
Review Summary
Accidents happen where life happens. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failure, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for purchase Internationally or in U.S. Territories.
Browse our FAQ
Complies with FCC Part 15, ICES-003, and CE regulations
Complies with CE regulations, UL, CSA, EN, and IEC Standards
120 VAC
50/60 Hz
100 to 130
24 VAC, 50/60 Hz
4 function pan/tilt solid state drive with zero crossing turn-on; 1.0 A drive capability
6 VDC or 12 VDC, 100 mA maximum
4 VDC to 8 VDC
8 VDC to 16 VDC
Solid state drive with zero crossing turn-on; 1.0 A drive capability
Relay contact rating 250 VAC, 5.0 A resistive, 0.25 hp
99, with 4 functions each for use with 355 Degree pan/tilt drivers or 82 with 5 functions each for use with continuous pan/tilt drivers. Pan/tilt positions sensed at 10-bit accuracy. Note that the maximum number of pre-positions available in the system is dependent on the type of control system employed. Refer to the applicable controller specification for exact pre-position capabilities.
-40 Degree C to 60 Degree C (-40 Degree F to 140 Degree F)
-40 Degree C to 70 Degree C (-40 Degree F to 158 Degree F)
0% to 95% relative, non-condensing
3g swept sine wave, 15 Hz to 2000 Hz
50g, 11 ms, 1/2 sine
NEMA-4X, IP66, Enclosure Type RJ 1008 HPL
11.6 x 9.5 x 6.5" (295 x 241 x 165mm)
15 lb (6.8kg)
The LTC 8561 Series, LTC 8564/20, and LTC 8566 Series On-site Receiver/Drivers are control data decoder units and motor drivers for pan/tilt units and zoom lenses. These receiver/drivers are used in conjunction with Allegiant Series Microprocessorbased Switcher/Controller Systems.
The receiver/driver decodes Allegiant Bi-Phase control data from the switcher/controller system through the LTC 8568/00 Signal Distribution Units into specific control codes. In addition, the receiver/driver will accept RS-232 control code data generated by the LTC 8780 Series Data Converter Unit.
These receiver/drivers are available in a variety of input and output voltage configurations. All units are 50/60 Hz line frequency compatible. All units have low voltage DC lens drivers (6 volts or 12 volts selectable) for focus, zoom, and iris with adjustable speed. There are also four auxiliary outputs. One is a solid state relay with zero crossing switching fixed to the same voltage as the pan/tilt output. The others are relays which can supply voltage through contacts (normally open or normally closed) to control lights or other devices at the remote site. Auxiliary supply terminals provide power which is fuse-protected at the voltage of the pan/tilt output.
Advanced features include 99 pre-positions when using conventional 355 Degree pan/tilt drivers, 82 prepositions when using 360 Degree continuous pan/tilt drivers, installer friendly connectors, lockable enclosure latches, 10-bit resolution for improved pan/tilt preposition accuracy, and automatic pre-position tour capability.
Additional features include a full operating temperature range, an integral local test function, an unrestricted auto-pan feature for all models of pan/ tilts, random pan, a unique dither feature, selectable latching or momentary auxiliaries, polarity reversible lens drive, convenient thumbwheel selectable camera addressing, and a NEMA-4X, IP66 rated environmental enclosure.