BeON Home Home Safety and Preventative Security System, Includes 3x Bulb with 3x Smart Module

Responds to Doorbell
Burglars check if you're home by ringing the doorbell. BeON detects the doorbell sound and lights up your house as if you were home.

Replays Lighting
Don't be an easy target. BeON automatically creates a lived-in look while you're away. No Programming at all.

Instant Fire Exit Lighting
Seconds matter! Light up your home automatically when a smoke/CO alarm is detected.

Four hours of Backup Light
Use the free app and on-board batteries to light up your house for up to four hours.

Stop break-ins before they happen
The system deters burglars by making it look like you're home. BeON learns and replays their lighting while you are away and even responds to the burglar's doorbell check by turning on lights just as if you're home.

Emergency Lighting for your home
Each system also comes standard with never-before available safety and emergency lighting for your home. Each bulb provides up to four hours of emergency lighting during a power outage. The modules respond instantly to smoke alarms turning on lights to help you get out safely in an emergency.

60W equivalent LED bulbs last 22 years
The LED Bulbs use only 13.5W for the same light output saving you money. Last 22 years when used 3 hours per day. You'll love the bright, beautiful warm light!

Affordable and easy to install
All the safety and security of high-end lighting systems, without the thousands of dollars in expense, electrical rewiring and tedious programming. Works with your existing doorbell and smoke alarms. Uses Bluetooth to communicate with smartphone. No gateway or router needed! Screw in bulbs. Download Free App & Setup. Done!

Activating Security Lighting
Slide the button to activate your security lighting. Activate Lighting Replay and Doorbell Lighting to make it look like your home when your not.

Lighting Replay
When activated, your lights will replay your lighting behavior. Each time you flip a switch your lights will learn your latest habits and build a lighting schedule that is unique to you. To start, BeON have provided a preprogrammed schedule for each bulb. See your schedule in the app.

Doorbell Lighting
Upon hearing the doorbell, your bulbs can light up in a sequence that you specify. Setup required. For example: Use it to simulate waking up in your bedroom, then turning on a hallway light, then turning on a light close to your front door.

Exit Lighting
Your bulbs will listen (Always ON Technology) for alarms and will turn all your BeON lights ON in case of an emergency. Setup required. (The BeON system can currently listen for one type of alarm, ex: smoke alarm OR carbon monoxide alarm)

Power Outage
Control your bulbs in the event of a power outage. Press the Activate button to turn on some or all of your BeON lights.

Slow Fade
When turning off your light switch, Slow Fade will keep your lights on at a low level for 10 seconds allowing you to exit a room safely. You can choose which lights slowly fade at the bottom of the Slow Fade page. Disabled by default.

Welcome Home
Enjoy a well-lit home when you enter your home. Press the Welcome Home button and get 3 minutes of light. Just turn the lights on during this period and the lights will remain on. You can adjust which lights turn on at the bottom of the Welcome Home page.

Smart Module
• Always Active -24/7 detection of alarm and lighting commands
• Memory - Learns your lighting behavior and stores your replay schedule
• Bluetooth - Bulbs communicate wirelessly, every bulb knows everything
• Upgradeable - Future-proof your system. Swap out for new modules
• Battery - When AC power isn't there, BeON's battery is. Recharge when the light switch is on
• Microphone - Trained to detect your doorbell and your smoke/CO alarms