Share:
Bron Kobold DLF 200 DC Reporter Kit, with 200 watt HMI Sun Gun, Ballast, Lamp, Filter, Barndoors & Case
SKU: BKK342U004 MFR: K342U004
$2,884.98
$2,951.00
Save: $66.02 OR
Key Features
- Achieve high light output with this 200W HMI kit, perfect for professional film lighting.
- Enjoy flicker-free operation, ensuring smooth, consistent lighting for every video shoot.
- This HMI Sun Gun kit is built for durability, ready to withstand demanding on-location shoots.
- Get accurate colors with our HMI light, ideal for broadcast and cinematic applications.
- The Bron Kobold HMI light is easy to use, saving you time on set with intuitive controls.
- This power-efficient 200W HMI light kit operates on 26-34VDC, maximizing battery life.
Special Order?Estimated to Ship: 12/18/2025
Free Shipping
See Options
1
Add Adorama Protect:
Available to U.S. customers only.
Need help? Ask our experts.
Overview
Compare
Accessories
Specs
Protection
Q&A
About Bron Kobold DLF 200 DC Reporter Kit
If you're a professional or amateur photographer or filmmaker seeking a comprehensive, high-quality lighting solution, the Bron Kobold DLF 200 DC Reporter Kit is the perfect choice. This kit is centered around the powerful 200 watt Reporter HMI Sun Gun, one of the smallest and lightest of its kind on the market. Despite its compact size, this fixture delivers a potent performance, serving excellently as a key light and equally well as a fill or back light.
The Reporter HMI Sun Gun boasts a spot to flood range of 16 to 43 degrees. In full spot mode, it can project a beam of 644 foot-candles, 16 feet in diameter from a distance of 10 feet. Switch to full flood, and it will emit a 149 foot-candle beam 43 feet in diameter from the same distance. This versatility makes it an ideal tool for both indoor and outdoor shoots.
The kit includes a DC ballast compatible with your choice of 2-Pin 26-34V DC source (sold separately). To help you shape the light to your specific needs, a four-leaf barndoor set is included. The kit also comes with a lightweight, durable case for easy storage and transport.
Please note that to complete this kit, a light stand and hot-restrike HMI bulb are required, both of which are available separately. With the Bron Kobold DLF 200 DC Reporter Kit, you'll have a versatile, powerful, and high-quality lighting solution at your fingertips.
Bron Kobold DLF 200 DC Reporter Kit Features
- DLf200 Fixture features:
- Focus: Use the rotary knob on the rear of the fixture to adjust focus; note the corresponding "flood" and "spot" symbols on the fixture label indicating the adjustment directions
- Barndoor Set: To place the barn door on the fixture, slip it onto the impressed section of the ring and secure it with the knurled screw located opposite the recess. Pull the knurled screw and let it spring back into place; then tighten it to secure the barn door
- Hot Restrike: Socket and switches are equipped to allow switching the fixture on and off repeatedly without the delay of waiting for the bulb to cool
- DC Ballast features:
- The required light output can be set (100 - 60% adjustment range) with the power regulator
- Color temperature can change with the power output depending on the type of lamp used
- Two-Pin connector
- To connect the ballast unit to the fixture just plug in the corresponding connection
- To disconnect, press the security mechanism on the socket before pulling out the plug
- Green LED is lit continuously: normal operating mode
- Green LED is flashing: the thermo protection is activated reducing the power continuously down to 60%
- Red LED Blinking: the mains voltage has dropped below 85 V. If this LED is flashing, the lamp will be switched off automatically
- Yellow LED has not lit up: the ballast is not grounded, or connected correctly
- IP 43, I, with strengthened insulation for additional protection; can take splashed water at a 60 Degree angle from vertical
- 2- 3.15A Fuses
- Ignition overload protection
- Temperature monitor
- Convection cooling
- Meets CE Standards
Warranty Information
This product has a limited warranty of 12 months for parts and 12 months for labor.