Bosch KBE-498V28-20N Prepackaged 540 TVL IP & Day/Night Dinion 2X Camera with 2.8-11mm Lens and Outdoor Mount, microSD Slot

SKU: BHKBE498V282

This item is no longer available.

Overview
Compare
Specs
Protection
Q&A

Questions & Answers

Reviews about this item

Review Summary

Select a plan in the Add Protection section above and purchase with this product by clicking “Add to Cart”.

image-protection

TRUSTED PROTECTION PLANS, EXCEPTIONAL SERVICE.

Invest In Your Gear and Peace Of Mind!

Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.

Repair or Replacement

Repair or Replacement

If we can’t fix it, we’ll replace it at no additional cost.

Accidental Damage

Accidental Damage

Protect your product from drops, spills, and more.

Peace of Mind

Peace of Mind

Enjoy your gear without fear. We have you covered!

Malfunction Protection

Malfunction Protection

When regular use of your product over time results in mechanical or electrical failure.

Zero Deductible

Zero Deductible

We will never charge you a deductible after the purchase of a plan.

Customer-Focused Support

Customer-Focused Support

Our claims process is simple & easy and our customer service team is happy to help.

Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.

Bosch KBE-498V28-20N Specifications

Camera
  • Signal System

    NTSC

  • Image Sensor

    1/3" Interline transfer CCD

  • Number of Pixels

    768 x 494

  • Horizontal Resolution

    540 TVL

  • Minimum Illumination

    Scene Illumination (50 IRE): 0.65 lux (0.065 fc)
    Scene Illumination/ Full Video (100 IRE): 2.6 lux (0.26 fc)

    Night Sense
    Scene Illumination (50 IRE): 0.26 lux (0.026 fc)
    Scene Illumination/ Full Video (100 IRE): 1.04 lux (0.104 fc)

  • Controls

    Day/Night: Color, Mono, Auto
    Modes: 6 preset programmable modes
    Dynamic range: 120 dB (20-bit image processing)
    Signal-to-Noise Ratio: > 50 dB
    Dynamic engine: 2X-Dynamic, XF-Dynamic, SmartBLC+2X-Dynamic
    SmartBLC: On (includes 2X-Dynamic ) / Off
    AGC: AGC On or Off (0 - 30 dB) selectable
    White Balance: ATW (2500 to 10000K), ATWhold and manual

  • Controls (Cont.)

    Shutter: Auto (1/60 to 1/10000) selectable / Auto (1/60 to 1/50000) automatic flickerless, fixed selectable
    Sensitivity up: Adjustable from Off up to 10x
    Auto Black: Automatic continuous, Off
    Dynamic Noise Reduction: Auto, On/off selectable
    Sharpness: Sharpness enhancement level selectable
    Peak White Invert: On/Off
    Privacy Masking: Four independent areas, fully programmable
    Video Motion Analysis: Motion+

  • Controls (Cont..)

    Test Pattern Generator: Color bars 100%, Grayscale 11-step, Sawtooth2H, Checker board, Cross hatch, UV plane
    Synchronization: Internal, Line Lock selectable
    Lens Mount: CS (max lens protrusion, 0.2" (5 mm), C mount compatible with supplied adapter ring
    Lens Types: Manual, DC- and Video-Iris auto-detect with override / DC-iris drive: max. 50 mA continuous / Video-iris: 11.5 VDC +/-0.5, max. 50 mA continuous
    Controls: OSD with soft-key operation (multi-lingual)

  • Audio

    Standard: G.711 300 Hz to 3.4 kHz at 8 kHz sampling rate
    Signal-to-noise ratio: > 50 dB

  • Audio I/O

    Audio: 1x mono line in, 1x mono line out
    Connector: 3.5 mm stereo jack
    Signal line in: 9 kOhm typical, 5.5 Vpp max
    Signal line out: 3.0 Vpp at 10 kOhm typical, 2.3 Vpp at 32 Ohm typical, 1.7 Vpp at 16 Ohm typical

  • Alarm

    Alarm: 2 inputs
    Connector: Clamp (non-isolated closing contact)
    Activation voltage: +5 VDC to +40 VDC (+3.3 VDC with DC-coupled 22 kOhm pull-up resistor)
    Relay: 1 output
    Connector: Clamp
    Voltage: 30 VAC or +40 VDC / Maximum 0.5 A continuous, 10VA

  • Data Port

    RS-232/422/485

  • Software Control

    Unit Configuration: Via web browser or Configuration Manager
    Flicker Control: 50/60 Hz, selectable
    Software update: Flash ROM, remote programmable

  • Network

    Protocols: RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP, SNTP, SNMP, 802.1x, UPnP
    Encryption: TLS 1.0, SSL, AES (optional)
    Ethernet: STP, 10/100 Base-T, auto-sensing, half/full duplex, RJ45
    PoE supply: IEEE 802.3af compliant

  • Video

    Video compression: H.264 (ISO/IEC 14496-10); M-JPEG, JPEG
    Data rate: 9.6 Kbps to 6 Mbps
    Resolution 4CIF: 704 x 480 (30 ips)
    Resolution CIF: 352 x 240 (30 ips)
    Overall IP Delay: Min. 120 ms, Max. 240 ms
    GOP structure: I, IPFrame rate: 1 to 60 H.264 / 1 to 30 M-JPEG

  • Video Out

    Signal: Analog composite (NTSC), service
    Connector: Ethernet RJ-45
    Horizontal resolution: 540 TVL
    Video S/N: 50 dB

  • Local Storage

    MicroSD card slot (card not included)

  • Power Connections

    1 mm (18 AWG), 3 conductor, 1m (5') wiring harness with flying leads (Brown/Blue-24 V, Green-Ground)

  • Power Requirements

    21 to 28 VAC, 60 Hz, 45 W
    Power-over-Ethernet
    PoE: IEEE 802.3af compliant (camera only; housing requires 40W)

  • Power Consumption

    550 mA / 650 mA IVA (12 VDC)
    550 mA / 650 mA IVA (24 VAC)
    200 mA / 250 mA IVA (PoE 48 VDC)

Housing

Jump to...
  • Construction

    Aluminum housing casing, neoprene gaskets, UV-resistant polymer end caps, and all stainless steel hardware

  • Finish

    Gray

  • Window

    0.12" (3mm) Thick UV-stabilized polycarbonate

  • Mounting

    Four (4), 5/16" (8mm) diameter fasteners (not included) are required for mounting

  • Image Format

    1/3" (IR)

  • Focal Length

    2.8-11 mm

  • Iris Range

    f/1.4-360

  • Focus Range

    1.1' (0.34m)

  • Back Focal Distance

    0.34" (8.64mm)

  • Lens Mount

    CS

  • Angle of View

    Wide: 97.4 x 72.4 deg.
    Tele: 26.2 x 19.7 deg.

  • Iris Control

    4-pin, DC control

  • Focus/Zoom

    Manual

  • Type

    Feed-through Wall Mount

  • Maximum Load

    20 lbs (9.07kg)

  • Size

    12" (30.48cm)

  • Mounting Head

    Adjustable 360 deg. pan, 180 deg. tilt

  • Finish

    Light gray

Environmental

Jump to...
  • Operating Temperature

    -40 to 116 deg. F (-40 to 47 deg. C)

  • Storage Temperature

    -40 to 158 deg. F (-40 to 70 deg. C)

  • Operating Humidity

    0% to 93% non-condensing

  • Enclosure Protection

    IP66, NEMA 4X

General

Jump to...
  • Dimensions (HxWxL)

    2.3 x 2.6 x 4.8" (5.84 x 6.60 x 12.19cm)

  • Weight

    Camera without Lens: 1.2 lbs (0.54kg)
    Housing: 9.04 lbs (4.10kg)
    Lens: 0.17 lbs (0.08kg)
    Mount: 0.9 lbs (0.41kg)

  • UPC Code

    800549604512

About Bosch KBE-498V28-20N

The KBE Series Prepackaged Cameras are complete surveillance systems that are quick and easy to install thanks to their plug-and-play design. This system includes a factory-installed camera (from Bosch's signature line of Dinion 2X model), a varifocal lens (with adjusted back-focus), a coax cable (for analog cameras) or Ethernet cable (for IP cameras) and a power cable (1.5 m or 5 ft) pre-wired into the housing. Outdoor housings include IP66 rating.

Superior image quality
The KBE Series cameras deliver unsurpassed picture performance under even the most difficult light and scene conditions.

Standard Definition Camera
The 20-bit digital video processing in the Dinion 2X Day/Night camera series enhances sensitivity; the 2X Dynamic extends the dynamic range. This unique combination provides a sharper, more detailed image with outstanding accuracy in color reproduction even under harsh light conditions.

Network-based control and configuration
Dinion IP network cameras are designed to ensure the highest possible image quality at all times, providing high-quality MPEG-4 video, at up to 30 images per second. Dinion IP models are ONVIF conformant devices that are able to exchange live video, audio, metadata and control information. The cameras use H.264 (Main Profile) compression, bandwidth throttling and multicasting capabilities to manage bandwidth and storage requirements efficiently, while delivering high image quality and resolution.

Bosch's innovative Quad-streaming feature enables Dinion IP standard definition cameras, quad streaming delivers three H.264 encoded streams (two 4CIF streams and an I-frame only stream) as well as a simultaneous M-JPEG stream. Each IP model features the Motion+ video motion analysis system that is based on pixel change and includes object size filtering capabilities and sophisticated tamper-detection capabilities. The IP cameras support local recording on a microSD card. This can be used for local alarm recording or for Automatic Network Replenishment (ANR) to improve the overall reliability of video recording.

Ease of installation and servicing
Each analog camera is equipped with Bosch's Bilinx bidirectional communication for remote programming. Bilinx uses standard video cable to transmit alarm and status messages, providing superior performance and simplified installation. Everything about these Prepackaged Cameras, from the installer-friendly design to the wide range of options, makes them an ideal solution for every surveillance application.

Bosch KBE-498V28-20N Features

  • Camera and lens pre-wired into a Bosch housing that includes a feed-through mount and 1.5 m (5') of cabling (plug-and-play design)
  • ONVIF conformant

What's in the box:

  • Bosch NBN-498-21P 540 TVL IP & Day/Night Dinion 2X Camera
  • 2.8-11mm Varifocal Lens
  • Indoor/Outdoor Mount
  • Heater/Blower
  • Sunshield
  • Instruction Booklet Packet
  • Ethernet Cable
  • 5' Power Cable
  • Bosch 3 Year Warranty