Arca Swiss Slidefix Quick Release Camera Plate - 32mm Universal - (32mm long x 32mm Wide - 1.26x1.26")

2024-12-25T10:35:18

Simple with high quality! I keep it attached permanently to the camera.

MILENKO D.

2022-02-06T07:31:12

Well built product, easy to place camera on tripod and remove quickly

MARGARET K.

2021-01-21T11:02:33

Used with Arca Swiss Monoball P0 with Panning System and QS Slidefix Quick Release System (I have 6 heads on various mono- and tri-pods. I keep a plate on each camera, telephoto, astronomical tracker and spotting scope. Expensive but the BEST, sturdiest and most reliable quick-release system I have ever used.) Some have commented on seating problem into the head. On the P0 Monoball Panning Head, always start with the PANNING LOCK aimed AWAY from you (which also then allows aiming the camera straight up) and secure the head position with the plate lock also aiming away from you. Mount the plate on the camera or telephoto lens so the the OVER-HANG is FORWARD. It is then a breeze to seat the heel of the plate with the camera lens upward and while holding the plate lock open, lower the camera/lens to level and PUSH the lock CLOSED COMPLETELY UNTIL IT CLICKS. Check that the camera is secure and you are assured it is safe to let go of the camera. Once you have that setup and routine, you can do it with gloves on and your eyes closed in a snow storm! (Plates also come wider with a custom PIN located to match your DSLR camera base so the the plate CANNOT turn even if the screw is slightly loose) LOVE THIS SYSTEM!!!

SEIDLITZ T.

2011-09-06T21:00:00

Works well. Make sure screwed onto camera bottom snugly cause can loosen when camera in portrait orientation.

Ihaul

2011-09-06T21:00:00

This plate is sometimes difficult to attach and you have to fiddle with it to get it securely in place. Once it is in place it is strong and secure.

BARBARA B.