
See Options
2 Year
$499.99
3 Year
$649.99
5 Year
$949.99
Need help? Ask our experts.
Review Summary
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
1/4" TRS stereo, headphone or line level
Tip: Audio Left;
Ring: Audio Right;
Sleeve: Ground
1 A-Net In, RJ45 connector;
Supports Pro16 and Pro16e
44.1/48kHz, 24-bit
Stereo Link, per channel pair;
Set at the input module;
Variable pan per mono channel or pan/spread per stereo channel pair
275 mW per side into 50 Ohms (both sides driven)
5 Ohms
3Hz-22kHz +0.2dB/-3dB at 50 Ohms
< 0.003%
24VDC, 0.5 amp
Transmitted over the Cat-5e cable
-106dB (measured with zero data into all channels)
0.880 msec (measured from analog input to analog output)
Use Cat-5e (or better) cable;
Maximum 400 ft (122 m) between devices;
Supports Power Over A-Net
Use shielded Cat-5e (or better) cable to stay below the CISPR 22 Class B, ICES-003 and FCC 47 CFR Part 15 Class B emissions limits
24 VDC, 0.5 amp;
Power is supplied over the Cat-5 cable when connected to an Aviom A-Net Distributor
16, balanced line-level, 1/4-inch TRS connector
Tip: Audio +; Ring: Audio -; Sleeve: Ground
Impedance matched output
48kHz sample rate, 24 bit
4Hz-22kHz
One Category 5 (RJ45 connector)
Four-position slot range selector switch for use with Pro16e A-Net
One Category 5 (RJ45 connector)
Four-position switch, -10dBv, 0dBu, +4dBu and +22dBu
Signal Present and Clip, per channel
Impedance: 48k ohms
LEDs; green: Signal Present, red: Clip; per channel
Stereo Link, per channel pair;
Two-position switch (Normal, Link)
+22dBu
17.8 Kohms
4Hz-22kHz +0.2dB/-3dB
< 0.003%
-90dB
10(-12)
90dB typical, A/D to D/A
Measured from AN-16/i to AN-16/o Output Module
A-Net: 1; RJ45 connector
Use unshielded Cat-5e UTP (or better) cable
<0.880 msec (measured from analog input to analog output)
External, DC, universal switching type
100-240 volts, 50/60Hz, 30VA
18-24 VDC, 0.5 amp
2 mm
18-24 VDC, 500mA
Pro16 or Pro16e A-Net;
RJ45 connector
2-position DIP switch selects the starting channel that Personal Mixers will receive from the network (1, 17, 33, or 49)
Chooses between local (front panel) stereo links (up) or network stereo links (down)
Eight RJ45 connectors, powered
Pro16e A-Net;
RJ45 connector, unpowered
Power On (red); Network Sync (green)
Two 8-position DIP switch blocks (1-16, 17-32)
24VDC, 0.5 amp
Transmitted over the Cat-5e cable
Front Panel Connections: Shielded Cat-5e (or better) cable must be used to stay below the CISPR 22 Class B, ICES-003 and FCC 47 CFR Part 15 Class B emissions limits.
Unshielded Cat-5e cable may be used on all rear panel connections
Internal, IEC connector
100-120 VAC or 200-240 VAC (with selector switch); 50-60Hz at 220 W max
115V range: T2.5AL/250V
230V range: T1.25AL/250V
In-Ear (Intra-Aural)
0.39" (10mm)
Dynamic
1, per earpiece
No
20 Hz to 20 kHz
100 dB at 1 kHz / 1 mW
16 Ohms
30 mW
Omni-Directional
100 Hz to 10 kHz
-42 dB
1/8" (3.5mm) TRS Right-Angled
1/8" (3.5mm) TRRS Right-Angled
1/4" (6.3mm) TRS
Y-Type
Yes
Yes
Android, iOS
72" (182.88cm)
IPX5
Personal Mixer (WxDxH): 10.26 x 6.14 x 1.91" (26.06 x 15.60 x 4.85cm)
Input Module (WxD): 19 x 5.75" (48.26 x 14.61cm), 1U high
A-Net Distributor (WxDxH): 19 x 7.39 x 3.5" (48.26 x 18.77 x 8.89cm), 2U
Mic Stand Mount (Front WxH): 6.3 x 3.0" (16.00 x 7.62cm)
Mic Stand Mount (Rear WxH): 4.5 x 3.0" (11.43 x 7.62cm)
Personal Mixer: 1.3 lbs (0.59kg)
Input Module: 6.8 lbs (3.08kg)
A-Net Distributor: 12.0 lbs (5.44kg)
From the stage to the studio, the Mix320-A Personal Mixing System is a comprehensive audio solution designed for professional musicians, DJs, and audio engineers. This advanced system offers a complete 16-input personal mixing setup for six performers, making it an ideal choice for both live performances and studio recordings.
The heart of the Mix320-A system is the A320 Personal Mixer, which delivers high-quality digital data and power over a single cable. Simply connect a Cat-5 cable, and you're ready to start mixing. This innovative feature simplifies setup and reduces clutter, making the system highly portable and user-friendly.
The Mix320-A Personal Mixing System also includes the Analog AN-16/i v.2 Input Module, a front-end component that allows up to 16 line-level signals to be connected as inputs. Each channel features a 1/4-inch TRS balanced input and thru jack, making it easy to interface with direct outs, aux sends, or insert points on your mixing console or recording interface. The analog audio is then converted to 48kHz, 24bit A-Net digital data for distribution to the Personal Mixers.
To distribute the A-Net digital data and DC power to the A320 Personal Mixers, the Mix320-A system includes the D400 A-Net Distributor. This component features A-Net In and Out jacks, plus eight powered A-Net ports for Personal Mixers, ensuring a seamless and efficient distribution of power and audio.
For those new to personal mixing or in need of in-ear monitors (IEMs), the Mix320-A system comes with six MEE Audio M6 Pro IEMs. These single-driver IEMs include a 72-inch detachable, replaceable cable, an assortment of flexible ear tips for a comfortable fit, custom-engraved metal faceplates, and a protective case.
The A320 Personal Mixer offers intuitive control over monitor mixes, with 16 mono or stereo mix channel buttons, individual volume controls, and easy-to-use Stereo Placement controls. Connect headphones, earbuds, or a wireless in-ear monitoring system to the Personal Mixer, and you're ready to start mixing.
In conclusion, the Mix320-A Personal Mixing System is a high-quality, professional, and durable solution for all your personal mixing needs. Whether you're a performing musician, a DJ, or an audio engineer, this system provides the advanced technology and comprehensive features you need to deliver the best audio experience.