










See Options
2 Year
$69.99
3 Year
$94.99
4 Year
$119.99
Need help? Ask our experts.
Review Summary
2025-07-16T05:46:45
I have deployed 2 of these cameras to simultaneously capture the construction of buildings at the university I work at. These appeared to be a good solution, as they were relatively cheap and the long USB cable would allow me to more easily mount the camera out of the reach of the general public, yet still have easy access to check on it. For about 7-8 months, the camera worked as expected. While the quality of the image wasn't incredible, it was certainly acceptable. One quirk I realized early on was the data transfer speed from the unit, through the extremely long USB cable, was quite slow. Therefore, when I was grabbing a month or 2 worth of footage, I would have to allow for a nice chunk of time. So, sometimes I didn't have that kind of extra time, so I'ld just pop by with my laptop (they only communicate with Windows machines BTW) and check on the camera. I would verify that it was still recording, check on the battery level, see what the live view looked like, then hit record once again and leave. What I had NOT realized, was that all these things might look fine? but the recording has stopped. What I believe happens is that you plug the camera in, and the power coming over the USB turns the camera on again. It then looks like the camera is on, and the record button is still active. You even see a battery level that appears acceptable. Well, you see ONE battery level, because the second battery level, the one from the additional battery pack disappears. It is not terribly obvious to notice though - it isn't like there is a second battery level that is flashing empty or something? it just isn't there and isn't obvious. The only way I realized that the camera had stopped recording was when I finally booked that free time and sat down to pull over files? and it had ended a month earlier. So, what had worked as expected now has this big flaw? one that requires you to babysit the camera far more than you would normally expect to. So that happened to BOTH cameras, and thus I made a point of checking on them more frequently, as well as double-checking the saved files and transferring them more frequently. Vacation comes this summer, and I check the cameras about a week before I head on vacation, only to have one of them do this exact same thing a couple of days after? yet again, I'm now missing a few weeks of footage. What I suspect happens is that if one of the batteries in the external pack goes bad, the entire pack goes offline. Otherwise, how else can you explain a good battery reading one day, then nothing a few days later? That or the battery reading you receive through the software simply can't be relied upon. There are other comparably-priced solutions on the market now that connect to the internet via WiFi, which I would far prefer, but our ITS does not believe they are secure enough to deploy. If you really want a high-quality, reliable construction Timelapse solution, you are likely going to be paying thousands of dollars to one of those construction cam-specific companies?. Or you have to get two of these (for redundancy), and babysit them. I'm stuck with them, but hopefully you all will find a better solution and not have to deal with this.
James G.
Accidents happen. Protect your favorite Adorama products and purchase a protection plan to stay covered from accidental damage, mechanical or electrical failures, and more.
If we can’t fix it, we’ll replace it at no additional cost.
Protect your product from drops, spills, and more.
Enjoy your gear without fear. We have you covered!
When regular use of your product over time results in mechanical or electrical failure.
We will never charge you a deductible after the purchase of a plan.
Our claims process is simple & easy and our customer service team is happy to help.
Adorama Protect powered by Extend is available for purchase to customers in the United States. Not available for international or U.S. territories purchases. Plans on open box items do not cover pre-existing damage.
Adorama Protect plans are available for ABS clients. If you have any questions or require assistanse, please call 800-223-2500
Browse our FAQ
1920 x 1080
CS
f/2.0
118 Degree
Time Lapse, Step Video, Stop Motion, Still Photo
2" (50.8mm) TFT LCD
Supports microSD/SDHC/SDXC Cards up to 128 GB (Minimum of Class 10 Cards Recommended, 8 GB microSD Card Included)
2x AA Batteries (Included)
5 VDC, 1 A (USB Type-C Connector, Cable Included)
Up to 18 Hours at Intervals of 3 Seconds
Up to 25 Days at Intervals of 5 Minutes
0.25" (6.35mm)
32 to 113 Degree F (0 to 45 Degree C)
Required, included
Alkaline
AA
2
2.4 x 2.8 x 1.7" (60 x 70.6 x 42.4mm)
3 oz (87.5g) (Without Battery)
Output: USB-C (to camera)
Input: USB-C (for USB-C cable
micro USB (for ATH2000 power supplier)
USB-A Male to USB-C Male
Weatherproofing Cap and Seal
UV Coating
Length: 49' (15m)
Supports USB 2.0 high speed data transferring at up to 200mbps
Design for TLC2000 series to be installed into Construction Power Housing (ATH2000)
BCC2000 (or TLC2000 with ATH2000)
Multi-task dongle: 1.85 x 1.09 x 0.35" (47.1 x 27.9 x 9mm)
Mounting Adapter: 4.9 x 2.7 x 0. 6" (126 x 69 x 14.7mm)
Multi-task dongle: 0.33 oz (9.3g)
USB-C cable: 22.4 oz (635.5g)
Camera mounting adapter: 1.14 oz (32.5g)
Battery Powered
IPX5
1 lbs (453.59g)
2.2 lbs (997.90g)
4712417431648
Models | SKU: BRBCC2PLUS MFR: BCC2000 PLUS $739.99 Temporarily On Backorder Although this item is temporarily on Backorder, you can order it now and it will ship as soon as it arrives. Your card will only be charged once item is shipped. | SKU: BRTLC2020C MFR: TLC2020-C $539.99 In Stock | SKU: BRITLC2020 MFR: TLC2020 $379.00 Special Order Generally ships in 7-14 days, subject to availability |
---|---|---|---|
Special Features | Time-Lapse | Time-Lapse | Day & Night Security, Outdoor & Night Vision, Storage Card Port, Time-Lapse |
Resolution | FHD (1920x1080) | FHD (1920x1080) | FHD (1920x1080) |
Kit Style | Base | Base | - |
Storage Capacity | 128GB | 128GB | - |
Sensor Type | - | - | CMOS |
Chassis Type | Time Lapse | Time Lapse | Time Lapse |
After meticulous design and engineering, the BCC2000Plus Construction Time Lapse Camera Bundle with Extender Kit emerges as a professional, high-quality, and innovative solution for capturing time-lapse footage in challenging construction environments. This advanced bundle pairs our top-selling BCC2000 camera with the AFB1000 Camera Extender Kit, creating an efficient, user-friendly time-lapse system.
The robust Extender Kit features a 32ft (10m) long cable, designed to withstand the unpredictable nature of construction sites. It offers instant access to your camera via your laptop or tablet (Windows 64-bit OS), eliminating the need for frequent SD card changes or LCD screen adjustments.
The BCC2000Plus is designed with user convenience in mind. It allows you to control all common camera functions from the ground, ensuring safety and efficiency on the job site. The Camera Extender Kit (AFB1000) provides ladder-free access to your camera, allowing you to download files, adjust capture intervals, image settings, and recording schedules with ease. You can also monitor your camera's battery life and remaining SD card memory.
The BCC2000Plus offers an upgraded time-lapse experience, providing the freedom to check your camera as needed without the need to climb to great heights. The Power Housing (ATH2000) ensures worry-free battery life, while the Extender Kit's ability to plug into external power makes the BCC2000Plus the optimal solution for long-term filming.
The Brinno Command Center (Windows 64-bit OS) offers an all-in-one camera command and control platform. From here, you can preview camera frames, change settings, and check battery and SD card status. The Extender Kit (AFB1000) allows for simultaneous recording and downloading of time-lapse files without disrupting your filming schedule.
The 32ft ruggedized cable is UV coated and features a special waterproof plug and seal for safe, long-term outdoor use. The IPX5 waterproof Power Housing (ATH2000) provides four-season protection and powers your camera for up to 328 days* using alkaline batteries with a 5-min capture interval.
The industrial-grade Clamp Mount (ACC1000) is designed for extreme durability, securely attaching to a variety of surfaces. Its unique multi-point mounting design allows for adjustable positioning to capture the perfect view angle.
In conclusion, the BCC2000Plus Construction Time Lapse Camera Bundle with Extender Kit is a durable, high-quality, and professional solution for all your construction time-lapse photography needs.