











This item is no longer available.
Review Summary
A new Benchmark is set
The TG 100 is the first entry-level wireless system that includes a pilot tone function which provides a lot of advantages. Speech clarity combined with user-friendly handling and improved protection against interference makes the TG 100 a handy all-round wireless system. Developed for smaller sound installations as well as for ambitious hobby musicians the TG 100 wireless system is equally adept to both speech and singing.
Events
The beltpack set makes the TG 100 wireless system an ideal tool for a wide range of events. From a presentation to an energetic sports event: While the sound switch provides speech clarity, the neckworn headset always guarantees a perfect fit and maximum flexibility.
Pilot Tone Function
The pilot tone prevents noise and assures user-friendly handling. The TG100 wireless system uses the pilot tone to identify a correct signal for improved interference-free transmission and to transmit a low battery warning as well as the audio mute information to the receiver.
Sound Switch
The integrated sound switch equally improves the clarity of speech and vocals without the need for a mixing console.
Professional Diversity Receiver
The professional diversity receiver ensures best signal reception even in a complex environment.
24 Channels
A rotating dial allows the user to choose between 8 different channels. 3 available band variants enable the use of up to 24 channels simultaneously (depending on the local RF-situation).
10 h Battery Operation
With a battery operation of 10 hours there is no need for concern regarding extensive encores or long-lasting events.
Applications
The wireless TG 100 Beltpack Set includes the TG 100R diversity receiver and the TG 100B beltpack transmitter. It is ideal for applications on stage such as moderations, presentations or in houses of worship. The set is easy to operate and therefore also useful for inexperienced users.
TG 100R VHF Diversity Receiver
The channel selector switch on the front of the receiver allows selecting one of eight channels. Three LEDs display an RF connection, the battery state of the transmitter, an occupied or vacant channel, an audio signal, clipping and the operating state of the device by different colors and modes. The telescopic antennae are permanently attached to the front of the receiver. A weighting circuit ensures that an antenna is selected that supplies the better signal. The level of the audio output is adapted to the input level of the amplifier or mixing console by using the volume control. The receiver is powered by a 12 V DC power adapter.
Permanently attached telescopic antennae
8 switchable channels
"SoundSwitch" for optimal audio quality without using additional high-end devices
Power adapter 12 V DC
Front View
Channel selector switch
Volume control for audio output
LEDs to display RF connection, battery state, audio signal, clipping, operation
Rear View
Audio output, 3-pin XLR / 1/4" jack (6.35 mm)
"SoundSwitch" change-over switch for vocals/guitar or speech
Integrated strain relief for power cable
12 V DC connection for power adapter
TG 100B Beltpack Transmitter
The 4-pin mini XLR male connector allows connecting microphones or instruments. The input signal can be adjusted to an optimal level with the gain switch in the battery compartment. Inside the battery compartment there is also a channel selector switch. Furthermore, the TG 100B is provided with a silent on-off button and LEDs to display operation and peaks. The beltpack transmitter is powered by two 1.5 V AA alkaline batteries, which allow an operating time of approx. 8 hours. The cover of the battery compartment is provided with two magnets which ensure a secure fastening.
Plastic housing
LEDs to display operation and peaks
Channel selector switch (8 channels)
Selectable gain in three stages
4-pin mini XLR male connector for microphones or instruments
Permanently attached antenna
Detachable belt clip
Powered by 2 AA batteries