive control over their monitor mixes. It features 16 mono or stereo mix channel buttons, individual volume controls, and easy-to-use Stereo Placement controls. Plug headphones, ear buds, or a wireless in-ear monitoring system into the Personal Mixer and you're ready to start mixing.
A Simple Digital Console Interface
The Y1 A-Net Card for Yamaha allows up to 16 sources from the console to be assigned as inputs to the personal mixing system.
Assign any combination of channels, direct outputs, aux sends, groups, or sub-mixes from the Yamaha console user interface to the Y1 card.
Power and Audio Over Cat-5
For distributing the A-Net digital data and DC power to the A320 Personal Mixers, the system includes the D400 A-Net Distributor. Just connect the console card to the distributor's A-Net In and use the D400's powered A-Net ports for connecting Personal Mixers.